ghc-base-compat-0.13.1-lp160.1.1 RPM for aarch64

From OpenSuSE Leap 16.0 for aarch64

Provides functions available in later versions of 'base' to a wider range of
compilers, without requiring you to use CPP pragmas in your code. See the
<https://github.com/haskell-compat/base-compat/blob/master/base-compat/README.markdown
README> for what is covered. Also see the
<https://github.com/haskell-compat/base-compat/blob/master/base-compat/CHANGES.markdown
changelog> for recent changes.

Note that 'base-compat' does not add any orphan instances. There is a separate
package, '<http://hackage.haskell.org/package/base-orphans base-orphans>', for
that.

In addition, 'base-compat' does not backport any data types or type classes.
See
'<https://github.com/haskell-compat/base-compat/blob/master/base-compat/README.markdown#data-types-and-type-classes
this section of the README>' for more info.

'base-compat' is designed to have zero dependencies. For a version of
'base-compat' that depends on compatibility libraries for a wider support
window, see the '<http://hackage.haskell.org/package/base-compat-batteries
base-compat-batteries>' package. Most of the modules in this library have the
same names as in 'base-compat-batteries' to make it easier to switch between
the two. There also exist versions of each module with the suffix '.Repl',
which are distinct from anything in 'base-compat-batteries', to allow for
easier use in GHCi.

Provides

• ghc-base-compat
• ghc-base-compat(aarch-64)
• libHSbase-compat-0.13.1-IUXqFbKEaLVUTJ5EVtP7m-ghc9.8.3.so()(64bit)

Requires

• libHSarray-0.5.8.0-76fd-ghc9.8.3.so()(64bit)
• libHSbase-4.19.2.0-1d6a-ghc9.8.3.so()(64bit)
• libHSbytestring-0.12.1.0-5950-ghc9.8.3.so()(64bit)
• libHSdeepseq-1.5.1.0-87db-ghc9.8.3.so()(64bit)
• libHSexceptions-0.10.7-e694-ghc9.8.3.so()(64bit)
• libHSfilepath-1.4.200.1-1ffb-ghc9.8.3.so()(64bit)
• libHSghc-bignum-1.3-ded1-ghc9.8.3.so()(64bit)
• libHSghc-boot-th-9.8.3-6a8f-ghc9.8.3.so()(64bit)
• libHSghc-prim-0.11.0-1e4a-ghc9.8.3.so()(64bit)
• libHSmtl-2.3.1-e115-ghc9.8.3.so()(64bit)
• libHSpretty-1.1.3.6-5edd-ghc9.8.3.so()(64bit)
• libHSstm-2.5.3.1-01d4-ghc9.8.3.so()(64bit)
• libHStemplate-haskell-2.21.0.0-a19a-ghc9.8.3.so()(64bit)
• libHStime-1.12.2-5a41-ghc9.8.3.so()(64bit)
• libHStransformers-0.6.1.0-bf2d-ghc9.8.3.so()(64bit)
• libHSunix-2.8.4.0-97b9-ghc9.8.3.so()(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libgmp.so.10()(64bit)
• libm.so.6()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

