| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: dfu-tool | Distribution: SUSE Linux Framework One |
| Version: 1.9.16 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.6 | Build date: Wed Aug 21 19:25:08 2024 |
| Group: Development/Tools/Other | Build host: s390zl34 |
| Size: 108504 | Source RPM: fwupd-1.9.16-slfo.1.1.6.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://fwupd.org/ | |
| Summary: Generic tool Device Firmware Upgrade (DFU) tool | |
A generic tool to upload firmware to USB Devices based on Device Firmware Upgrade (DFU).
GPL-2.0-or-later AND LGPL-2.1-or-later
* Mon Apr 08 2024 dimstar@opensuse.org
- Update to version 1.9.16:
+ This release adds the following features:
- Prefer zstd over xz for metadata.
- Relicense a few remaining plugin files to LGPL-2.1+.
+ This release fixes the following bugs:
- Correctly record UEFI success if adding ESRT nodes.
- Defer the DP Aux MST scanning on hotplug to workaround a
kernel bug.
- Do not do the post-update version check if the device
needs-reboot.
- Fix a fastboot warning when loading device.
- Fix a possible warning in fwupdmgr when excluding releases.
- Fix a qsi-dock warning when writing chunks.
- Ignore attribute-changed to work around a regression in
macOS.
- Ignore ZFS zvols when finding the default ESP.
- Mark Pluton TPMs as part of the main CPU.
- Put the fwupd-efi verbose debugging in the journal.
- Recognize zfsbootmenu in ESP detection heuristic.
+ This release adds support for the following hardware:
- Acer T34 and U33 docks.
- Qualcomm Series 5 Gen 1 and Gen 2 and Series 3 Gen 1 and
Gen 2 devices.
- Several Puya SPI chips.
- VIA VL822 C0.
* Fri Apr 05 2024 dimstar@opensuse.org
- dbxtool is built unconditionally on all architectures: move it
out of the condition in the files section and also
unconditionally provide/obsolete the old version.
* Tue Mar 12 2024 dimstar@opensuse.org
- Update to version 1.9.15:
+ This release adds the following features:
- Allow loading in parameters for the test device from
fwupd.conf.
- Ensure LVFS remotes are changed from .gz to .xz.
- Store the install duration in the history database.
+ This release fixes the following bugs:
- Drop OverrideESPMountPoint references in uefi-capsule.
- Fix a potential double-free when writing AVer firmware.
- Only request the BOS descriptor when bcdUSB > 0x0200.
- Use the root device order when sorting device children.
* Tue Feb 27 2024 info@paolostivanin.com
- Update to version 1.9.14:
* Correctly detect ARM32 and RISC-V UEFI binaries.
* Correctly migrate the database schema from very old fwupd versions.
* Fix DS-20 descriptors by opening the GUsbDevice earlier.
* Fix updating the fingerprint reader on the Framework 13 and 16 laptop.
* Fix warning when probing devices using the metadata allowlist.
* Only recover the version format for specific devices.
* Thu Feb 08 2024 dimstar@opensuse.org
- Update to version 1.9.13:
+ This release adds the following features:
- Add a timer inhibit if the daemon took a long time to
startup.
- Add a concept of 'Test Mode' rather than enabling specific
plugins.
- Do not idle-quit the daemon if there is a connected D-Bus
client.
+ This release fixes the following bugs:
- Allow plugins to opt-out of the child-device first depsolve.
- Allow setting multiple flags in LVFS::DeviceFlags.
- Do not migrate config comments for removed keys.
- Do not request the Advantech BMC to reboot.
- Do not warn the user about ESP when using MBR.
- Fix a critical warning when adding a PixArt wireless device.
- Fix migration of legacy config files.
- Only save config values to the mutable config file.
- Parse DS-20 descriptors earlier in device setup.
- Store the version format in the history database to fix
offline reports.
- Use the correct GUID for matching realtek-mst and
parade-lspcon.
+ This release adds support for the following hardware:
- GoodWay Acer Dock.
* Wed Jan 24 2024 dimstar@opensuse.org
- Update to version 1.9.12:
+ This release adds the following features:
- Add remote modification support to fwupdtool
- Add support for more modify-config options
- Generate HTML pages for all man pages
+ This release fixes the following bugs:
- Assume the legacy LVFS::UpdateRequestId tag is non-generic
- Avoid crashing the daemon if not using udisks
- Correctly mark the CPU as supported
- Correctly match invalid EFI partitions
- Do not change the device status until the action has
completed
- Do not require systemd for fwupdtool modify-config
- Enable access to the home interface for snap
- Fix an assertion when enabling lvfs-testing for the first
time
- Fix a possible crash in fwupdtool build-cabinet
- Handle systems with more than one ccp device
- Only check AMD CPUs for SHSTK, not IBT
- Only write the mutable fwupd.conf with the current values
- Re-evaluate supported every time pci-psp attributes are
refreshed
- Show "CET OS support" on AMD systems too
+ This release adds support for the following hardware:
- AVer CAM340plus
- AVer VB342 Pro
- More Algoltek devices
* Sat Jan 13 2024 dennis.tseng@suse.com
- Fix build failure on s390x and ppc64le
+ This release modifies spec file
- add s390x and ppc64le into default 'with efi_fw_update'
so that old dbxtool version can be obsoleted.
* Thu Jan 04 2024 dimstar@opensuse.org
- Update to version 1.9.11:
+ This release adds the following features:
- Allow exporting 'offline' reports for manual upload
+ This release fixes the following bugs:
- Add some recovery partition names to ignore for ESP selection
- Check for CET and SMAP on non-Intel x86 processors too
- Correctly mark the CPU as supported in the HSI tests
- Do not fail on probing downstream Synaptics MST ports
- Do not offer to change BIOS settings that are already set
- Do not prefer msftdata when choosing the default ESP
- Do not show spurious device request flags
- Fix a missing build dependency to fwupdplugin-self-test
- Fix a segfault when using zlib-ng instead of zlib
- Fix updating Jabra 410, 510, 710 and 810 devices
- Match more community-supported branches
- Remove the Intel SPIBAR proxy support as the mtd module works
- Show a better error when the ESP is missing
- Show an error if the post-update version does not match exactly
- Speed up Synaptics MST device enumeration
+ This release adds support for the following hardware:
- Algoltek USB devices
- Luxshare Quad USB4 Dock
* Wed Dec 20 2023 dimstar@opensuse.org
- Own %{_modulesloaddir}: used to be present via udev-mini -> kmod
- > suse-module-tools dependency before.
* Mon Dec 04 2023 info@paolostivanin.com
- Update to version 1.9.10:
+ This release adds the following features:
- Add support for not_hardware requirements
- Add support for loongarch64
- Add support for per-release priority attributes
- Make USB claim retry count configurable across devices
+ This release fixes the following bugs:
- Compare the HID report value when checking for duplicates
- Consider the component priority when installing composite updates
- Deploy the CCGX firmware correctly the first time
- Do not export the 'main-system-firmware' and 'cpu' GUIDs
- Enforce fwupd version requirements client side
- Fix Genesys 'failed to get static tool info from device' error
- Fix potential 'dereference before null check' in ccmx-dmc
- Fix the 'already registered private FuMmDevice flag with value' warning
- Fix the 'assertion backend_id != NULL failed' runtime warning
- Fix Wacom USB device emulation by recording the composite phases
- Generate generic request message text where possible
- Hide HTTP passwords in fwupd debugging logs
- Let the client know what interaction is expected
- Make all critical warnings into backtraces for non-release builds
- Never obsolete the wrong HSI attribute
- Never show a HSI index that is impossible
- Only apply fastboot plugin to modem devices supporting fastboot
- Only send interactive requests when the sender is alive
- Remove the now-obsolete Synaptics MST cascade device scanning
- Replace the Redfish KCS user if required
- Restrict mediatek-scaler devices on specific hardware only
- Skip any recovery partitions when detecting ESP
* Tue Nov 21 2023 dimstar@opensuse.org
- Update to version 1.9.9 (boo#1217295):
+ This release adds the following features:
- Add a new generic request for the device power cable.
+ This release adds support for the following hardware:
- Lenovo X1 Yoga Gen7 530E.
- Advantech BMC devices.
* Thu Nov 16 2023 dimstar@opensuse.org
- Re-add fwupd-bsc1130056-change-shim-path.patch: patch was dropped
in error (boo#1217138).
* Wed Nov 15 2023 dimstar@opensuse.org
- Update to version 1.9.8:
+ This release adds the following features:
- Add a DP AUX device subclass and port the Synaptics MST
plugin to it
- Add a feature flag for non-generic requests where
translations are required
- Hide generic VID/PIDs to avoid accidental firmware matches
- Optionally set the modem carrier configuration as the branch
name
- Rename 'fwupdmgr sync-bkc' to 'fwupdmgr sync' and also
consider the branch
- Require additional requirements for devices using non-OEM USB
VIDs
- Set the waiting-for-user status when sending a request
- Support uSWID SBoM data with LZMA compressed payloads
+ This release adds support for the following hardware:
- Kinetic SST/MST DisplayPort converters
- Wacom Cintiq Pros (DTH172, DTH227)
* Thu Nov 09 2023 dimstar@opensuse.org
- Do not pass -Dsystemd_unit_user=root to meson: use fwupd's
defautl fwupd_refresh user (boo#1216973).
* Thu Nov 02 2023 dimstar@opensuse.org
- Disable passim support for now. For openSUSE users this is likely
less intereting that it would be for enterprise customers.
* Wed Nov 01 2023 dimstar@opensuse.org
- Update to versrion 1.9.7:
+ This release adds the following features:
- Add support for child device requirements in metadata.
- Allow to have more than one host BKC.
- Delete BootNext as a post-reboot action to work around broken
firmware.
- Parse cabinet archives internally without libgcab.
- Use close-ended mode for eMMC FFU to speed up firmware
updates.
+ This release adds support for the following hardware:
- Logitech Rally System devices.
- More PixartRF HPAC devices.
- More Synaptics Prometheus fingerprint readers.
- Some Western Digital eMMC devices.
- VIA VL830 and VL832.
* Fri Oct 20 2023 dimstar@opensuse.org
- Update to version 1.9.6:
+ This release adds the following features:
- Add a launchd agent for macOS.
- Add a new security attribute for BIOS capsule updates to be
enabled.
- Add functionality to fix specific host security attributes.
- Add global information from the context into the report data.
- Add support for coSWID payload sections.
- Add support for parsing the EDID.
- Allow adding only-quirk instance IDs from quirk files.
- Install a sysusers.d systemd file when using
- Dsystemd_unit_user.
+ For The changes of 1.9.0…1.9.5, please consult
https://github.com/fwupd/fwupd/releases
- Add pkgconfig(passim) BuildRequires: new dependency.
- Pass -Dplugin_amdgpu=disabled to meson: not buildable just yet.
- Pass -Dlaunchd=disabled to meson: launched is MacOS only.
- Drop -Dplugin_dell=enabled meson parameter: no longer supported.
- Drop fwupd-bsc1130056-change-shim-path.patch: no longer
applicable.
* Fri Sep 15 2023 gmbr3@opensuse.org
- Remove protobuf-c BR: SLE now matches TW package layout
- Remove gnu-efi BR: efi binary is in fwupd-efi
* Sat Jul 22 2023 bjorn.lie@gmail.com
- Update to version 1.8.17:
+ Correctly obtain the Thunderbolt is_native controller
attribute.
+ Fix a Wacom emulation failure on s390x.
+ Only allow --force on security attributes for unsupported
builds.
+ Reduce the amount of RSS by ~12% at startup.
* Wed Jul 05 2023 schwab@suse.de
- Enable efi_fw_update on riscv64
- fwupdagent and dfu-tool are only built %{with efi_fw_update}
* Tue Jun 13 2023 bjorn.lie@gmail.com
- Update to version 1.8.16:
+ Auto-detect the OEM BCM57xx PCI cards with double the available
EEPROM
+ Beep the console when waiting for user input
+ Do not assume a file descriptor of zero is invalid
+ Fix high memory usage when writing a carefully crafted EFI
filesystem
+ Ignore refresh on a non-download remote to fix old versions of
KDE
+ Limit the maximum number of file objects in the EFI filesystem
+ Only add the supported DFU attributes as private flags
+ Show devices with problems in fwupdmgr get-upgrades
+ Update official Intel GPU product names
- Changes from version 1.8.15:
+ Add the latest dbx fixups for BlackLotus
+ Allow fwupd-refresh.timer trigger once per hour
+ Fix a crash when converting HFSTS1 values
+ Fix the version detection for SteelSeries Bluetooth mode
+ Invalidate the XMLb cache when installing new fwupd versions
+ Trigger the passive flow for usb4 from dell-dock
+ New hardware support: More Logitech Unifying receivers, Nordic
MCUboot and nRF52 Desktop Keyboard
- Changes from version 1.8.14:
+ Fix possible crash when getting UEFI report metadata
+ Fix 'fwupdmgr install FILE GUID'
- Changes from version 1.8.13:
+ New features:
- Add pcap converter which allows emulating devices from a
Wireshark dump
- Add the ability to dump TPM firmware for future use
- Optionally retain firmware in a backup remote
- Record the ESP type in the firmware report sent to the LVFS
+ Bugs fixed:
- Accept application/octet-stream for archives when the mime
database is missing
- Add the latest dbx version version fixups as Microsoft
removed another entry
- Assume DFU appIDLE if GetStatus is not implemented
- Do not require signatures for local or directory remotes
- Do not use pandoc to build the man pages
- Enhance Qubes functionality to use JCat
- Fix a CCGX 'usbfs: process did not claim interface 1 before
use' warning
- Fix a compile warning when using a new libqmi version
- Fix a critical warning when parsing an empty kernel cmdline
- Fix a synaptics-cape regression where the firmware pauses for
INTR
- Fix the defines for HFSTS6 enforcement policy
- Fix the i2c name properly for ElanTP hardware
- Fix the name of the MTD Intel SPI controller
- Set the release remote when installing archives
- Use the powerd power type information to better set AC levels
+ New hardware:
- Framework Audio Card
- Lenovo ThinkPad TBT3-TR Gen 2
- Wacom Intuos BT S Gen 3
- Update options passed to meson following upstream changes.
* Fri Mar 10 2023 dimstar@opensuse.org
- Introduce docs flag, set to 0: do not build documentation using
pandoc: ghc is not part of the rings and we don't want this
there.
* Thu Mar 02 2023 dimstar@opensuse.org
- Update to version 1.8.12:
+ Allow setting the package user agent before the client has
connected.
+ Fix a small memory leak when refreshing metadata.
- Changes from version 1.8.11:
+ Add support for replaying USB devices so they can be emulated
in CI.
