| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: lz4 | Distribution: SUSE Linux Framework One |
| Version: 1.9.4 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.7 | Build date: Mon Aug 26 10:51:52 2024 |
| Group: Productivity/Archiving/Compression | Build host: ibs-power9-18 |
| Size: 267865 | Source RPM: lz4-1.9.4-slfo.1.1.7.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://lz4.github.io/lz4/ | |
| Summary: Hash-based Predictive Lempel–Ziv compressor | |
LZ4 is a lossless data compression algorithm that is focused on compression and decompression speed. It belongs to the LZ77 (Lempel–Ziv) family of byte-oriented compression schemes. It is a LZP2 fork and provides better compression ratio for text files. This subpackage provides a GPL command-line utility to make use of the LZ4 algorithm.
BSD-2-Clause AND GPL-2.0-or-later
* Wed Mar 08 2023 mpluskal@suse.com
- Build AVX2 enabled hwcaps library for x86_64-v3
* Tue Aug 16 2022 jengelh@inai.de
- Update to release 1.9.4
* Decompression speed on high-end ARM64 platform is improved,
by ~+20%.
* For the specific scenario of data compressed with -BD4
setting (small blocks, <= 64 KB, linked) decompressed
block-by-block into a flush buffer (like lz4 CLI does),
decompression speed is improved ~+70%.
* For compressed data employing the lz4frame format (native
format of lz4 CLI), it's possible to ignore checksum
validation during decompression, resulting in speed
improvements of ~+40% . This capability is exposed at both
CLI (see --no-crc) and library levels.
* Mon Oct 04 2021 pgajdos@suse.com
- version 1.9.3 fixes also CVE-2021-3520 [bsc#1185438]
* Mon Nov 16 2020 jengelh@inai.de
- Update to release 1.9.3
* api: LZ4_decompress_safe_partial() now supports unknown
compressed size
* api: improved LZ4F_compressBound() with automatic flushing
* cli: multiple files are compressed now using the legacy format
* Wed Oct 16 2019 pgajdos@suse.com
- enable testsuite
- verbose build
* Tue Oct 15 2019 pgajdos@suse.com
- version update to 1.9.2
* decompression functions were reading a few bytes beyond input size
* api: lz4frame initializers compatibility with c++, reported by @degski
* cli : added command --list, based on a patch by @gabrielstedman
* fixes CVE-2019-17543 [bsc#1153936]
* Thu Jun 06 2019 jengelh@inai.de
- Update to new upstream release 1.9.1
* Decompression speed was improved by about 12% (x86/x64).
* New option `lz4 --list` to inspect the block type, checksum
information, compressed and decompressed sizes (if present). The
command is limited to single-frame files for the time being.
* Fri Oct 12 2018 astieger@suse.com
- lz4 1.8.3:
* minor decompression speed improvement (~+2%) with gcc
* fix corruption in v1.8.2 at level 9 for files > 64KB under
rare conditions
* Add new command --fast
* api: LZ4_decompress_safe_partial() now decodes exactly the
number of bytes requested
* Thu Jun 28 2018 astieger@suse.com
- lz4 1.8.2:
* speed inprovemtns for compression and decompression
* fix compression compatible with low memory addresses
* fix decompression segfault when provided with NULL input
* cli: new command --favor-decSpeed
* cli: benchmark mode more accurate for small inputs
* Wed Feb 07 2018 avindra@opensuse.org
- Update to new upstream release 1.8.1.2
* Most visible new feature is support for dictionary compression
* Support is now more formally added on the API side within
lib/lz4frame_static.h. It's early days, and this new API is
tagged "experimental" for the time being.
* Support is also added in the command line utility lz4, using
the new command -D. The behavior of this command is identical
to zstd, should you be already familiar.
* lz4 doesn't specify how to build a dictionary. All it says is
that it can be any file up to 64 KB.
* This approach is compatible with zstd dictionary builder, which
can be instructed to create a 64 KB dictionary.
* Improved performance at ultra settings (levels 10+).
* These levels receive a new code, called optimal parser,
available in lib/lz4_opt.h.
* New parser uses less memory (from 384KB to 256KB), performs
faster, compresses a little bit better (not much, as it was
already close to theoretical limit), and resists pathological
patterns which could destroy performance.