MIT

Changelog

* Wed Oct 11 2023 Peter Simons <psimons@suse.com>
  - Update base-compat to version 0.13.1.
    Upstream has edited the change log file since the last release in
    a non-trivial way, i.e. they did more than just add a new entry
    at the top. You can review the file at:
    http://hackage.haskell.org/package/base-compat-0.13.1/src/CHANGES.markdown
* Sat May 27 2023 Peter Simons <psimons@suse.com>
  - Update base-compat to version 0.13.0.
    [#]# Changes in 0.13.0 [2023.03.10]
    - Sync with `base-4.18`/GHC 9.6
    - Backport `liftA2` being re-exported from `Prelude.Compat`.
    - `Data.Tuple.Compat`'s `Solo` API now matches what is present in `Data.Tuple`
      in `base-4.18`. In particular, we now re-export both the `MkSolo` and `Solo`
      data constructors when building with `ghc-prim-0.10.0` or later, with
      `MkSolo` being preferred over `Solo`. If you want to backport `MkSolo` to
      earlier versions of GHC, import `Data.Tuple.Compat` from
      `base-compat-batteries` instead.
    - Backport `traceWith`, `traceShowWith`, and `traceEventWith` to `Debug.Trace`.
      Note that `traceEventWith` is only provided when building with `base-4.5` or
      later, as that is the first version of `base` to provide the `traceEvent`
      primitive on which `traceEventWith` is defined.
    - Backport `inits1` and `tails1` to `Data.List.NonEmpty.Compat`.
    - Backport `minusNaturalMaybe` to `Numeric.Natural.Compat`.
    - Backport `applyWhen` to `Data.Function.Compat`.
    - Backport `mapAccumM` and `forAccumM` to `Data.Traversable.Compat`.
    - Backport `heqT` to `Data.Typeable.Compat`. Note that `heqT` is only defined
      when building with `base-4.10` or later, as that is the first version of
      `base` to provide the primitives needed to define `heqT`.
    - Introduce `Data.Foldable1.Compat` and `Data.Bifoldable1.Compat` modules,
      which correspond to changes made in `base-4.18.0.0`. You may consider using
      `base-compat-batteries` instead if you want increase the range of `base`
      versions that are supported.
* Thu Mar 30 2023 Peter Simons <psimons@suse.com>
  - Updated spec file to conform with ghc-rpm-macros-2.5.2.
* Thu Aug 11 2022 Peter Simons <psimons@suse.com>
  - Update base-compat to version 0.12.2.
    [#]# Changes in 0.12.2 [2022.08.11]
    - Sync with `base-4.17`/GHC 9.4
    - Backport `(.^.)`, `(.>>.)`, `(.<<.)`, `(!>>.)`, `(!<<.)`, `oneBits` to
      `Data.Bits.Compat`
    - Backport `pattern TypeRep` to `Type.Reflection.Compat`
* Mon Nov 01 2021 psimons@suse.com
  - Update base-compat to version 0.12.1.
    [#]# Changes in 0.12.1 [2021.10.30]
    - Backport `Solo` to `Data.Tuple.Compat` when building with `ghc-prim-0.7.0`
      or later
* Thu Sep 02 2021 psimons@suse.com
  - Update base-compat to version 0.12.0.
    Upstream has edited the change log file since the last release in
    a non-trivial way, i.e. they did more than just add a new entry
    at the top. You can review the file at:
    http://hackage.haskell.org/package/base-compat-0.12.0/src/CHANGES.markdown
* Thu Dec 17 2020 Ondřej Súkup <mimi.vx@gmail.com>
  - disable %{ix86} build
* Tue Oct 06 2020 psimons@suse.com
  - Update base-compat to version 0.11.2.
    [#]# Changes in 0.11.2 [2020.09.30]
    - Sync with `base-4.15`/GHC 9.0
    - Backport `singleton` to `Data.List` and `Data.List.NonEmpty`
    - Backport `hGetContents'`, `getContents'`, and `readFile'` added to `System.IO`
* Tue Aug 18 2020 Peter Simons <psimons@suse.com>
  - Replace %setup -q with the more modern %autosetup macro.
* Tue Jun 16 2020 Peter Simons <psimons@suse.com>
  - Re-generate file with latest version of spec-cleaner.
* Tue Jan 28 2020 psimons@suse.com
  - Update base-compat to version 0.11.1.
    [#]# Changes in 0.11.1 [2020.01.27]
    - Sync with `base-4.14`/GHC 8.10