+ Allow desktop software to inhibit the system to prevent
updates.
+ Allow using requirements with depth=0 and no parent.
+ Auto-set the CCGX remove-delay now we parse DMC subcomponents.
+ Detect and warn users with the broken NVMe firmware 3B2QGXA7.
+ Print errors as JSON objects when using fwupdmgr --json.
- Changes from version 1.8.10:
+ Add a PE/COFF firmware parser to allow reading coSWID SBoM
data.
+ Allow dumping CFI SPI chips using devices like CH341a.
+ Refactor the HWIDs functionality to include FDT data.
- Rebase fwupd-bsc1130056-change-shim-path.patch.
- Drop uefi-capsule-Do-not-call-grub2-probe-without-argumen.patch:
fixed upstream.
- Add -Dcompat_cli=true meson parameter: keep compat binaries for
the time being.
- Add xz-devel BuildRequires: needed to link liblzma.
* Wed Jan 18 2023 msuchanek@suse.com
- Fix error generating grub.cfg when an update is available.
+ uefi-capsule-Do-not-call-grub2-probe-without-argumen.patch
* Wed Jan 04 2023 info@paolostivanin.com
- Update to 1.8.9:
+ This release adds the following features:
- Add an interactive request for re-inserting the USB cable
- Add SHA384 support for TPM hashes
- Add X-FingerprintReader, X-GraphicsTablet, X-Dock and X-UsbDock categories
- Allow specifying OR parent requirements in metadata
+ This release fixes the following bugs:
- Add the fwupd version to the HSI result if the chassis is invalid
- Allow getting the ESP when there is a block device with no filesystem
- Allow reinstalling on devices with only-version-upgrade set
- Do not require the TPM event log to have all reconstructions
- Fix a tiny memory leak when parsing signed reports
- Ignore failure to mount the ESP if unsupported
- Never allow using SHA-1 for checksum validation
- Return a more useful error if USB recovery failed
- Skip the fwupdx64.efi BootXXXX entry when measuring system integrity
- Speed up daemon startup using prepared XPath queries
- Suggest to turn on ThunderboltAccess for Lenovo systems
- Use better defaults if the config file is missing
+ This release adds support for the following hardware:
- More Solidigm NVMe devices
- More Synaptics Cape devices
- More Synaptics Prometheus devices
- Most Texas Instruments USB-4 docks
- Scaler support for Wacom USB devices
- Several new Wistron USB-C docks
* Mon Dec 26 2022 bjorn.lie@gmail.com
- Update to version 1.8.8:
+ This release adds the following features:
- Add BIOS rollback protection support for Dell and Lenovo
systems
- Generate OVAL rules for openSCAP evaluation
- Show the signed reports from QA teams in client tools
+ This release fixes the following bugs:
- Add a X-Gpu category for new hardware support
- Add more ChromeOS metadata to the report attributes
- Ensure the device name is set for Intel USB4 devices
- Fix a critical DFU CSR warning when deploying firmware
- Fix a Synaptics RMI issue when updating non-secure devices
- Match more device properties when using GetDetails
- Move AMD platform rollback protection to level 4
- Use the correct AppStream ID for the Key Manifest failure
- Wait for the Intel GPU to come back after updating
+ This release adds support for the following hardware:
- Logitech Whiteboard cameras
- More Goodix MoC devices
- Several QSI Docks
* Thu Nov 10 2022 bjorn.lie@gmail.com
- Update to version 1.8.7:
+ This release adds the following features:
- Add a new HSI check for the leaked Lenovo 'Key Manifest'
hashes
- Measure system integrity when installing UEFI updates
- Record more host DMI data when submitting a report for dbx
failures
- Use xz-compressed metadata to reduce bandwidth used by ~25%
+ This release fixes the following bugs:
- Add documentation for three existing HSI attributes
- Add re-insert requirement for Analogix devices
- Allow parsing metadata more than 1MB in size
- Do not follow symlinks when searching for ESP devices
- Ensure the config file permission is correct for built-in
plugins
- Fix a compile failure when compiling without efiboot
- Fix a regression when using fwuptool install-blob with FMAP
firmware
- Only count the Microsoft hashes when getting the dbx version
- Only use the IFD when the system is Intel-based
- Support loading CoSWID when only one role has been set
+ This release adds support for the following hardware:
- Anker Thunderbolt 4 Mini Hub
- ELAN haptic hardware
- Fingerprint lenfy devices
- Goodix GF3258WNC
- Intel discrete GPUs (experimental)
- More Star Labs laptops
- QSI Godzilla Creek Reference Hub
- Stop passing conditional plugin_amt=disabled, no longer needed,
nor recognized.
* Thu Nov 03 2022 dennis.tseng@suse.com
- For pushing fwupd-1.8.6 to 15-SP5 (fwupd-1.7.3), sync change log:
(jsc#PED-1232)
- fwupd-bsc1193921-nvme-ignore-non-PCI-NVMe-devices.patch
be merged to fwupd-1.7.3
* Fri Oct 14 2022 bjorn.lie@gmail.com
- Update to version 1.8.6:
+ This release adds the following features:
- Reduce the installed package size by more than 30%
- Translate more interactive messages
+ This release fixes the following bugs:
- Allow disabling a DFU device when required
- Fix a regression when getting the i2c bus number
- Fix a small memory leak when reloading the parade-lspcon
device
- Fix installing the dbx update when using fwupdtool
- Improve writing CoSWID and uSWID metadata
- Only include the last 5 releases in the installed metainfo
file
- Only request the BOS descriptor for newer libgusb versions
- Prevent high memory usage when loading corrupt SREC files
- Try harder when trying to find the default ESP volume
- Use a higher compression preset for the UEFI splash images
+ This release adds support for the following hardware:
- Focaltech touchpads
- FPC fingerprint readers
- Supermicro machines using Redfish
- Drop plugin_sover define, and sub-packages libfwupdplugin7 and
typelib-1_0-FwupdPlugin-1_0 following upstream changes.
* Fri Sep 30 2022 bjorn.lie@gmail.com
- Update to version 1.8.5:
+ This release adds the following features:
- Add a new android-boot plugin to update specific block
devices
- Add new plugin to display SMU firmware version on AMD APU/CPU
- Add support for platform capability descriptors so devices
can set quirks
- Move the generic Intel Goshen Ridge code out to a new plugin
+ This release fixes the following bugs:
- Allow specifying the ESP when applying the dbx update
- Always check the BDP partitions when getting all the possible
ESPs
- Correctly update Wacom AES devices
- Disable changing sleep mode on Ryzen 6000 systems
- Do not show the 'may not be usable while updating' message
for DBX updates
- Expose Pine64 PinePhone Pro MTD as Tow-Boot
- Fix a critical warning when issuing Secure Boot modem AT
commands
- Fix a fuzzing crash when parsing malicious FDT data
- Fix aligning up addresses greater than 4GB
- Fix a possible crash when dumping VBE firmware
- Fix a possible critical warning when parsing cabinet archives
- Fix a regression when parsing pixart-rf firmware
- Fix a small memory leak when parsing UF2 files
- Fix checking for invalid depth requirements
- Fix parsing the coSWID firmware ID when encoded as a UUID
- Fix parsing uSWID uncompressed metadata
- Fix uploading to DFU-CSR devices
- Limit the archive size to 25% of the RAM, or 4G
- Load coSWID metadata from a uSWID MTD block device
- Never save the Redfish auto-generated password to a
user-readable file
- Only create users using IPMI when we know it's going to work
- Write all the CCGX metadata block as intended
+ This release adds support for the following hardware:
- Corsair SABRE RGB PRO Gaming mouse
- More Sonix CAM devices
- More Intel Goshen Ridge USB-4 docks
- Changes from version 1.8.4:
+ This release adds the following features:
- Add a translated title and long description for HSI security
attributes
- Add support for loading a machine-default BIOS settings
policy
- Add support for reading and writing BIOS settings
- Allow loading BIOS settings for host emulation
- Prompt users to fix some BIOS configuration issues
+ This release fixes the following bugs:
- Actually show provided AppStream security issues
- Add Quectel secure boot status AT commands
- Correctly detect CET IBT
- Do not assert when running with no plugins
- Do not require UEFI capsule updates for checking TPM PCR0
- Do not show HSI events where we changed the spec result value
- Fix applying the latest DBX update
- Include vfat in the list of possible BDP partition types
- Install all devices with the same composite id in fwupdtool
- Only fail the kernel HSI test for specific taint reasons
- Only show changed events in fwupdmgr security
- Update vulnerable CMSE versions from CSMEVDT data
+ This release adds support for the following hardware:
- Elan non-HID touchpads
- Google Prism
- LabTop Mk III
- ThinkPad Thunderbolt 4 Dock
- ThinkPad Universal Smart Dock
- Changes from version 1.8.3:
+ This release adds the following features:
- Add resolution flags to each security attribute failures for
the user
- Allow loading in emulated host profiles for debugging
- Check if Intel TME has been disabled by the firmware or
platform
- Wait for the system to acquiesce after doing each update
+ This release fixes the following bugs:
- Do not use CoD even when advertized on non-aarch64 platforms
- Fix a crash when updating the Logitech Bolt radio device
- Fix a critical warning when parsing an invalid PHAT record
- Fix a critical warning when parsing invalid FDT firmware
- Fix fwupdmgr security when plugins are added to the blocklist
- Fix parsing SMBIOS data to correct the device hardware IDs
- Fix uploading signed reports by sending the correct checksum
- Use the correct protocol attribute name when exporting to
JSON
+ This release adds support for the following hardware:
- Additional Startech devices
- Additional Elan fingerprint readers
- Changes from version 1.8.2:
+ This release adds the following features:
- Add startup profiling which allowed us to speed up daemon
startup considerably
- Add support for OptionROM, CPD and FPT firmware formats for
future hardware
- Add the HostVendor to the D-Bus interface
- Break some internal ABI and add a conversion helper for
out-of-tree plugins
- Optionally build the quirk files into the daemon binary to
reduce installed size
+ This release fixes the following bugs:
- Allow front-end clients to read the percentage property
- Allow more quirk entries to add multiple items
- Allow to force install Genesys firmware even if the
public-key does not match
- Allow UFS disks to define the signed status in metadata
- Autoconnect the Redfish network device when rebooting the BMC
- Copy the instance ID strings when incorporating devices
- Do not generate a capsule header for the FMP GUID
- Ensure more firmware formats can round-trip to and from XML
- Fix a regression for devices using the Atmel FLIP Bootloader
- Fix running fwupdtool security with a user-specified plugin
allowlist
- Handle ENOTTY with the correct error code for ioctl calls
- Increase the self tests coverage substantially
- Modernize the AMT plugin and split out common MEI
functionality
- Only move the logitech-bulkcontroller progressbar forwards
when writing
- Set the device ID on the FwupdRequest to allow better UX
- Show the get-details output when the device requirements fail
- Simply quirk matching for i2c devices to speed up daemon
startup
- Support SHA256 fastboot hashes if specified
- Use force-detach to bypass the DFU streaming check for camera
devices
- Use the SCSI target to correctly set the physical ID
- Wait for the System76 launch device to re-enumerate if
already unlocked
+ This release adds support for the following hardware:
- Corsair HARPOON RGB Wireless mouse
- U-Boot devices writing simple FIT images
- Genesys M27fd AIM101
- More PixArt wireless devices
- More Steelseries HID, Sonic and Fizz devices
- System76 launch_2
- Changes from version 1.8.1:
+ This release adds the following features:
- Add archive writing support for devices with composite
firmware
- Add a way to read device composite firmware in fwupdtool
- Allow clients to opt-in to showing updates with user-solvable
problems
- Allow the device to pause polling when writing firmware
- Export the system and device battery levels on the D-Bus
interface
- Log errors and warnings to the win32 eventlog when required
- Add X-UsbReceiver as an update category with icon
usb-receiver
+ This release fixes the following bugs:
- Accurately return the last-set status to client tools
- Allow dumping flashrom firmware using fwupdtool
- Allow specifying a non-file D-Bus transport
- Allow to request post actions from fwupdtool
- Always be arch-explicit when installing OS deps
- Be more resilient when restarting the Redfish BMC
- Do not mark all Redfish updates as UPDATABLE
- Do not use 'dongle' to describe USB receiver hardware
- Download in-process when using fwupdtool
- Fix a critical warning on failed modem update
- Fix regression when probing PS175 devices
- Hardcode the Redfish filedata name to firmware.bin
- Set the Bluetooth version if REV has been set
- Switch the Windows installer from NSIS to MSI
- Use StartServiceCtrlDispatcherA for the daemon on Windows
- Use the native certificate store on Windows
+ This release adds support for the following hardware:
- Corsair KATAR PRO XT, SABRE PRO and KATAR PRO Wireless
- HP Thunderbolt Dock G4
- Lenovo ThinkPad Universal USB-C Dock
- More PixArt wireless devices
- More SunplusIT USB cameras
- Some UFS devices
- Steelseries Aerox 3 Wireless and Rival 3 Wireless
- Changes from version 1.8.0:
+ This release adds the following features:
- Add a new attribute for CPUs supported by HSI
- Add coSWID and uSWID parsers to libfwupdplugin for initial
SBoM support
- Add new HSI attributes for the AMD PSP and various other
system protections
- Add the runtime fwupd-efi version as a firmware requirement
- Allow 'fwupdmgr install' to install a specified firmware
version
- Allow overriding the detected machine type for debugging and
development
- Restart the BMC after installing BCM updates
- Show the device serial number and instance IDs by default
- Support dumping the MTD image to a firmware blob
- Take a device inhibit when updating a device
- Use the CFI manufacturer ID to set the vendor
- Use the correct icon automatically for more hardware
+ This release fixes the following bugs:
- Add signed-payload metadata for more devices
- Allow Capsule-on-Disk to work in more cases
- Allow quirking the detected flashrom flash size
- Check for os-release on FWUPD_SYSCONFDIR
- Check the alignment when parsing raw firmware
- Check the update protocol exists when checking requirements
- Convert the build system to use meson tristate features
- Correctly probe USB-2 hubs with more than 7 ports
- Do not add the Windows compatibility ID to capsule devices
- Do not allow the DBX update for specific motherboards
- Do not expect KernelCmdline on Windows
- Do not export USB4 host controllers as updatable if they
don't have unique GUIDs
- Do not fallback to audio-card and use a more suitable icon
for USB hubs
- Do not hardcode the libexecdir to /usr/libexec
- Do not leak child processes when canceling
- Do not show unconnected or unreachable devices in the client
tools
- Do not throw away the TPM eventlog when uploading to the LVFS
- Do not use /var/run for the socket
- Export the version_lowest_raw value correctly
- Fix build for MacOS and add to the CI matrix
- Fix eventlog replay for Intel TXT machines
- Fix several small memory leaks
- Fix writing large mtd images than 10kb
- Ignore MTD devices that report EPERM on open
- Mark the ME region device locked if it is read only
- Never send the DeviceChanged signal with old data
- Only show the CLI time remaining for predictable status
phases
- Respect the NO_COLOR env variable
- Return the correct error when there is no GPIO device to open
- Support the new UPower PENDING device states
+ This release adds support for the following hardware:
- CH341A SPI programmer
- Corsair Sabre RGB PRO and Slipstream USB receiver
- Genesys GL3521 and GL3590 hubs
- Google Servo Dock
- Logitech M550, M650 and K650
- More ELAN fingerprint readers
- More integrated Wacom panels
- More NovaCustom machines
- More StaLabs StarLite machines
- More Tuxedo laptops
- Quectel EM05
- FlatFrog devices
- System76 launch_lite_1
- Rebase patches with quilt.