* New parser is directly compatible with lower compression levels,
which brings additional benefits:
+ Compatibility with LZ4_*_destSize() variant, which reverses
the logic by trying to fit as much data as possible into a
predefined limited size buffer.
+ Compatibility with Dictionary compression, as it uses the
same tables as regular HC mode
* In the future, this compatibility will also allow dynamic change
of compression level.
* Small set of bug fixes and improvements:
+ perf : faster and stronger ultra modes (levels 10+)
+ perf : slightly faster compression and decompression speed
+ perf : fix bad degenerative case
+ fix : decompression failed when using a combination of
extDict + low memory address
+ cli : support for dictionary compression (-D)
+ cli : fix : lz4 -d --rm preserves timestamp
+ cli : fix : do not modify /dev/null permission as root
+ api : _destSize() variant supported for all compression
levels
- partial cleanup with spec-cleaner
- drop lz4-use-shlib.diff, breaks build
- misc spec cleanups
- remove Makefile fix
- build and install separately
- New URL
* Fri Aug 25 2017 jengelh@inai.de
- Update to new upstream release 1.8.0
* cli: fix: do not modify /dev/null's permissions.
* cli: added POSIX separator "--" for specifying that all
following arguments are non-options.
* cli: restored -BX command enabling block checksum.
* API: added LZ4_compress_HC_destSize() and
LZ4F_resetDecompressionContext().
* API: lz4frame: negative compression levels trigger fast
acceleration.
* API: lz4frame: ability to control block checksum and
dictionary ID.
* API: fix: expose obsolete decoding functions
* API: experimental: lz4frame_static.h:
new dictionary compression API
* doc: Updated LZ4 Frame format to v1.6.0, restoring
Dictionary ID field in header.
- Add lz-export.diff
* Tue Aug 15 2017 ddiss@suse.com
- Use official upstream repository; (boo#1053910)
* Wed Jul 05 2017 jengelh@inai.de
- Update to new upstrema release 1.7.5 (2017-01-03)
* back to the old version scheme
* lz4hc: new compression levels 10-12
- Remove lz4-soversion.diff (not needed),
lz4-killdate.diff (no longer needed)
* Mon Jan 16 2017 dimstar@opensuse.org
- Add baselibs.conf: provide liblz4-1_7 as -32bit compatibility
package, required by systemd-32bit.
* Sat Apr 02 2016 jengelh@inai.de
- Update to new upstream release 131 (library 1.7) (boo#973735)
* slightly improved decoding speed
* lz4frame API is included in liblz4
* new -m command line option to compress multiple files
* new lz4 and lz4hc compression API (old one retained)
* Fri Nov 28 2014 jengelh@inai.de
- Update to version 1.4+svn124
* LZ4F_compressBound() may be called with NULL preferencesPtr
* LZ4_loadDict now returns the dictionary size instead of 1
on success
- Add lz4-soversion.diff to address ABI changes
* Wed Oct 01 2014 jengelh@inai.de
- Update to version 1.3.1+svn123
* Added a pkgconfig file
* Fix a LZ4HC streaming bug
* Updated the framing specificaiton to 1.4.1
* Wed Jul 16 2014 jengelh@inai.de
- Update to svn revision 119, set version to 1.2.0 (based upon
Makefile contents; it's still odd to see the 1.4 Windows release)
* Provide LZ4 as a shared library
- Remove lz4-automake.diff (no longer deemed necessary)
- Add lz4-use-shlib.diff
* Mon Nov 25 2013 dsterba@suse.com
- update to svn 108, set version to 1.4 (current windows release)
- added manpage
- minor code updates
* Tue Sep 03 2013 jengelh@inai.de
- Update to new snapshot svn102; set version as 1.3.3 in accordance
with latest Windows releases.
* Add lz4-killdate.diff (kill the ungodly __DATE__s)
* Thu Feb 21 2013 jengelh@inai.de
- I hate %makeinstall (it fails all the SLES builds), kill it!
* Sat Mar 17 2012 jengelh@medozas.de
- Initial package for build.opensuse.org
/usr/bin/lz4 /usr/bin/lz4c /usr/bin/lz4cat /usr/bin/unlz4 /usr/share/man/man1/lz4.1.gz /usr/share/man/man1/lz4c.1.gz /usr/share/man/man1/lz4cat.1.gz /usr/share/man/man1/unlz4.1.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Fri Nov 8 23:52:26 2024