    - Backport `isResourceVanishedError`, `resourceVanishedErrorType`, and
      `isResourceVanishedErrorType` to `System.IO.Error.Compat`.
* Sun Dec 29 2019 psimons@suse.com
  - Update base-compat to version 0.11.0.
    [#]# Changes in 0.11.0 [2019.09.06]
    - Sync with `base-4.13`/GHC 8.8
    - Backport `MonadFail(fail)` to `Prelude.Compat` and `Control.Monad.Compat`.
      Because `Prelude.Compat.fail` now corresponds to the `fail` from `MonadFail`
      instead of `Monad`, some care is required to implement `Monad.fail` on
      pre-8.8 versions of GHC. The following template is recommended:
      ```haskell
      import Prelude.Compat
      import qualified Control.Monad      as Monad
      import qualified Control.Monad.Fail as Fail
      data Blah a = ...
      instance Functor Blah where ...
      instance Applicative Blah where ...
      instance Monad.Monad Blah where
      (>>=) = ...
      [#]if !(MIN_VERSION_base(4,13,0))
      fail = Fail.fail
      [#]endif
      instance Fail.MonadFail Blah where
      fail = ...
      ```
      This approach is also backwards-compatible with previous releases of
      `base-compat`.
      Note that the `MonadFail` class has only been in `base` since
      `base-4.9`/GHC 8.0, so accordingly, this can only be backported back
      to GHC 8.0. If you wish to have a version of
      `Prelude.Compat`/`Control.Monad.Compat` that backports
      `MonadFail` to older GHCs (by conditionally depending on the `fail`
      library), use the `Prelude.Compat`/`Control.Monad.Compat` modules from the
      `base-compat-batteries` package.
    - Introduce the `Data.Type.Equality.Compat` module, which re-exports
      `Data.Type.Equality` if using `base-4.7`/GHC-7.8 or later. If using an older
      version of `base`, this module is empty.
      If you wish to have a version of
      `Data.Type.Equality.Compat` with older GHCs
      (by conditionally depending on the `type-equality` library),
      use the `Data.Type.Equality.Compat` module from the
      `base-compat-batteries` package.
* Fri Nov 08 2019 Peter Simons <psimons@suse.com>
  - Drop obsolete group attributes.
* Fri Oct 19 2018 psimons@suse.com
  - Update base-compat to version 0.10.5.
    [#]# Changes in 0.10.5 [2018.10.18]
    - Enable `BangPatterns` in `Prelude.Compat`.
* Wed Jul 18 2018 psimons@suse.com
  - Cosmetic: replace tabs with blanks, strip trailing white space,
    and update copyright headers with spec-cleaner.
* Tue Jul 17 2018 psimons@suse.com
  - Update base-compat to version 0.10.4.
    [#]# Changes in 0.10.4 [2018.07.03]
    - Make more modules `Trustworthy`. In particular, fix a regression in which
      `Prelude.Compat` was inferred as `Unsafe` by explicitly marking it as
      `Trustwothy`.
    [#]# Changes in 0.10.3 [2018.07.02]
    - Backport the proper fixity for `($!)`, which was accidentally omitted in
      `base-compat-0.10.2`.
    [#]# Changes in 0.10.2 [2018.07.02]
    - Sync with `base-4.12`/GHC 8.6
    - Backport `RuntimeRep`-polymorphic versions of `($!)` and `throw` to
      `Prelude.Compat` and `Control.Exception.Compat`, respectively
      (if using `base-4.10`/GHC 8.2 or later).
    - Introduce the `Data.Functor.Contravariant.Compat` module, which reexports
      `Data.Functor.Contravariant` if using `base-4.12`/GHC 8.6 or later.
      See `Data.Functor.Contravariant.Compat` in the corresponding
      `base-compat-batteries` release for a version with a wider support window.
    [#]# Changes in 0.10.1 [2018.04.10]
    - Add `Data.List.NonEmpty.Compat`.
    - Reexport `(Data.Semigroup.<>)` from `Data.Monoid.Compat` back to `base-4.9`.
    [#]# Changes in 0.10.0 [2018.04.05]
    - Sync with `base-4.11`/GHC 8.4
    - Backport `Semigroup((<>))` to `Prelude.Compat`.
      Note that the `Semigroup` class has only been in `base` since
      `base-4.9`/GHC 8.0, so accordingly, this can only be backported back