- Use ldconfig_scriptlets macro for post(un) handling.
- Add shlib_sover define and set it to 2, ease future updates.
- Add plugin_sover define and set it to 7, ease future updates, and
rename libfwupdplugin5 to libfwupdplugin7 following upstream
changes.
- Drop gtk-doc and pkgconfig(gtk-doc) BuildRequires: No longer
needed nor used. Following this, stop passing docs=gtkdoc to
meson, no longer recognized.
- Add pkgconfig(gi-docgen), pkgconfig(libcbor), pkgconfig(mm-glib),
pkgconfig(mbim-glib), pkgconfig(qmi-glib) and
pkgconfig(umockdev-1.0) BuildRequires, and conditional
pkgconfig(flashrom) BuildRequires: New dependencies.
- Update options passed to meson following upstream changes.
- Replace false for plugin_nvme and plugin_redfish with enabled,
build nvme and redfish plugins.
- Split out developer/api docs in new doc sub-package, add fdupes
BuildRequires and macros, remove duplicates.
* Thu Sep 22 2022 bjorn.lie@gmail.com
- Update to version 1.7.10 (CVE-2022-3287, boo#1203852):
+ Always check the BDP partitions when getting all the possible
ESPs
+ Correctly detect CET IBT
+ Do not show HSI events where we changed the spec result value
+ Fix aligning up addresses greater than 4GB
+ Fix applying the latest DBX update on machines with
20200729.x64 installed
+ Fix checking for invalid depth requirements
+ Fix getting the new version number of the USI docking hardware
+ Fix HSI prefix for invalid chassis
+ Never save the Redfish auto-generated password to a
user-readable file (CVE-2022-3287, boo#1203852).
+ Only create users using IPMI when we've tested the hardware
+ Only fail the kernel tainted HSI test for specific taint
reasons
+ Only show changed events in the fwupdmgr security output
+ Recognize CSME version 16 and update vulnerable versions from
CSMEVDT data
+ Write all the CCGX metadata block as intended
* Mon Aug 08 2022 dimstar@opensuse.org
- Update to version 1.7.9 (boo#1201311):
+ Do not generate a capsule header for the FMP GUID.
+ Do not use CoD even when advertized on non-aarch64 platforms.
+ Fix a critical warning when parsing an invalid PHAT record.
+ Fix a regression for devices using the Atmel FLIP Bootloader.
+ Fix parsing SMBIOS data.
+ Set the device ID on the FwupdRequest.
+ Use the correct protocol member when converting to JSON.
+ Wait for the system76-launch device to re-enumerate if unlocked
and reset.
- Changes from version 1.7.8:
+ Add the bootloader VID/PID used for the first batch of ColorHug
devices.
+ Also check for os-release in SYSCONFDIR.
+ Export the version lowest raw value correctly.
+ Fix a Wacom timeout when parsing very corrupt firmware.
+ Fix Genesys device enumeration failure by not claiming the
interface.
+ Hardcode the Redfish filedata name to firmware.bin.
+ Install D-Bus introspection data even if introspection is
disabled.
+ Only set the flashrom BIOS size if not already quirked.
+ Read the SynapticsMST firmware size in a more safe way.
+ Restart the BMC after installing BCM updates.
* Sun Apr 17 2022 gmbr3@opensuse.org
- Update to version 1.7.7:
* This release adds the following features:
+ Add CCGX trigger code to support future hardware
+ Add signed and unsigned payload metadata to more devices
+ Allow overriding the detected machine type
+ Allow quirking the flashrom flash size
+ Do not allow the DBX update for broken firmware versions
* This release fixes the following bugs:
+ Do not add the backup BMC device as it shares the same GUIDs
+ Do not hardcode the libexecdir to /usr/libexec
+ Do not leak child processes when canceling
+ Do not throw away the TPM eventlog when uploading reports to
the LVFS
+ Don't export USB4 host controllers if they do not have unique
GUIDs
+ Fix build for MacOS
+ Fix the TPM eventlog replay for Intel TXT machines
+ Fix writing large MTD images
+ Never send the DeviceChanged signal with invalid data
+ Return the correct error when there is no GPIO device to open
+ Show the update message and update image in front end tools
+ Support the new PENDING upower device states
* This release adds support for the following hardware:
+ Logitech M550, M650 and K650
+ More Elan fingerprint readers
+ More Star Labs StarLite laptops
+ More Wacom panels found on Lenovo laptops
- Split bash and fish completions to separate subpackages
- Remove un-needed BRP_PESIGN_FILES
- Set GNU_SOURCE so meson detects F_OFD_SETLK in fnctl.h support
* Fri Feb 25 2022 bjorn.lie@gmail.com
- Update to version 1.7.6:
* This release adds the following features:
+ Add a flag for UEFI devices that never want a capsule header
auto-added
+ Add a flag to indicate the device has a signed or unsigned
payload
+ Add a plugin to set a GPIO pin for the duration of an update
+ Add a simple plugin to enumerate (but not update) SCSI
hardware
+ Add two more instance IDs to the MTD devices
+ Add X-BaseboardManagementController as an update category
+ Allow assigning issues to devices for known high priority
problems
+ Parse the MTD firmware version using the defined GType
* This release fixes the following bugs:
+ Check the IFD sections have non-zero data length to fix a
critical warning
+ Modify the AT retry behavior to fix getting the firmware
branch
+ Do not run fwupd-refresh automatically in containers
+ Do not show a warning if the TPM eventlog does not exist
+ Do not show TSS2 warning messages by default
+ Fix a critical warning when loading an empty TPM eventlog
item
+ Fix a logic error when adding the community warning in
fwupdmgr
+ Fix loading flashrom devices in coreboot mode
+ Fix the error handling when updating USB4 retimers
+ Show the user when devices are not updatable due to inhibits
+ Skip probing the Dell DA300 device to avoid a warning
+ Try harder to convert to a version into a correct semver
+ Use multiple checksums when there are no provided artifacts
* This release adds support for the following hardware:
+ HP M2xfd monitors
+ Star Lite Mk III
* Tue Feb 08 2022 bjorn.lie@gmail.com
- Update to version 1.7.5:
* This release adds the following features:
+ Add a flag to indicate the firmware is not provided by the
vendor
+ Add support for showing dependency versions in JSON format
+ Allow fwupd to operate in socket mode without a D-Bus daemon
+ Allow marking a device as End-of-Life by the OEM vendor
+ Allow specifying the machine Best Known Configuration locally
+ Fall back to the ARM Device Tree 'compatible' data when
required
* This release fixes the following bugs:
+ Be more robust by retrying IPMI transactions on servers
+ Change the expired Redfish password when required
+ Fix a ModemManager segfault on startup for some MBIM-QDU
devices
+ Fix a possible dell-dock segfault at startup
+ Fix compiling with new versions of efivar
+ Fix the Nordic bootloader type detection
+ Fix USB4 retimer enumeration
+ Get the SMBIOS table and host machine ID when running on
Windows
+ Show results when calling get-details if failing requirements
+ Uninhibit the modem using ModemManager after upgrade
* This release adds support for the following hardware:
+ Future Analogix devices
+ NovaCustom NV4x
- Changes from version 1.7.4 (bsc#1193921):
* This release adds the following features:
+ Add firmware branch support for ModemManager devices
+ Allow firmware engineers to patch files at known offsets
+ Show why more devices are not marked as updatable
* This release fixes the following bugs:
+ Allow fwupdtool to be run as the non-root user in more cases
+ Assign the Logitech bulkcontroller update interface correctly
+ Do not allow UEFI updates when the laptop lid is closed
+ Do not autoload ipmi-si to avoid warning on non-server
hardware
+ Do not show a critical warning for a weird TPM event log
+ Fix waiting for USB devices when using Windows
+ Ignore non-PCI NVMe devices
* This release adds support for the following hardware:
+ HP USB-C G2 Dock
+ Many UF2 devices, experimentally
+ More PixArt devices
+ Nordic HID devices using MCUBoot
+ Quectel EG25-G LTE Modem
+ ThinkPad Thunderbolt 4 Dock
* Tue Dec 21 2021 gmbr3@opensuse.org
- Update to version 1.7.3:
* This release adds the following features:
+ Add a sync-bkc subcommand to ensure a known set of firmware
versions
+ Add FuArchiveFirmware for plugins that use archives as
firmware files
+ Add quirkable page and sector size properties to FuCfiDevice
+ Make Upower and powerd support optional
* This release fixes the following bugs:
+ Add some sanity checks to the elanfp firmware parser
+ Add the CFI JEDEC instance ID if using the vendor-extended
version
+ Check the value range when parsing the quirk keys
+ Do not wait for a USB runtime if will-disappear is set
+ Enable the MOTD integration when using pam_motd
+ Fix DFU regression when merging the FuProgress work
+ Fix running the tests when fwupd is not installed
+ Fix the GLib error message when inotify max_user_instances is
too low
+ Fix VLI VL820Q7 detection to fix flashing of the Lenovo TBT3
dock
+ Ignore a USB error for STM32 attach when the device goes away
+ Make the HSI tests optional for embedded targets
+ Make the plugin startup order deterministic
+ Set Thunderbolt ports offline on host controller
+ Use endian-safe version functions when enumerating Logitech
hardware
+ Use lowercase flag names in intel-spi to prevent a runtime
warning
+ Wait for the System76 Launch device to come back from DFU
mode
* This release adds support for the following hardware:
+ Most Nordic Semiconductor nRF Secure devices
- Fix build when not on TW: add BR protobuf-c
* Fri Dec 10 2021 hpj@urpla.net
- Fix build issue in spec
(references to libfwupdplugin2 -> libfwupdplugin5)
* Fri Nov 19 2021 bjorn.lie@gmail.com
- Update to version 1.7.2:
* This release adds the following features:
+ Add a new HSI check that PCR registers 0-7 are not empty
+ Add several compile flags to reduce the install size by over
300Kb
+ Allow overriding HwId data from the daemon.conf config file
+ Allow overriding the firmware GType from a quirk file
+ Export the component release ID over DBus
+ Remove support for the SoloKey and ChaosKey devices
+ Show a daemon warning if quirk flags are malformed
+ Speed up the daemon startup by ~40% by doing less at startup
* This release fixes the following bugs:
+ Be case insensitive when fixing the device model
+ Fix a critial warning in ccgx found by the fuzzer
+ Fix a DFU crash if the attach failed due to a hardware fault
+ Fix a Redfish crash when specifying a URL without a port
+ Fix CLI downloads when using fwupdmgr --ipfs
+ Fix critical warning when /etc/machine-id does not exist
+ Inhibit thunderbolt devices to correctly use UPDATABLE_HIDDEN
+ Set SSL_VERIFYHOST=0 when using Redfish to fix OpenBMC auth
+ Skip UEFI devices that fail coldplug
* This release adds support for the following hardware: All
exported MTD block devices
- Changes from version 1.7.1:
* This release adds the following features:
+ Allow specifying 'fwupdmgr device-test foo --json' for
unattended testing
+ Allow using a filename when using set-approved-firmware
+ Inhibit ModemManager device in mbim-qdu
+ Share the Common Flash Memory Interface quirks between
plugins
+ Show changes in HSI attributes when using 'fwupdmgr security'
+ Show the user a warning if updating may affect
full-disk-encryption
+ Show translated firmware release notes when provided
+ Support loading remotes from /var/lib/fwupd/remotes.d
* This release fixes the following bugs:
+ Fix a CCGX regression when loading firmware
+ Fix a potential crash when dumping Parade devices
+ Fix build error when sys/io.h is not available
+ Fix building the Synaptics RMI self tests on s390x
+ Fix the CSME CVE detection for new generations
+ Handle EPERM when running the self tests on systems with IPMI
+ Mark as SUPPORTED even if on battery power
+ Only save the HSI attributes to the database if different
+ Raise the client timeout value from 25 seconds to fix Redfish
startup
+ Redirect the old HSI links to the correct place
+ Relax the ITE SuperIO signature checks for new hardware
support
+ Set device time and timezone for logitech bulkcontroller
devices
+ Set the verfmt of the returned device when the daemon device
is unset
* This release adds support for the following hardware:
+ Dell Atomic Dock
+ HP Thunderbolt Dock G4
+ More PixArt devices
+ Steelseries Stratus
+ Wacom 3rd-gen Intuos BT
- Changes from version 1.7.0:
* This release adds the following features:
+ Add FuCfuPayload and FuCfuOffer for future usage
+ Add support for an 'unreachable' device flag
+ Add support for Logitech devices supporting the Unified
Battery feature
+ Allow adding GUIDs to each HSI security attribute
+ Allow installing the LVFS remote, but with it disabled by
default
+ Convert security attributes to JSON and write then to the
database
+ Convert the device test script to a fwupdmgr subcommand
+ Create Redfish user accounts automatically using IPMI
+ Use an interactive request to restart some Logitech DFU
devices
* This release fixes the following bugs:
+ Abort on invalid SREC files early to avoid a fuzzing timeout
+ Allow using interrupt transfers for HID devices
+ Allow waiting for multiple devices to replug
+ Fix a critical warning on a Unifying flash failure
+ Fix a regression in flashing the Dell dock
+ Fix Thunderbolt host controller probing
+ Forcefully set checksums found in cabinet files to lowercase
+ Force UX-capsule over full size BGRT
+ Make the SuperIO ports and timeouts specific to the DMI model
+ Only probe SynapticsMST devices that have opted-in
+ Remove support for --ignore-power as it did not work for UEFI
firmware
+ Reset the CMOS as required when changing system firmware
branch
+ Restart the daemon if any of the the plugin config files are
modified
+ Show HSiLevel=0 attributes in JSON security output
+ Update the child composite ID if the parent changes
+ Use a per-device global percentage completion
+ Write the BMP image upside down to avoid using a negative
bitmap height
* This release adds support for the following hardware:
+ A huge number of Synaptics CAPE devices
+ Elan fingerprint readers
+ Logitech Bolt peripherals, receivers and radio hardware
+ Logitech devices supporting the bulk controller protocol
+ More supported PixArt devices
+ More supported StarBook coreboot devices
+ Union Point SPI hardware
- Add pkgconfig(libprotobuf-c) and pkgconfig(protobuf)
BuildRequires: New dependencies.
- Refresh patches with quilt.
- Drop sub-package fwupdtpmevlog, no longer built.
- Update URL in _service, new home.
* Fri Nov 19 2021 bjorn.lie@gmail.com
- Update to version 1.6.4:
* Allow overriding the quirks directory at runtime
* Fix a regression in flashing the Dell dock
* Fix probing the Dell TPM
* Show HSiLevel=0 attributes in JSON security output
* Abort on invalid SREC files early to avoid a fuzzing timeout
* This release adds support for the following hardware:
+ AVer ATLAS CAM/CAM520 Pro2
+ Cayenne/Spyder Synaptics MST
+ VL819 USB devices
- Changes from version 1.6.3:
* This release adds the following features: Fall back to the
parent if the child does not have a battery level set
* This release fixes the following bugs:
+ Disable the uefi_capsule plugin if Redfish coldplug succeeded
+ Fix an elantp crash when starting the daemon
+ Fix compiling with old versions of libxmlb
+ Fix detection of 8Bitdo wireless usb adapter
+ Fix the 8bitdo N30 Pro 2 install duration
+ Fix the modem-manager report that failed to get device after
update
+ Fix writing large redfish firmware files
* This release adds support for the following hardware:
+ Poly Studio P21
+ Realtek RTD2141B
- Switch service to obs_scm, and recompress to buildtime.
- Drop automatic changesgenerate, upstream have perfectly fine and
human understandable release notes at
https://github.com/fwupd/fwupd/releases that should be copied
into .changes.
* Wed Nov 17 2021 jlee@suse.com
- Add requires to udisks2 for dbxtool update. (bnc#1192344)
* Fri Nov 05 2021 dimstar@opensuse.org
- If the machine we install onto has shim installed, it is likely
an EFI based system. Require fwupd-efi in this case
(boo#1192206).
* Fri Nov 05 2021 dimstar@opensuse.org
- Require libfwupdplugin2 by the -devel package: the -devel package
installs the .so symlink, thus we must guarantee the target
library to be present.
* Fri Oct 15 2021 jsegitz@suse.com
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_fwupd-offline-update.service.patch
* harden_fwupd-refresh.service.patch
* Thu Oct 07 2021 jlee@suse.com
- Update to version 1.6.2
- The fwupd efi program be separated to fwupd-efi package.
- Removed pesign-obs-integration, moved needssslcertforbuild
, SBAT and EFI signing stuff to fwupd-efi.
- Moved libfwupdplugin1 to libfwupdplugin2
- Change log from upstream:
https://github.com/fwupd/fwupd/blob/main/data/org.freedesktop.fwupd.metainfo.xml
- This release adds the following features:
* Add a plugin to check Lenovo firmware settings
* Add initial support for the powerd daemon
* Add support for CapsuleOnDisk
* Add support for installing UEFI updates from GRUB
* Add support for soft-requirements that can be ignored with --force
* Allow devices to only accept version upgrades
* Allow discovery of Redfish BMCs specified by VID-PID or MAC
* Allow the daemon to request interactive action from the end user
* Automatically connect the BMC network interface at startup
* Show the build timestamp if set on the device
* Show the user how to switch out of Wacom tablet Android-mode
- This release fixes the following bugs:
* Add the alternate vendor name into the 8BitDo allowlist
* Allow multiple devices to set WAIT_FOR_REPLUG
* Allow the client to watch for more property changes
* Always ensure the SuperIO version string is NUL terminated
* Automatically clear the update error as required
* Disable all UX capsules for Lenovo hardware
* Do not assume the metainfo file is NUL-terminated
* Do not save invalid files on LVFS server error
* Fix a VLI regression in enumerating the PD device
* Fix a VLI regression when installing VL820Q7 firmware
* Fix enumeration of the Synaptics Prometheus config child
* Fix parsing Redfish USB/PCI network VID/PIDs
* Fix the fwupdmgr progressbar spinner to actually work
* Fix version number for legacy Wacom Bluetooth modules
* Ignore virtual M.2 ATA devices
* Preserve NEEDS_REBOOT on successful update
* Prevent a corrupt PHAT table from allocating lots of memory
* Read the Redfish SMBIOS table when required
* Remove the vendor string from the device name where required
* Save the update state to the database correctly all of the time
* Switch from sysctl to ioctl for ESRT on FreeBSD
* Try reading from /sys/class/dmi if SMBIOS direct access fails
* Watch for children added or removed after setup has been completed
* Work around a XCC-ism on Lenovo hardware
- This release adds support for the following hardware:
* ModemManager devices supporting Firehose or MBIM QDU
* More models of RTS54HUB
* More Poly DFU devices
* Parade LSPCON
* PixArt receiver and wireless hardware
* Realtek MST with RTD2142
* SuperIO IT5570
* USB4 Dell dock
* Thu Apr 01 2021 glin@suse.com
- Remove valgrind from BuildRequires since it's not a hard
requirement anymore. (bsc#1184248)
* Tue Mar 30 2021 glin@suse.com
- Update to version 1.5.8:
New features:
* Add a new internal flag to opt-in to GUID matching
* Add D501 Baklava device support
* Add fu_device_set_battery_level()
* Add missing uint64 read and write helpers
* Add Qubes wrapper source and create packages
* Allow enabling plugins only matching a specific HwId
* Prompt for unlock keypress if reset command is blocked
* Remove obsolete dell-dock non-passive update flow support
* Remove the Hughski public key
* Show a warning when parsing invalid quirk files
* Support for GATT characteristic signals/notifications
* Support more than one protocol for a given device
Fixes:
* Align the CCGX DMC firmware to 64 byte chunks
* Be more strict for custom quirk keys
* Check pixart firmware compatibility with hardware before
flashing
* Correct a thunderbolt assertion if kernel failed FW read
* Correctly erase STM32 devices when transfer size is less
than sector size
* Detect SREC overflow to avoid adding ~4GB of 0xFF padding
* Do not show a critical error when flashing footer-less
binary files
* Don't allow device updates while needing activation
* Fix a regression in the elantp defined IAP start address
* Fix a regression where activate stopped working
* Fix firmware update of pointing device on Lenovo ThinkPad
Nano
* Fix the HSI plugin 'Disabled' state
* Fix the quirk key name for the Lenovo HDMI with power
* Fix writing to the GD32VF103 bootloader
* Only call elantp->detach() when writing a firmware blob
* Updated StarLabs GUIDs
* Wait a few ms for the Logitech hardware to settle after
detach
- Remove GPG-KEY-Hughski-Limited from the filelist
- Drop upstreamed patch
+ fwupd-bsc1182057-fix-sbat-section-copy.patch
* Fri Mar 12 2021 glin@suse.com
- Add fwupd-bsc1182057-fix-sbat-section-copy.patch to set the
proper section flags for .sbat section so that objcopy can
copy it into fwupd*.efi (bsc#1182057)
* Wed Feb 24 2021 glin@suse.com
- Update to version 1.5.7:
New features:
* Add initial support for Bluez bluetooth devices
* Add more supported pixart devices
* Add support for the RTD21xx HDMI converter
Fixes
* Convert MBR types to GPT GUIDs to help find the ESP
* Do not allow updating a synaptics-mst device with no customer ID
* Drop unused heap pages after startup has completed
* Ensure SBAT metadata is added correctly
* Move the plugin build logic to the plugins themselves
* Only allow verify-update for plugins that support CAN_VERIFY
- Specify SBAT metadata for openSUSE/SLE (bsc#1182057)
- Adjust the meson options
+ plugin_uefi => plugin_uefi_capsule and plugin_uefi_pk
+ plugin_synaptics => plugin_synaptics_mst and plugin_synaptics_rmi
+ Disable Intel AMT plugin in non-x86 systems
* Thu Feb 18 2021 info@paolostivanin.com
- Update to 1.5.6:
New features:
* Add SBAT metadata to the fwupd EFI binary
* Add support for GD32VF103 as found in the Longan Nano
* Add support for RMI PS2 devices
* Add support for the System76 Keyboard
* Allow downloading firmware from IPFS
* Install the UX data into a single .tar.xz file
* Add a plugin to update PixArt RF devices
* Add new hardware to use the elantp and rts54hid plugins
* Allow specifying more than one VendorID for a device
* Detect the AMD TSME encryption state for HSI-4
* Detect the AMI PK test key is not installed for HSI-1
* Add Maple Ridge Thunderbolt firmware parsing support
* Add --no-remote-check to ignore checking for download remotes
* Allow creating FMAP and Synaptics firmware using builder.xml
Fixes:
* Add support for the Starlabs LabTop L4
* Allow using an external ESP again
* Ask the user to reboot when required if downgrading
* Be more paranoid when parsing ASCII buffers and devices
* Check if the fwupd BootXXXX entry exists on failure
* Clear the pending flag if restarting the system
* Do not allow flashing using flashrom if BLE is enabled
* Do not allow Lenovo hardware to install multiple capsules
* Do not parse the OptionROM image
* Do not show Unknown [***] for every client connection
* Fix dnload wBlockNum wraparound for ST devices
* Fix OOM when using large ArchiveSizeMax values
* Fix several crashes spotted by AddressSanitizer
* Fix several places where the Goodix MOC plugin could crash
* Include the PCR0 to the report metadata
* Report the lockdown status from UEFI and SuperIO plugins
* Show a console warning if the system clock is not set
* Fix flashing a fingerprint reader that is in use
* Fix several critical warnings when parsing invalid firmware
* Fix updating DFU devices that use DNLOAD_BUSY
* Ignore the legacy UEFI OVMF dummy GUID
* Make libfwupd more thread safe to fix a crash in gnome-software
* Never show unprintable chars from invalid firmware in the logs
* Allow using fwupdtool as non-root for firmware commands
* Do not trust the Block.HintSystem boolean for ESP filtering
* Fix a memory leak when parsing Synaptics firmware
* Fix a possible crash when reading the Goodix MOC USB request
* Fix crashes when parsing invalid FMAP, DMC, Solokey and Synaptics images
- Deprecate fwupd-bsc1179790-disable-hintsystem.patch
* Mon Dec 14 2020 glin@suse.com
- Add fwupd-bsc1179790-disable-hintsystem.patch to remove
Block.HintSystem from ESP filtering (bsc#1179790)
* Wed Dec 09 2020 glin@suse.com
- Update to version 1.5.3:
+ Lower the CURL version required to fix build in RHEL
+ Do not use meson ternary operations to avoid bumping the
required meson version
+ Added Lite Mk III
+ Allow setting the GMainContext when used for sync methods
+ Fall back to the misc device for serio devices
+ Actually implement rescan in FuUdevDevice
+ bcm57xx: Refactor CRC code to remove extra byteswap
+ bcm57xx: Fix CRC check
+ synaptics-rmi: Don't crash if calling ->to_string() before
- >setup()
+ Fix a possible critical warning due to missing retval
+ Add the serio->firmare_id for UDev devices
+ Export the driver name from FuUdevDevice
+ Allow the client to send PKCS7 and GPG signatures
+ Force the remote kind to JCat server-side
+ Only parse the signature if the remote is JCat
+ fu-main: Fix sender_features insert with wrong size
+ make platform integrity plugin optional and disabled by default
+ Add quirk for Western Digital
+ Mark more user-visible strings as translatable
+ modem-manager: validate firmware update method combinations
+ modem-manager: remove unused byte counts in QMI/PDC update logic
+ modem-manager: make sure the correct interface number is used
for QMI
+ modem-manager: udev monitoring only if device switches layout
+ modem-manager: plug udev client leak
+ Restrict loading component types of firmware
- Enable supported_build to clarify that this package is supported
(bsc#1179790)
- Drop fwupd-platform-integrity.conf since upstream disables the
platform integrity module by default now due to incompleteness.
- Address fwupd-refresh.service in %preun, %pre, %post, and %postun
and provide a rc link for it
- Version "Obsoletes: dbxtool" and "Obsoletes: fwupdate"
* Fri Dec 04 2020 glin@suse.com
- Update to version 1.5.2:
+ ata: Add OUI quirk for Toshiba
+ libfwupd: Restore recognizing gpg and pkcs7 types still
+ Register the SoupSession gtype when required
+ Switch from libsoup to libcurl
+ Fix sync method when called from threads without a context
+ Move ABI check to Github actions
+ Enable github workflows
+ libfwupd: Add fwupd_client_download_file()
+ libfwupd: Add fwupd_client_get_user_agent()
+ Only download the remote metadata as required
+ Add breaks for fwupdate 12-7 (Closes: #960688)
+ Install modules-load configs in the correct directory
+ vli: Do not be clever replugging the MSP430 device
+ vli: Make some trivial debugging more specific to help debug
an issue
+ make gcab optional
+ Fall back to FAT32 internal partitions for detecting ESP
+ Add a flag to indicate if packages are supported
+ uefi: a new option for uefi configuration to use UEFI removable
path
+ Add a section to man page on scripting
+ synaptics-mst: Improve reliability by waiting 2 seconds after
writing data
+ hailuck: Add an plugin for the Pinebook Pro laptop
+ Allow setting global flags for FuHidDevice
+ Set the SMBIOS chassis type to portable if a DT battery exists
+ colorhug: Don't set the version format to triplet at startup
+ Allow components to set the icon from the metadata
+ colorhug: Fix detection of version on older firmware versions
+ bcm57xx: Fix reading vendor/device ids from firmware.
+ Remove HSI update and attestation suffixes
+ trivial: make dbxtool executable to fix snap build
+ Ignore an invalid vendor-id when adding releases for display
+ Notify the service manager when idle-quitting
- Refresh fwupd-bsc1130056-change-shim-path.patch
- Changes in BuildRequires:
+ Replace pkgconfig(libsoup-2.4) with pkgconfig(libcurl)
+ Replace pkgconfig(systemd) with pkgconfig(libsystemd)
- fwupd-msr.conf and fwupd-platform-integrity.conf are moved to
%{_modulesloaddir}.
* Mon Nov 16 2020 glin@suse.com
- Obsoletes and Provides dbxtool since fwupd 1.5.0+ now embeds
dbxtool in the dbxtool plugin
* Tue Nov 03 2020 glin@suse.com
- Amend the spec file (jsc#SLE-16818)
+ Only enable fish support for Tumbleweed
+ Only enable the MSR plugin for x86
+ Only install dbxtool in the architectures with UEFI support
* Mon Nov 02 2020 dimstar@opensuse.org
- Update to version 1.5.1:
+ Use UDisks to find out if swap devices are encrypted.