      to GHC 8.0. If you wish to have a version of `Prelude.Compat` that backports
      `Semigroup` to older GHCs (by conditionally depending on the `semigroups`
      library), use the `Prelude.Compat` module from the `base-compat-batteries`
      package.
    - Backport `(<&>)` to `Data.Functor.Compat`
    - Backport `iterate'` to `Data.List.Compat`
    - Backport `showHFloat` to `Numeric.Compat`
    - Backport a `RuntimeRep`-polymorphic `withTypeable` function to
      `Type.Reflection.Compat`. (This is only exported on `base-4.10`/GHC 8.2.)
    - Introduce the following modules, back until the oldest version of `base`
      that can support backporting them. If you wish to use them in conjunction
      with older versions of `base`, use the `base-compat-batteries` package.
    - `Control.Monad.Fail.Compat` (back until `base-4.9`/GHC 8.0)
    - `Control.Monad.IO.Class.Compat` (back until `base-4.9`/GHC 8.0)
    - `Data.Bifunctor` (back until `base-4.8`/GHC 7.10)
    - `Data.Bifoldable` and `Data.Bitraversable` (back until `base-4.10`/GHC 8.2)
    - `Data.Functor.Compose.Compat`, `Data.Functor.Product.Compat`, and
      `Data.Functor.Sum.Compat` (back until `base-4.9`/GHC 8.0)
    - `Data.Functor.Identity.Compat` (back until `base-4.8`/GHC 7.10)
    - `Data.Semigroup.Compat` (back until `base-4.9`/GHC 8.0)
    - `Data.Void.Compat` (back until `base-4.8`/GHC 7.10)
    - `Numeric.Natural.Compat` (back until `base-4.8`/GHC 7.10)
    - Introduce versions of modules with the suffix `.Repl`. These simply reexport
      the contents of their counterparts without the `.Repl` suffix to provide
      a globally unique namespace to import from in the event one wants to import
      `base-compat` modules into GHCi. (In `base-compat-batteries`, the
      corresponding suffix is `.Repl.Batteries`.)
* Wed May 16 2018 psimons@suse.com
  - Prefer the new %license attribute over %doc.
* Thu Aug 03 2017 psimons@suse.com
  - Updated with latest spec-cleaner version 0.9.8-8-geadfbbf.
* Wed Apr 19 2017 psimons@suse.com
  - Update to version 0.9.3 with cabal2obs.
* Mon Mar 27 2017 psimons@suse.com
  - Update to version 0.9.2 with cabal2obs.
* Sun Jul 10 2016 psimons@suse.com
  - Update to version 0.9.1 revision 0 with cabal2obs.
* Tue Apr 12 2016 mimi.vx@gmail.com
  - update to 0.9.1
    * Use the more efficient version of replicateM and replicateM_ introduced in base-4.9
* Wed Jan 20 2016 mimi.vx@gmail.com
  - update to 0.9.0
    * Sync with base-4.9/GHC 8.0
    * Weakened RealFloat constraints on realPart, imagPart, conjugate, mkPolar, and cis
      in Data.Complex.Compat
    * Backport Foreign.ForeignPtr.Safe and Foreign.Marshal.Safe
    * Generalize filterM, forever, mapAndUnzipM, zipWithM, zipWithM_, replicateM,
      and replicateM_ in Control.Monad from Monad to Applicative
    * Backport .Unsafe.Compat modules (for Control.Monad.ST, Control.Monad.ST.Lazy,
      Foreign.ForeignPtr, and Foreign.Marshal)
    * Backport forkFinally and forkOSWithUnmask to Control.Concurrent.Compat
    * Backport Data.Functor.Const
    * Backport modifyIORef', atomicModifyIORef' and atomicWriteIORef to Data.IORef.Compat
    * Data.Ratio.{denominator,numerator} have no Integral constraint anymore
    * Backport modifySTRef' to Data.STRef.Compat
    * Export String, lines, words, unlines, and unwords to Data.String.Compat
    * Generalize Debug.Trace.{traceM, traceShowM} from Monad to Applicative
    * Backport errorWithoutStackTrace to Prelude.Compat
    * Backport unsafeFixIO and unsafeDupablePerformIO to System.IO.Unsafe.Compat
* Tue Dec 15 2015 mimi.vx@gmail.com
  - initial commit

Files

/usr/lib64/ghc-9.8.3/lib/libHSbase-compat-0.13.1-IUXqFbKEaLVUTJ5EVtP7m-ghc9.8.3.so
/usr/share/licenses/ghc-base-compat
/usr/share/licenses/ghc-base-compat/LICENSE

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Nov 12 00:13:41 2024