+ Show a link to discover more information about a specific
plugin failure.
+ updated fish completions to 1.5.0.
+ Remove the duplicate parent-child data in FwupdDevice and
FuDevice.
+ Show a less scary fwupdate output for devices without info.
+ thunderbolt: recognize authorized value of '2' as well.
+ bcm57xx: Make hotplug more reliable.
+ Use a different Device ID for the OptionROM devices.
+ contrib/ci: switch TPM simulator from ibmswtpm to swtpm.
+ Delete unused EFI variables when deploying firmware.
+ Fix probe warning for the Logitech Unifying device.
+ Include the amount of NVRAM size in use in the LVFS failure
report.
+ Add external interface messages.
* Mon Oct 26 2020 dimstar@opensuse.org
- Update to version 1.5.0:
+ Add a compatible re-implementation of the rhboot dbxtool.
+ Add async versions of the library for GUI tools.
+ Add commands for interacting with the ESP to fwupdtool.
+ Add firmware-extract subcommand to fwupdtool.
+ Add FwupdPlugin so we can convey enumerated system errors to
the end user.
+ Add plugin for Goodix fingerprint sensors.
+ Add plugin that can update the BCM5719 network adapter.
+ Add plugin to update Elan Touchpads using HID.
+ Add support for a delayed activation flow for Thunderbolt.
+ Add support for ChromeOS Quiche and Gingerbread.
+ Add support for Hyper hardware.
+ Add support for the Host Security ID.
+ Add support for ThunderBolt retimers.
+ Add switch-branch command to fwupdtool and fwupdmgr.
+ Allow blocking specific firmware releases by checksum.
+ Allow contructing a firmware with multiple images.
+ Allow firmware to require specific features from front-end
clients.
+ Allow updating the dbx using the LVFS, validating it is safe to
apply.
+ Include the HSI results and attributes in the uploaded report.
+ Support loading DMI data from DT systems.
+ Support LVFS::UpdateImage for GUI clients.
* Wed Sep 02 2020 qkzhu@suse.com
- Add fwupd-jscSLE-11766-close-efidir-leap-gap.patch: Set SLE and
openSUSE esp os dir at runtime (jsc#SLE-11766)
- Drop _multibuild and build option -Defi_os_dir="%{efidir}": with
the above patch fwupd can detect esp os dir dynamically
- Update the efidir related %post and %postun scripts in spec file
* Thu Jul 30 2020 dimstar@opensuse.org
- Update to version 1.4.5:
* Add XB_QUERY_FLAG_FORCE_NODE_CACHE
* Add support for a delayed activation flow for Thunderbolt
* Allow firmware to require specific features from front-end clients
* Allow multi-byte FuUdevDevice preads and writes
* Be more defensive when remotes are missing required keys
* Disable the SQLite lookaside cache
* ccgx: Add more hybrid dock support
* ccgx: Modify readme to remove customer info
* ccgx: add new protocol for dmc dock
* ccgx: remove verify flag in plugin
* modem-manager: read the vendor ID directly from sysfs attribute Fixes: #2209
* thelio-io: Add the DFU instance ID as a counterpart only
* thunderbolt: Add a new subclassed thunderbolt firmware update type
* thunderbolt: Allow quirks to skip the authentication step
* thunderbolt: drop support for force power
* tpm-eventlog: fix PCR0 calculation
* uefi: check for free space after cleaning up ESP
* vli: Add dual-image feature for VL103 backup firmware
* vli: Add the project ID shared SPI PD controllers
* vli: Allow chained usb hub devices where the parent needs GPIOB reset
* vli: Do not modify the class vfuncs depending on device type
* vli: Do not use GUID matching for the MSP device
* vli: Rename FuVliUsbhubI2cDevice to FuVliUsbhubMsp430Device
* vli: Set FuQuirks on the shared SPI object
* vli: Set the i2c instance IDs in probe()
* vli: Use the GPIOB reset for the MiniDock VL103
* vli: Wait for the root device to be replugged when updating the MSP430
* Thu Jul 30 2020 dimstar@opensuse.org
- Update to version 1.4.4:
* Release fwupd 1.4.4
* Fix regression when checking for downgraded metadata
* Thu Jul 30 2020 dimstar@opensuse.org
- Update to version 1.4.3:
* Release fwupd 1.4.3
* ata: A OUI quirk for Kingston
* ccgx: Fix a potential division by zero
* Check the device requirements when returning from GetDetails
* fu-engine: Allow --plugin-whitelist to use dashes instead of
underscores
* Always enforce the metadata signature has a valid timestamp
* ccgx: modify install duration for dmc device
* ccgx: Add support for HP DMC dock devices
* dell-dock: prevent updates to occur via synaptics-mst plugin
* dell-dock: Capture the dock SKU in metadata
* synaptics-prometheus: Force the minor version from 0x02 to 0x01
to make sure the devices can be updated back to 0x01.
* Generate a body for github releases (Fixes: #2034)
* Fri Jul 24 2020 yfjiang@suse.com
- Build the package separately for openSUSE and SLE using
_multibuild (jsc#SLE-11744).
* Wed Jun 03 2020 dimstar@opensuse.org
- Update to version 1.4.2:
* vli: Add no-guid-matching for all VLI devices
* vli: Remove a copy-and-paste mistake
* Add two OUI quirks
* ata: Add WD OUI quirk 000cca
* synaptics-rmi: Essentially blacklist Dell K12A
* dfu: Avoid communicating when bitManifestationTolerant is off
* ata: Add OUI quirk for Western Digital
* dfu: Support MATEKF722SE quirk
* Fix various build issues with -Wdiscarded-qualifiers
* thunderbolt/dell-dock: Delay activation for Thunderbolt updates
* Switch the default of EnumerateAllDevices to false
* Add OUI quirk for SanDisk
* vli: Add two standard USB instance IDs for shared-PD devices
* vli: Use GPIOB to reset the VL817 found in two Lenovo products
* tpm-eventlog: Correct the display of final calculated PCRs
* wacom-raw: fixup switching to bootloader mode
* Wed Jun 03 2020 dimstar@opensuse.org
- Update to version 1.4.1:
* thunderbolt: Don't show safe mode errors for USB4 host controllers
* ep963x: Various changes to make the plugin actually work on real hardware
* Make tss2-esys conditional
* ep963x: Remove some dead code spotted by Coverity
* ccgx: Only update the FW2 partition of the ThinkPad USB-C Dock Gen2
* ccgx: Expand the FWImageType for future hardware
* Allow specifying the device on the command line by GUID
* Fix the DeviceID set by GetDetails
* wacom-usb: Fix a theoretical buffer over-read to make GCC happy
* vli: Only show the i2c devices on the USB3 hub
* Allow devices to be updatable, but only when upgrading a proxy device
* Reset the progressbar time estimate if the percentage is invalid
* ccgx: Always report 100% when finished writing
* Add a device quirk that forces an explicit device-id match
* ccgx: Set the device name and summary from quirk files
* vli: Only do the APP5 FW bug fix on affected hardware
* vli: Show all the buffer when debugging with FWUPD_VLI_USBHUB_VERBOSE
* fu-engine: Refresh device name and format before setting supported flag
* Allow a device to set the logical or physical ID during ->setup()
* ccgx: Split out a trivial helper to set the instance IDs
* ccgx: Set the device name to be more useful
* ccgx: Set the logical ID as the FwMode
* ccgx: Split out a trivial function to set the version
* ccgx: Do not reboot the device write after installing
* ccgx: Do no show the flash parameters when unknown
* Allow devices to match the proxy device by GUID
* Do not skip attach() if the device is marked _WILL_DISAPPEAR
* dell-dock: Port to using fu_device_get_proxy()
* Allow adding a device 'proxy' device that can do actions on it
* vli: Do not show the USB 2 recovery devices for USB 3 hubs
* vli: Add metadata to identify which is the same physical device
* uefi: correctly format firmware version of Dynabook (né Toshiba) X30, X40 and probably others
* synaptics-cxaudio: Use the ->attach() device vfunc
* synaptics-cxaudio: Wait for the device to reboot after writing firmware
* logitech_hidpp: decrease verbosity of messages that hid++ ID is missing
* Prefer to update the child first if the order is unspecified
* Do not modify the device priority for child devices
* Wed Apr 22 2020 glin@suse.com
- Exclude fwupdate from the architectures without UEFI support.
* Wed Apr 15 2020 glin@suse.com
- Update to version 1.4.0:
* Release fwupd 1.4.0
* Allow removing device flags from quirk files
* Use black to format python source in a consistent manner
* Define SOURCE_VERSION when building a package
* Only set the parent when adopting children
* Do not conditionalize attach() and detach() on IS_BOOTLOADER
* Do not crash the daemon if a plugin does something dumb
* wacom-usb: Add more sanity checks in case the daemon goes crazy
* wacom-usb: Use a per-device cleanup function
* Add some more device regression tests
* wacom-usb: Add a lot of missing metadata about the devices
* wacom-usb: Hide a lot of debugging behind FWUPD_WACOM_VERBOSE
* Only auto-add counterpart GUIDs when required
* ccgx: remove update message
* ccgx: add parent guid for hybrid dock
* ccgx: Use a smaller timeout for i2c read and write operations
* ccgx: Retry the register read and write with a i2c reset
* ccgx: Fix buffer overflow when reading out i2c status
* ccgx: Retry the HID disconnect up to 5 times
* ccgx: Show a better error message on failure
* ccgx: Allow forcing firmware of the wrong app_type with fwupdtool
* Modularize the hardware tests
* Ignore indirect devices that replug during the composite firmware update
* Export the device state as part of the D-Bus interface
* Fix devices that use CounterpartGuid when more than one device is installed
* Use the GUID as a fallback rather than the connection ID
* ccgx: Fix critical warning on i2c write failure
* logitech-hidpp: Do not add peripheral devices for receiver in BL mode
* Install the installed-tests only if tests are enabled
* Load the signature to get the aliased CDN-safe version of the metadata
* vli: Only reboot the USB hub once
* synaptics-cxaudio: Only use the PATCH2 address when the patch level is 2
* add STM32F745 stm dfuse quirk
* dfu: Add a way to set the timeout from a quirk
* Export the release urgency
* Export the release creation time
* Check the firmware requirements before adding SUPPORTED
* data/motd/fwupd-refresh: Only order after network.target
* ccgx: Do not add the HID device that will disconnect
* ccgx: Use Silicon ID and Application type to set flash parameters
* Add a new daemon configuration option to control EnumerateAllDevices
* logitech_hidpp: set the bootloader protocol
* Install meson from pip for LGTM
* bash: add completion for fwupdtool reinstall
* fu-tool: add reinstall command
* fu-engine: export fu_engine_get_releases_for_device in header
* vli: Wait for the VL103 to timeout to fix detach
* ccgx: Show the UpdateMessage in the correct device mode
* ccgx: Add extra instance IDs to match specific firmware
* Use a static version number
* thunderbolt: Rather than hardcoding to PCI slot numbers, use domain in GUID
* Revert "thunderbolt: Create a unique GUID including Thunderbolt controller path"
* dell-dock: Port to fu_device_retry()
* nitrokey: Convert to use FuHidDevice
* nitrokey: Port to fu_device_retry()
* vli: Port to fu_device_retry()
* Add fu_device_retry() helper functionality
* ccgx: Implement writing firmware to flash
* ccgx: Add i2c status check when reading or writing registers
* ccgx: Add 5ms delay between read registers to avoid an i2c error
* libfwupdplugin: Use fu_device_locker_close()
* synaptics-mst: Use fu_device_locker_close()
* Add fu_device_locker_close()
* ccgx: Do not store the silicon ID in the image address
* ccgx: Add device quirks for the Lenovo Hybrid Dock
* ccgx: Switch HID mode to HPI mode at startup
* ccgx: Clear the event queue when in startup
* ccgx: Wait for hardware to settle when coming out of reset
* ccgx: Do not mark the device as updatable when in boot mode
* ccgx: Verify the firmware app type when preparing firmware
* ccgx: Set the update message when running in backup firmware
* ccgx: Read the FwAppType from the hardware
* ccgx: Set the HPI version number for the current firmware
* ccgx: Get the silicon ID to map the flash parameters
* ccgx: Read the HPI device mode at startup
* ccgx: Set up the HPI I²C config at startup
* ccgx: Create devices when in HID and I2C modes
* Add a new ChromeOS CI target to build without GPG and PKCS7
* Use Jcat files in firmware archives and for metadata
- Removed fu-keyring-gpg which caused CVE-2020-10759 (boo#1172643)
* csr: Allow truncated HID reads
* vli: Only consider the high nibble when building the sub-version
* csr: Parse the firmware as a DFU file
* Add support for EP963x hardware
* Add FuHidDevice abstraction
* vli: Correctly attach VL103 after a firmware update
* ccgx: Parse the metadata block in the firmware image
* ccgx: Add a firmare parser for cyacd files
* logitech: Correctly set the protocol
* Add the optional device-id to the update --help output
* Fix a difficult-to-trigger daemon hang when replugging devices
* vli: Remove a dock device from the whitelist that is never going to be updated
* vli: Add some trivial debugging to help track down a bug
* vli: Never add USB hub devices that are not upgradable
* uefi: Don't use shim for non-secure boot configurations
* Start fwupd-activate.service after snapd.service
* dfu: Actually reload the DFU device after upgrade has completed
* dfu: Add one more m-stack device requiring a quirk
* Apply version format to releases and devices at same time
* Ensure that the DeviceID is set for child devices
* Fix a daemon crash when removing children
* Allow waiting for the parent device when replugging
* Add fu_device_get_root() shared API
* vli: Fix an error when detaching MSP430
* vli: Fix a critical warning when getting the USB speed
* vli: Fix the error enum values for the MSP430
* Do not add blank lines when tokenizing Intel hex files
* vli: Fix the version calculation for MSP430
* vli: Ignore one more error when attaching
* vli: Always expect the VL103 header at 0x1003 or 0x4000
* vli: Do not fall back to the recovery write for usbhubs
* vli: Only show the 2nd header if the device ID is valid
* vli: Fix VL103 reboot from ROM mode to FW mode
* vli: Add some better comments for writing GPIOs
* Add a helper script to add a DFU header
* Add 'firmware-convert' subcommand to fwupdtool
* fu-engine: Make two passes of requirements checking
* fu-engine: Copy the VersionFormat from the CAB if specified in `get-details`
* Add a new plugin for CPU microcode
* Don't build/install fwupdagent man page if agent build is not requested
* Introduce a new VersionFormat for `hex`
* Drop UEFI quirks we now inherit from metadata
* ci: build Debian using libflashrom
* When TPM PCR0 measurements fail, query if secure boot is available and enabled
* fix fwupd.shutdown.in according to the movement of fwupdtool to bindir
* ata: Add OUI quirk for Western Digital and Intel
* improved fish shell completion
* vli: Set the MSP430 version format to pair
* Always return AppStream markup for remote agreements
* ata: Add trivial OUI quirk for Micron
* added completion script for fish shell
* Do not fail loading in /etc/machine-id is not available
* Use xb_builder_source_add_simple_adapter
* Create FuCabinet and untangle a lot of legacy code
* nvme: Do not try to handle integer version numbers
* Allow server metadata to set the version format on some devices
* fu-tool: Correctly append the release to devices in `get-details`
* For the `get-details` command make sure to always show devices
* fu-engine: Copy the version and format from donor device in get-details
* fu-engine: Use unknown for version format by default on get-details
* Inihbit all power management actions using logind when updating
* Decouple the version format from the version itself
* Add raw versions for bootloader and lowest
* Allow server metadata to set the device name on some devices
* Remove support for GCab less than v1.0
* fu-device-list: Check protocol before de-duping devices
* Do not allow devices that have no vendor ID to be UPDATABLE
* ata: Include a vendor ID for ATA hardware
* ata: Switch off the verbose logging by default
* Always check for PLAIN when doing vercmp() operations
* Discard the reason upgrades aren't available (Fixes: #1678)
* Improve the description of `fwupdtpmevlog` for man page
* Move `fwupdtpmevlog` into `bindir`
* uefi: Move `fwupdate` into `bindir`
* Move `fwupdtool` and `fwupdagent` into `bindir`
* Use the system provided flashrom on Fedora
* Add a plugin vfunc to run after subclassed FuDevice creation
* ci: use standalone script to generate build dependencies
* Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd
* Use the recently released flashrom v1.2
* Generate an additional UEFI quirk file using the stable LVFS metadata
* uefi: Apply capsule update even with single valid capsule
* Fix a critical warning when installing some firmware
* ebitdo: Fix the endpoint address logged in the error message
* uefi: Find the correct lds and crt name when specifying -Defi_ldsdir
* upower: Move battery threshold declaration into a configuration file
* upower: Decrease minimum battery requirement to 10%
- Refresh fwupd-bsc1130056-change-shim-path.patch
- Add new dependency: jcat
* Wed Mar 11 2020 hpj@urpla.net
- Update to version 1.3.9:
* Release fwupd 1.3.9
* Always check for PLAIN when doing vercmp() operations
* improved fish shell completion
* vli: Set the MSP430 version format to pair
* added completion script for fish shell
* Always return AppStream markup for remote agreements
* Do not fail loading in /etc/machine-id is not available
* fu-engine: Fixup broken-ness from 0c0fada18fc9cb2a0efec351db67f0867bf045cd
* Use xb_builder_source_add_simple_adapter
* fu-tool: Correctly append the release to devices in `get-details`
* For the `get-details` command make sure to always show devices
* fu-engine: Copy the version and format from donor device in get-details
* fu-engine: Use unknown for version format by default on get-details
* Inihbit all power management actions using logind when updating
* fu-device-list: Check protocol before de-duping devices
* ata: Switch off the verbose logging by default
* Discard the reason upgrades aren't available (Fixes: #1678)
* Improve the description of `fwupdtpmevlog` for man page
* Move `fwupdtpmevlog` into `bindir`
* uefi: Move `fwupdate` into `bindir`
* Move `fwupdtool` and `fwupdagent` into `bindir`
* ci: use standalone script to generate build dependencies
* Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd
* Use the recently released flashrom v1.2
* uefi: Apply capsule update even with single valid capsule
* Fix a critical warning when installing some firmware
* ebitdo: Fix the endpoint address logged in the error message
* fu-util: fix a logic error in report uploading introduced in e076d48afb74d1447936d353f12781755f13b047
* uefi: Find the correct lds and crt name when specifying -Defi_ldsdir
* upower: Move battery threshold declaration into a configuration file
* upower: Decrease minimum battery requirement to 10%
- Update to version 1.3.8:
* Release fwupd 1.3.8
* Do not use fu_common_vercmp() when the device verfmt is PLAIN
* altos: Output raw buffer data when using FWUPD_ALTOS_VERBOSE
* altos: Prefix an error to provide more context
* altos: Add a trivial _to_string() implementation
* synaptics-cxaudio: Make the verfmt match that of the existing Windows tools
* synaptics-mst: Allow MST to fall back if no PCI device is marked as parent
* Allow specifying a list of subsystems when setting a physical ID
* synaptics-mst: Fix trivial thinko caused by the wrong dock connected
* vli: Invert the logic to reboot the parent FuCliUsbhubDevice, not the child
* vli: Switch around the hub tier values
* uefi: Fix a build regression with Fedora 30
* logitech_hidpp: Ignore detach failures (Fixes: #1183)
* logitech_hidpp: When detaching to bootloader use non-blocking IO and wait for timeout
* vli: Show erase progress when doing a v2 recovery
* uefi: Do not remove the 'Linux Firmware Updater' boot entry before update
* uefi: Do not rewrite BootOrder in the EFI helper
* vli: Add support for the PS186 device
* Set up more parent devices for various Lenovo USB hubs
* cxaudio: Set the update protocol to prevent a daemon warning
* vli: Add support for Lenovo Modularized dock
* Add an extra instance ID to disambiguate USB hubs
* vli: Remove the unused tierX custom flags for each device
* Revert "Correctly delete UEFI variables"
* uefi: make debugging output more readable
* vli: Fix a potential buffer-overflow when parsing firmware
* tpm: Optimize the string parsing and fix the boolean logic
* synaptics-rmi: Add a missing error enum value
* synaptics-rmi: Correctly identify a checksum failure
* synaptics-rmi: Fix Coverity issue that is impossible to hit in reality
* solokeys: Parse old versions of the bootloader string
* Add a plugin to update PD controllers by Fresco Logic
* vli: Set the device progress correctly when erasing a PD device
* vli: Use the correct command to get the device firmware version
* vli: Correctly reset all VL100 devices
* vli: Set all standalone PD devices to not do SPI auto-detection
* vli: Mark standalone PD devices as updatable
* vli: Set the protocol for FuVliUsbhubPdDevice types
* Support the new gnuefi file locations
* Cleanup ancient fwupdate-* EFI variables too (Fixes: #1739)
* Detect kernel lockdown status
* vli: Add the DEV instance ID to all devices
* tpm-eventlog: Replay the TPM event log to get the PCRx values
* tpm-eventlog: Store the eventlog hashes in binary form
- Update to version 1.3.7:
* Release fwupd 1.3.7
* Correctly delete UEFI variables
* ci: allow working with podman w/o aliases
* ci: fedora: force correct rpm package version
* src: fu-engine: check version was updated by checking version
* Correctly import PKCS-7 remote metadata
* Add 'refresh' to fwupdtool
* Add 'get-remotes' to fwupdtool
* Generate a win32 setup binary
* Fix display of UTF-8 characters on Windows
* Move MOTD population into the daemon
* fu-util: Discourage metadata refreshes more than once per day
* Disable the battery percentage checks if UPower is unavailable
* Allow getting the list of updates in JSON format from fwupdagent
* Revert "trivial: Attempt to fix Debian CI"
* fu-remote-list: emit a changed signal when modifying a remote
* synaptics-mst: Skip self tests for systems with amdgpu
* Allow applying all releases to get to a target version
* Split up fu_engine_install() into two halves
* logitech_hidpp: use the correct timeout for IO channel writes
* Allow quirking devices that always require a version check
* Shut down automatically when there is system memory pressure
* Show the device parent if there is an interesting child
* Allow the client to get the list of FwupdDevice children
* Set the FwupdDevice parents in fwupdtool
* Don't always get the vendor ID for udev devices using the parent
* Add a runtime warning when adding a device without an vendor-id or protocol set
* vli: Set more of the firmware max sizes automatically
* vli: Add a SpiAutoDetect quirk for some of the PD devices
* vli: Use a different protocol ID for i2c devices
* vli: Add support for standalone Single PD devices
* vli: Move generic SPI functionality into the FuVliDevice base class
* vli: Remove the PD emulation code
* vli: Use a more standard GUID for the child i²c and shared SPI devices
* vli: Allow setting the device kind from a quirk
* vli: Make more function names match the docs
* vli: Move the SPI command quirking from FuVliUsbhubDevice down to FuVliDevice
* vli: Rename FuVliUsbhubPdFirmware to FuVliPdFirmware
* vli: Allow the device to specify the PD firmware header offset
* vli: Add a FuVliDevice as a subclass to FuVliUsbhubDevice
* vli: Define the device GType in the quirk file
* vli: Move the CRC calculations out of usbhub scope
* vli: Have one 'DeviceKind' for all objects
* vli: Rename the `vli_usbhub` plugin to `vli`
* Capitalize GNOME
- package has grown a few new binaries: fwupdagent, fwupdate, fwupdtool
and a tpm event debugging tool, that is packaged separately:
fwupdtpmevlog
* Thu Jan 23 2020 stefan.bruens@rwth-aachen.de
- Drop docbook-utils-minimal build dependency, manpages are generated
with gtk-doc.
* Thu Jan 02 2020 bjorn.lie@gmail.com
- Update to version 1.3.6:
* plugins/coreboot: Add missing fu_hash dependency
* trivial: synaptics-cxaudio: Add Google type C <-> 3.5mm adapter
* fu-engine: don't expose bootloader version errors to users
* trivial: dell-dock: drop unused quirk keyx
* trivial: rename synapticsmst to synaptics-mst
* trivial: actually set vendor ID for synaptics
* fu-remote-list: Drop fallback path behavior
* libfwupdplugin: Make sure systemd created environment variables exist
* trivial: fu-remotes-list: drop usage of `FU_SELF_TEST_REMOTES_DIR`
* trivial: synaptics-rmi: hardcode Vendor string
* trivial: Set vendor ID for Dell WD19 to USB:0x413C (Fixes: #1653)
* trivial: Document the use of vendor-id in each plugin
* superio: Use the baseboard vendor as the vendor ID
* uefi: Use the BIOS vendor as the vendor ID
* coreboot: Use the BIOS vendor as the vendor ID
* flashrom: Use the BIOS vendor as the vendor ID
* dell: Hardcode a plausible vendor ID
* emmc: Set the correct vendor ID prefix
* fu-util-common: correct the default prompt for reboot/shutdown (Fixes: #1617)
* Split out the remote loading from FuConfig
* vli-usbhub: Fix the quirk for the legacy VIA 813 chip
* Clarify error messages when no upgrades available
* trivial: Don't handle a vendor-id requirement error that cannot happen
* Only check the vendor ID if the device has one set
* fu-install-task: Enforce that device protocol matches metadata
* Add a new plugin that can parse the TPM event log
* Allow other plugins to contribute report metadata
* trivial: dell: hardcode the physical device ID for tpm to match the tpm plugin
* Add a new plugin that exposes the system TPM device firmware version
* Add fu_udev_device_set_flags()
* trivial: Render large values of VersionRaw in a more portable way
* trivial: wacom-raw: mark all Moffett SKUs as self recovery
* Throw exit status 0 (instead of 2) if there is no firmware to be updated
* Add a `dell-bios` version format
* Add support for multiple LVFS::VersionFormat tags
* Do not do semver conversion in fu_common_vercmp()
* trivial: Deprecate fu_common_version_parse()
* trivial: Support 'plain' in fu_common_version_from_uintXX()
* Add the sysfs 'description' as the one-line device summary
* trivial: Also print the parent keys when using FU_UDEV_DEVICE_DEBUG
* trivial: Add fu_common_version_from_uint64()
* trivial: Convert the VersionRaw value to a uint64_t for future use
* Allow building on Windows with MinGW
* synaptics-prometheus: Allow incremental version major and minor number
* Replace 'scheduing' with 'scheduling'
* Export the raw device version to the client --verbose output
* trivial: Only dlopen the test plugin once
* Export the device protocol to the client --verbose output
* trivial: installed-tests: try to display journal for failed tests
* trivial: ci: debian: enable verbose daemon logging for failure analysis
* trivial: installed-tests: explicitly choose webcam device ID
* trivial: debian: remove obj-* built files to fix back to back builds
* trivial: ci: don't let bad symlinks cause debian build failures
* trivial: debian: correct a dependency for libfwupdplugin-dev
- Changes from version 1.3.5:
* plugins: Fix potential use of NULL pointer in fu_dell_dock_mst_write_register
* Fix shifting integer by more than 31 in fu_util_filter_device
* synaptics-prometheus: Reload the device version after IOTA update
* synaptics-prometheus: Reload the device version after update
* trivial: wacom: remove coretronic config from Moffett scope
* trivial: Fix a NULL/FALSE confusion
* trivial: Add a BR for Fedora
* trivial: Fix coreboot commit to fix CI
* trivial: libfwupdplugin: clarify name of self test
* plugins/coreboot: Improve version detection
* plugins/coreboot: Get rid of FU_HWIDS_KEY_BIOS_VENDOR in coldplug
* trivial: Move progressbar out of libfwupdplugin
* trivial: Unexport fu_test_get_filename()
* trivial: Unexport fu_test_compare_lines()
* trivial: Unexport fu_test_loop_run_with_timeout()
* trivial: Do not include non-introspectable functions in the GIR
* trivial: Fix up a few introspection problems in FwupdPlugin
* trivial: Include the Fwupd GIR in the FwupdPLugin GIR
* trivial: Never add duplicate symbols to the map file
* trivial: Properly namespace the defines in the exported header
* Install development files for libfwupdplugin
* Convert libfwupdprivate to a shared library libfwupdplugin
* trivial: Allow building GCab from a subpackage
* trivial: Fix under-include to define O_RDONLY
* trivial: Allow compiling without <glib-unix.h>
* trivial: Do not use FuProgressbar in dfu-tool
* synaptics-prometheus: Manually set the bootloader mode when attaching
* trivial: Split out a new helper funtion
* trivial: Add some optional debugging when hotplugging devices
* trivial: Include the correct header for S_IRWXU
* Always use the more portable 3-arg form for open()
* trivial: Untangle FuHistory from FuPlugin
* trivial: Allow compiling without <fnmatch.h>
* Revert "synaptics-rmi: Use the build ID as the version number to match the vendor tool"
* Add missing documentation from the plugin interface
* trivial: fu-udev-device: remove a prototype that was missed in b3d4d2ff
* trivial: add missing gtk-doc fields for many files in src/
* trivial: fix compile failure without gudev
* synaptics-prometheus: Mirror the _IS_BOOTLOADER from device to config
* Allow setting the device flags using GObject properties
* vli_usbhub: Set the composite parent at construction time
* synaptics-prometheus: Set the composite parent at construction time
* Allow plugins to set the parent during construction
* vli-usbhub: Whitelist the PD and I²C devices
* Set the protocol per-device not per-plugin
* synaptics-rmi: Use the build ID as the version number to match the vendor tool
* Create a REV_00 instance ID as this may be what the vendor needs to target
* fu-util-common: Invert default behavior for reboot and shutdown prompts
* trivial: fu-plugin-vfuncs: Add GTK documentation for all vfuncs
* Make gudev a compile-time option
* trivial: Set the offline trigger using an environment variable
* trivial: ci: pull lintian from unstable for now.
* trivial: stop including fu-hash.h as part of fu-plugin-vfuncs.h
* Fix shebangs on scripts
* trivial: Use prefixes for DATADIR in config.h for portability
* Allow compiling GUsb as a subproject
* trivial: fu-udev-device: add a to_string func for debugging
* trivial: Don't assume that plugins end in .so
* trivial: optionrom: remove unneeded includes
* trivial: debian: ci: ignore library-not-linked-against-libc for more
* trivial: remove version-format.md
* trivial: Allow compiling without pwrite()
* trivial: Allow compiling without <errno.h>
* trivial: Allow compiling without realpath()
* trivial: Allow compiling without HAVE_LC_MESSAGES
* trivial: Allow compiling without getuid()
* trivial: Allow compiling without <sys/ioctl.h>
* trivial: Allow compiling without <poll.h>
* trivial: Allow compiling without <sys/utsname.h>
* Ensure the _get_type() gets the same ABI version as the constructor
* Use the correct unlocker when using GRWLock
* trivial: plugins: only build coreboot when option set
* fwupdtool: don't show a warning when calling `get-plugins`
- Changes from version 1.3.4:
* trivial: Don't force specific linker flash when cross building
* dell: Use the more portable g_usleep()
* trivial: Fix unused header includes
* vli-usbhub: Make erasing less verbose and writing more obvious
* vli-usbhub: Correctly print the 24-bit USB3 offset
* vli-usbhub: Print the PD firmware offset and size for debugging
* vli-usbhub: Open the parent device before attempting to read or write from the child
* vli-usbhub: Set the install duration for the PD device
* trivial: Fix a failed error prefix string
* trivial: wacom-raw: Remove embedded from device name
* wacom-raw: Correct HWID support
* uefi: Just use a uint16_t for BootNext processing
* uefi: Use a simpler entries set algorithm
* vli-usbhub: Add support for writing using I2C passthru
* vli-usbhub: Support updating PD devices that share the hub flash
* vli-usbhub: Support the PD file format
* trivial: uefi: correct a NULL pointer dereference
* uefi: fall back to `ID_LIKE` when the path for `ID` doesn't exist (Fixes:# 1566)
* uefi: Make generate_binary.sh more robust
* Tokenize the Intel Hex file before parsing
* trivial: Detect the USB version automatically
* trivial: fu-util/fu-tool: explicitly block unsupported flags
* Add support for matching <firmware> requirements on device parents
* Skip cleanup after device is done updating if `will-disappear` is set (Fixes: #1529)
* efi: use a wildcard section copy for final EFI generation
* modem-manager: explicitly use plain version format
* modem-manager: add quirks for the Foxconn T77W968 modules
* Allows confined snaps to activate fwupd via D-Bus
* trivial: thunderbolt: clarify error message
* Add a new property `Interactive` to the daemon
* trivial: contrib/get-version.py: require git less hard
* superio: Never read from port offset zero
* superio: Fix regression when coldplugging superio devices
* trivial: Fix Fedora CI build
* trivial: Fix the autobuilt spec file with the new tarball version
* Dynamically determine release version
* trivial: synapticmst: allow missing `/proc/modules`
* synapticsmst: filter invalid chip IDs
* trivial: Provide some defines for common image names
* Allow aborting early when using fu_archive_iterate()
* Add fu_firmware_image_set_version() for future use
* modem-manager: increase re-enumeration delay to 20000ms
* modem-manager: add counterpart GUID for the DW5821e/eSIM
* Add versions formats for the Microsoft Surface devices
* usb: make loading vendor/product/serial strings non-fatal
* trivial: Fix the protocol ID for VLI usbhub devices
* trivial: wacom-raw: add more device IDs for Dell devices
* trivial: contrib: don't require TSS for debian archs without EFI
* fu-udev-device: Adjust bounds checking to be safer
* fu-udev-device: Don't assume all devices have `device_file`
* synaptics-rmi: correct an error cleaning up on probe
* trivial: fu-udev-device: add some safety checks for fd
* udev-device: fix offset of vendor id of hidraw devices
* flashrom: switch to upstream source
* trivial: fu-plugin: only show an error once "failed to open plugin" was being prefixed twice
* trivial: debian: only use mingw-w64-tools in archs with UEFI plugin
* fastboot: Fix a regression when updating modem firmware
* trivial: conflict with old unifying plugin
* Rename unifying plugin to logitech-hidpp (Fixes: #1329)
* Add a new contrib script for installing a Dell BIOS from an EXE file
* trivial: add-capsule-header: rename to make it easier to import
* trivial: simple_client: make it easier to reuse code
* trivial: firmware-packager: make it easier to reuse code
* trivial: add-capsule-header: make it actually work
* trivial: fix some gtkdoc sections
* Bump the required gudev version
* trivial: Fix a compile error with older versions of gudev
* trivial: wacom: add vid/pid for panels in Moffett
* trivial: post release version bump
- Changes from version 1.3.3
* unifying: notify users to replug when using dfu control (Fixes: #1383)
* trivial: 8bitdo: set a transient failure while waiting for user action
* libfwupd: Add a new error type for user action needed
* trivial: 8bitdo: show the same message for SN30pro and SN30pro+
* trivial: Fix up some typos from codespell
* trivial: Ensure config.h is included in all source files
* trivial: Fix up some NULL/FALSE confusion
* trivial: Add all the _LAST enums that shouldn't be checked for ABI
* trivial: Fix a typo that means that UEFI results were never cleared
* Always report the update-error correctly for multiple updates
* trivial: Fix fwupdmgr get-history if the firmware was not installed from the LVFS
* trivial: Do not emit a warning if a child has no version number
* Move the file descriptor lifecycle into FuUdevDevice
* trivial: Fix some GtkDoc annotations
* ebitdo: Modernize the plugin to use FuFirmware
* nitrokey: Use fu_common_dump_raw() when debugging
* thunderbolt: Create a unique GUID including Thunderbolt controller path
* Use device safety flags to show prompts before installing updates
* trivial: Use the new possible_plugin support for USB devices too
* jabra: Move the Jabra-specific detach out into its own plugin
* Ensure the device is open when doing the subclassed prepare() and cleanup()
* vli-usbhub: Add support for updating V2 devices
* Allow verifying the device image itself from fwupdtool
* Use XMLb to query quirks
* trivial: ci: disable pulling libxmlb from unstable
* synaptics-prometheus: Don't add a config-subdevice in bootloader mode
* dfu: Use the VID/PID to identify devices without download capability in runtime
* trivial: debian: remove some unneeded lintian
* trivial: debian: bump compat version
* ebitdo: Add SN30Pro+ to recognized quirk list (Fixes: #1503)
* dfu: Add several quirks for Realtek camera hardware
* dfu: Always mark devices as UPDATABLE
* uefi: use `genpeimg` to mark ASLR and DP/NX on EFI binary
* trivial: solokey: correct a typo
* trivial: fu-util: fix typo
* uefi: rework ESP path detection and lifecycle
* trivial: uefi: show more metadata in to_string method
* trivial: fu-device: add new method to remove metadata
* Add a plugin to update VIA USB hub hardware
* trivial: Add fu_common_read_uint8_safe()
* trivial: Fix two typos in fu_common_read_uint16_safe()
* solokey: Allow parsing firmware with fwupdtool
* Allow fwupdtool to dump details of common firmware formats
* trivial: Do not do system coldplug when using FU_ENGINE_LOAD_FLAG_NO_ENUMERATE
* trivial: fu-self-test: set polling self tests to slow
* trivial: fu-tool: Allow `detach`/`attach` to prompt for device
* Strip trailing whitespace from USB descriptors
* trivial: Add fu_common_read_uint16_safe()
* trivial: Add version to the FuFirmware->to_string() output
* Add fu_firmware_set_version()
* Add a systemd preset file for `fwupd-refresh.service`
* trivial: dell: work around a memory leak caught by address sanitizer
* ebitdo: if the device has the will disappear flag, don't wait for ack (Fixes: #994)
* Add a new plugin for working with eMMC devices (Fixes: #1455)
* fu-engine: Check multiple plugins if quirks match
* trivial: don't try to enable LVFS from systemd
* trivial: coreboot: fix a clang compiler error
* fu-util: Add user friendly strings for all device flags
* Add new device flags indicating update resilience
* plugins: Add coreboot plugin
* fu-plugin: Add fu_plugin_get_hwid_replace_value
* trivial: Increase verbosity when actually updating devices
* trivial: Allow plugins to use WAIT_FOR_REPLUG in prepare and cleanup
* Add FuDevice->prepare() and FuDevice->cleanup() vfuncs for future use
* dfu: Implement FuDevice->to_string()
* trivial: colorhug: fix a crash that occurs when flashing sometimes
* trivial: fu-util: break out of automatic reports if one is not automatic
* thunderbolt: some more clarifications when using ICL
* trivial: fwupd-refresh: activate motd if using systemd v243 or later
* trivial: fwupd-refresh: allow exit code 2 for success
* trivial: synaptics-cxaudio: Add Google Pixel buds
* trivial: arch: ci: Wait some time for tpm_server to start up
* Allow a custom FuFirmwareImage->write() in superclassed objects
* dfu: Remove two completely unused helpers
* dfu: Make DfuFirmware derive from FuFirmware
* dfu: Make DfuImage derive from FuFirmwareImage
* dfu: Remove private headers that do not need to exist
* Fix device flag filtering
* trivial: fu-engine: Don't compare device and content checksums
* fu-engine: Read all releases and convert versions when comparing
* Add new flags `can-verify` and `can-verify-image`
* trivial: make verify and verify-update safer
* trivial: test: add checksums for "stock" 1.2.2
* trivial: fu-udev-device: use parent udev device to indicate `internal`
* trivial: fix TPM2 simulator tests for arch
* trivial: uefi: don't add PCRs with all 0's
* trivial: Fix a recent regression causing a double-free
* synaptics-cxaudio: Support the ThinkPad USB-C Dock Gen2
* trivial: fu-util: add some extra checks around automatic reports
* trivial: fu-tool: typo
* fu-systemd: Use correct method for stopping units.
* trivial: fu-udev-device: Use ID_PCI_CLASS_FROM_DATABASE if name not set
* trivial: fu-plugin: quiet down debug output for optionrom plugin
* 8bitdo: use will-disappear flag for sf30/sn30 controllers (Fixes: #783)
* trivial: ebitdo: don't dump out firmware header unless plugin verbose
* trivial: ebitdo: don't use local errors when writing firmware
* Add a new device flag for indicating device won't come back
* wacom-emr: Fix a regression for EMR devices
* Add a generic DFU firmware object for plugins to use
* dfu: Use FwupdInstallFlags rather than a DFU-specific version
* dfu: Remove functionality for modifying DfuSe files
* dfu: Remove functionality you can do now with fwupdtool
* dfu: Remove the merge command as it's unused and broken
* trivial: Add fu_firmware_parse_file() helper for future use
* trivial: Remove the fuzzing details for DfuPatch
* trivial: Add klass->to_string for superclassed FuFirmwareImage objects
* dfu: Remove DfuPatch as no vendor actually uses this
* dfu: Don't wrap provided VID-PID functions
* dfu: Use the standard FuDevice custom flags functionality
* dfu: Use klass_device->write_firmware() directly
* dfu: Use the generic fu_plugin_usb_device_added() function
* dfu: Use daemon flags to ignore devices rather than a special flag
* dfu: Set the device state directly to avoid proxying signals
* dfu: Use the built-in detach() and attach() vfuncs
* Read firmware back from the device as a FuFirmware
* dfu: Remove a pointless function
* dfu: Remove support for the Metadata Store Proposal
* dfu: Remove XTEA support
* dfu: Remove the SREC and IHEX parsing out of the DFU plugin
* ebitdo: Use klass_device->write_firmware like other plugins
* trivial: Remove G_BEGIN_DECLS from all private headers
* Remove FU_PLUGIN_RULE_REQUIRES_QUIRK as all the plugins now use it
* Set all FuUdevDevice plugins to use FU_QUIRKS_PLUGIN
* thunderbolt: recognize new 'generation' sysfs attribute
* Rename and modernize the udev plugin
* synaptics-rmi: Also add the product ID as a GUID without the minor version
* synaptics-rmi: Correctly set the payload length rather than hardcoding it
* synaptics-rmi: Write the core config correctly
* synaptics-rmi: Decode BL7 status failures as actual errors
* synaptics-rmi: Add some trivial debugging to help debug a write problem
* trivial: uefi: Make efivarvs errors clearer (Fixes: 1330)
* trivial: uefi: don't prefix efivar errors
* trivial: Remove some now-unused vfuncs
* altos: Modernize the plugin to simplify it
* Create the custom plugin GType in common code
* Reduce more boilerplate in plugins
* synaptics-rmi: Check the correct register when querying bootloader mode
* trivial: fu-engine: fix never reporting remotes
* trivial: fu-util: don't show warnings for no reports to upload
* trivial: debian: remove more conffiles from transitions (Closes: #932617)
* trivial: debian/control*: Update for fwupdate transition
* trivial: Fix a tiny memory leak when starting the daemon
* modem-manager: Fix a tiny memory leak when starting the daemon
* synaptics-rmi: Copy the behavior of rmi4utils for BL7 detach
* synaptics-rmi: Simplify fu_synaptics_rmi_device_read()
* synaptics-rmi: Set the version after ->setup has run
* synaptics-rmi: Use the correct mask when getting the bootloader mode on BL7
* syanptics-rmi: The build_id is 3 bytes long, not 2
* synaptics-rmi: Read the config partition the same as rmi4utils
* Provide a default implementation of common FuDevice actions
* thunderbolt-power: avoid checking for bolt support
* synaptics-rmi: Add some debugging for BL7 devices
* Fix usage of incorrect type for return value
* synaptics-rmi: Do as little as possible in device setup
* synaptics-rmi: Speed up reading the PDT from 900ms to 30ms
* fu-util: add support for a reinstall command
* trivial: fu-util/fu-tool: update re-install help text to reinstall
* trivial: fu-util: remove double printed message about succesful firmware update
* trivial: fu-util: show no updatable devices error for update command
* synaptics-rmi: Ignore the ATTN reports from the hardware when reading DATA
* synaptics-rmi: Move the fuzzing instructions to the toplevel README
* Fuzz the SREC and IHEX file parsers once more
* Use parallel fuzzing for the SMBIOS checks too
* synaptics-rmi: Fix the packing of the partition table
* Add a plugin to update Synaptics RMI4 devices
* trivial: Add a parallel fuzzing script
* trivial: fu-util: output newline after prompt.
* trivial: fix %u output in report upload
* Add a --no-domain logging option
* trivial: Fix compiler warning for impossible-to-hit condition
* Add support for automatically uploading reports
* trivial: motd: disable updating motd for now
* trivial: fwupd-refresh: fix a clash with fwupd.service (Closes: #941360)
* trivial: Fix Fedora CI
* trivial: fu-udev-device: fix some assertions
* Search up the tree for a vendor name rather than (ab)using the HID_NAME
* Add some success messages when CLI tasks have completed
* trivial: Put the boolean prompt on the same line as the text
* Never show LicenseRef-proprietary to the end user
* trivial: snap: correct install hook root directory
* Export the instructions for detaching the device
* uefi: detect unmounted ESP partitions (Fixes: #1405)
* uefi: stop recording efibootmgr output after flash
* trivial: post release version bump
- Changes from version 1.3.2:
* Add support for '<name_variant_suffix>' to disambiguate some firmware
* thelio-io: Add a plugin to detach the Thelio IO board
* trivial: uefi, dell: skip self tests with TPM if non-root (Fixes: #1396)
* trivial: dell: quiet the TSS output
* trivial: uefi: allow forcing to TPM2 via environment variable
* Do not ask the user to upload a report if ReportURI is not set
* Do not enumerate physical devices when running the internal self tests
* trivial: libfwupd: skip tests if machine-id is empty too
* Add a new plugin to update Conexant audio devices
* Export the salted machine ID as a daemon property
* Fall back to /var/lib/dbus/machine-id when required
* trivial: add stalebot (Fixes: #1393)
* trivial: dell-dock: correct another write_size error
* Align the key values to the text *width* not the number of bytes
* trivial: Move dbus directory location for snap too
* trivial: Fix some NULL/FALSE confusion
* synaptics-prometheus: Fix tiny memory leak when using FuSynapromConfig
* trivial: Fix tiny memory leak when using FuSrecFirmware
* snap: switch to core18
* trivial: Return the correct property when getting the host product
* trivial: fu-util-common: fix description wrapping (Fixes: #1378)
* fu-util/fu-tool: Map out changelogs from remotes
* fu-util/fu-tool: Better display historical information
* fu-history: Update device_modified in sql database during updates
* unifying: Use the instance ID to check for supported devices
* unifying: Ensure HID++ v2.0 peripheral devices get scanned by the plugin
* trivial: Add some more defines to the srec parser
* trivial: fix wget command in fu-tool.c
* Allow parsing a raw SREC file
* trivial: wacom: Add support for second vendor ID
* uefi, dell-esrt: Show firmware version when capsule updates unavailable
* Add some more debugging to the SREC and IHEX parsers
* Print the instance IDs if the GUIDs are unconverted
* Add fu_common_bytes_compare_raw() for future usage
* Call the set_quirk_kv() vfunc for the superclassed object
* uefi: make the TPM optional for runtime again (Fixes: #1362)
* trivial: uefi: Make the TCTI output less verbose
* Support <issues> in AppStream metadata
* Include all GUIDs when uploading a report
* Do not crash when starting tpm2-abrmd
* trivial: Update DBus conf path for example Fedora package
* Move D-Bus conf file to datadir/dbus-1/system.d
* trivial: Add fu_io_channel_write_byte_array() for future use
* trivial: post release version bump
- Package new sub-packages typelib-1_0-FwupdPlugin-1_0 and
libfwupdplugin1.
* Mon Oct 28 2019 schwab@suse.de
- Fix file list
* Wed Sep 18 2019 bjorn.lie@gmail.com
- Update to version 1.3.1: (jsc#SLE-10751)
* Allow disabling all plugins
* trivial: Specify the tpm2-tss-devel version in the example spec file
* Move to CI Fedora 30
* modem-manager: Fix two build warnings on Fedora 30
* synapticsmst: Add another name quirk for the ThinkPad USB-C Dock
* Re-introduce GUID support to fwupdmgr and fwupdtool
* uefi-recovery: Add a plugin to add a fake ESRT entry for device recovery
* Add a DMI quirk for the Minnowboard Turbot
* trivial: Make it easy to disable or enable libflashrom for distros
* trivial: Don't use Recommends for RHEL 7
* unifying: fix timeout metadata
* ci: arch: minor improvements
* unifying: fix timeout
* Allow disabling SSL strict mode for broken corporate proxies
* trivial: Allow ignoring the daemon version check by using --force
* Try to only show DMI product name once
* trivial: fu-util-common: Show unknown devices as interesting devices
* dell: Use TSS to query and build TPM vendor strings for GUIDs
* trivial: dell: show reasons for lack of updates in `UpdateError`
* fu-util-common: strip all trailing whitespace in XML description
* trivial: fu-common: match all whitespace not just ' ' in `fu_common_strstrip`
* fu-util: show release output in get-details again
* unifying: use fu_firmware_strparse_uint16 to read be 16bit values
* unifying: fix incomplete hex file parsing
* fu-util/fu-tool: Print devices, remotes, releases using a tree
* Add aliases for `get-upgrades` and `upgrade`
* trivial: UEFI skip self tests if library fails to initialize
* libfwupd: Add a new private function `fwupd_remote_set_remotes_dir`
* trivial: add libtss2-dev into debian/control (Closes: #1324)
* trivial: Fix up the GtkDoc Since lines for API only available in 1.3.x
* trivial: Post branch version bump
* thunderbolt: Add support for kernel safety checks (Fixes: #1312)
* Include the kernel release as a runtime version
* trivial: fu-util: Drop GUID support from get-devices
* synapticsmst: Partially rewrite the plugin (Fixes #1105)
* Remove replug flag after the device comes back from reboot
* trivial: Fix running the tests on devices with the TPM in v1.2 mode
* trivial: fu-util-common: more cleanup related to topology
* trivial: fu-util: cleanup fwupdmgr get-details output
* trivial: Don't use topology printing in --verbose mode
* Make get-devices and get-topology aliases for one another
* trivial: Adjust daemon device sorting
* Make get-topology more useful by showing all information
* trivial: Fix fu_common_string_append_kv() to align properly with idx > 0
* trivial: dell-dock: correct an error preventing write_size from being set
* trivial: Do not warn about deprecated declarations
* trivial: Update BRs for the example Fedora package
* uefi: add test for TPM 2.0 PCR read function
* uefi: use tpm2-tss library to read PCR values
* fu-common: Use environment variables for systemd managed directories
* Use more systemd directives for directories
* trivial: fu-util: fix debug output for devices
* Allow turning off the timestamp prefix for debugging
* Add a ->udev_device_changed plugin vfunc
* Add fu_device_rescan() and a FuDevice->rescan() vfunc
* Remove the duplicate files in meson.build
* Hash the source files when generating the daemon hash
* Split up source files in the build script
* uefi: add support for tpm2-tools 4.X
* trivial: plugins: clarify stance on afuefi.efi
* trivial: plugins/: Update README
* trivial: disable gtkdoc by default
* trivial: update references of hughsie/fwupd to fwupd/fwupd
* Publish docs to fwupd.github.io using CircelCI
* Add support to integrate into the motd (Fixes: #1270)
* Simplify get-devices output to not show un-useful fields
* fu-engine/fu-config: Reload metadata store when configuration changes
* trivial: If no devices support updates, show messaging (Closes: #1295)
* trivial: uefi: set vendor name for system firwmare from DMI data
* unifying: update Solaar url
* thunderbolt: Fix logic to work properly with ICL thunderbolt controller
* Add fu_udev_device_get_device_file() helper
* trivial: Fix regression when using fu_device_incorporate()
* trivial: Fix a potential crash when using FuPlugin in the self tests
* synapticsmst: Make FuSynapticsmstConnection an actual GObject
* synapticsmst: Use the same style as other plugins
* trivial: Add some helper functions for GByteArray
* Do not use FuDevice metadata for the physical and logical IDs
* Use fu_common_string_append_kv() in subclassed device
* synapticsmst: Use G_DECLARE_FINAL_TYPE to simplify the object
* synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock
* trivial: remove unnecessary CUSTOMERID_DELL define
* synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock
* synapticsmst: Display the board ID in non-hex form in the error message
* synapticsmst: Use a more suitable icon for the device
* trivial: Remove unused variable
* Never use memcpy() in a possibly unsafe way
* Add a ->to_string() vfunc to FuFirmware
* Use FuFirmware as a container for firmware images
* Allow filtering devices when using the command line tools
* Be more accepting when trying to recover a failed database migration
* trivial: Add translation for X-ThunderboltController
* trivial: fixup standalone installer
* modem-manager: add counterpart GUID for the DW5821e
* solokey: Release the interface and rebind the kernel driver on close
* fu-tool: Port ability to update a single device from fwupdmgr
* uefi: Actually write the new device path if different than before
* Allow setting custom flags when using fwupdate
* trivial: Do not show a critical warning if no firmware is specified
* trivial: Fix overzealous search-replace action in user string
* Verify we don't break the ABI
* Fix a crash when stopping the fwupd service
* Relax the certificate time checks in the self tests for the legacy certificate
* trivial: add cache directory into systemd unit rw paths
* Never show AppStream markup on the console
* Do not segfault when trying to quit the downgrade selection
* trivial: Update icons for Thunderbolt and MST devices
* Add support for the SoloKey Secure
* trivial: Allow a device to *clear* a firmware version
* trivial: debian: For signed package fill out Built-Using (Closes: #932757)
* Allow specifying <firmware>GUID</firmware> to check any version exists
* trivial: post release version bump
* Release fwupd 1.2.10
* Disable the flashrom plugin by default
* trivial: thunderbolt: catch failure setting up device
* dell-esrt: Improve the experience for the plugin (Closes: #1245)
* fu-util: When unlocking prompt for reboot if applicable
* remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface
* flashrom: Only show DEBUG and DEBUG2 output if using --plugin-verbose=flashrom
* flashrom: Only call flashrom_programmer_init() on whitelisted boards
* flashrom: Fix no version format set
* fu-util: Show devices with an UpdateError in get-devices output
* trivial: uefi: use UEFI-dummy for device ID instead of just uefi
* trivial: fix error handling for non UEFI case (#1220)
* Add a specific error code for the low battery case
* Fix Fedora docker build missing directory: dist
* uefi: Determine whether running in legacy mode or not (Fixes: #1220)
* trivial: ci: debian: Only turn on flashrom when running CI
* trivial: Fix typos in error messages
* Allow client code to construct objects from GVariant blobs
* Export functionality to build an array of objects
* flashrom: Use libflashrom
* trivial: Fix the version script to pick up boxed types
* trivial: Correctly order the map entries according to vercmp rules
* trivial: Fix pylint issue in the version script
* Add meson target to fix translations
* Add support for 8bitdo USB Retro Receiver
* Use the newer features of GRWLock rather than reinventing it
* Revert "Allow SuperIO updates to be done live"
* uefi: Try to find a duplicate using the loadopt name
* uefi: Provide a quirk to disable the use of the UX capsule
* trivial: uefi: use the path for efibootmgr that was detected
* synaptics-prometheus: Fix installing CONFIG firmware updates
* synaptics-prometheus: Set the install duration from a quirk
* synaptics-prometheus: Don't emit critial warning when updating config firmware
* synaptics-prometheus: Fix missing field in the IOTA reply struct
* Create SECURITY.md
* redfish: Never set NULL device name
* modem-manager: Never set NULL device name
* ata: Never set NULL device name
* trivial: Add some parameter guards to FuDevice
* trivial: snap: make polkit directories if they don't exist (Fixes: #1205)
* trivial: fu-main: clarify missing PK file error
* synapticsmst: fix GUID generation (Closes: #1207)
* Lite Mk II flag for use-shim-unique
* trivial: circleci: try to fix automatic snap deployment
* Allow SuperIO updates to be done live
* fu-util-common: Support empty proxy strings (Fixes: #1199)
* trivial: uefi: clarify error message
* trivial: Fix non-systemd build
* trivial: Sync example spec file with downstream
* trivial: post release version bump
- Drop fwupd-bsc1143905-hash-the-source-files.patch: Applied upstream.
- Add pkgconfig(tss2-esys) BuildRequires: New dependency.
- Add gtk-doc BuildRequires and pass gtkdoc=true to meson, build
api docs even when using source service.
* Mon Aug 26 2019 glin@suse.com
- Add fwupd-bsc1143905-hash-the-source-files.patch to hash the
source files instead of libfwupdprivate.a to avoid the checksum
change due to the random naming LTO profile sections
(bsc#1143905)
* Wed Jul 24 2019 glin@suse.com
- Update to version 1.2.10:
* Disable the flashrom plugin by default
* dell-esrt: Improve the experience for the plugin (Closes: #1245)
* fu-util: When unlocking prompt for reboot if applicable
* remove those PIDs with Bluetooth interface, Wacom updater
doesn't support updating from Bluetooth interface
* flashrom: Only show DEBUG and DEBUG2 output if using
- -plugin-verbose=flashrom
* flashrom: Only call flashrom_programmer_init() on whitelisted
boards
* flashrom: Fix no version format set
* fu-util: Show devices with an UpdateError in get-devices
output
* Add a specific error code for the low battery case
* Fix Fedora docker build missing directory: dist
* uefi: Determine whether running in legacy mode or not
(Fixes: #1220)
* Allow client code to construct objects from GVariant blobs
* Export functionality to build an array of objects
* flashrom: Use libflashrom
* Add meson target to fix translations
* Add support for 8bitdo USB Retro Receiver
* Use the newer features of GRWLock rather than reinventing it
* uefi: Try to find a duplicate using the loadopt name
* uefi: Provide a quirk to disable the use of the UX capsule
* synaptics-prometheus: Fix installing CONFIG firmware updates
* synaptics-prometheus: Set the install duration from a quirk
* synaptics-prometheus: Don't emit critial warning when updating
config firmware
* synaptics-prometheus: Fix missing field in the IOTA reply struct
* Create SECURITY.md
* redfish: Never set NULL device name
* modem-manager: Never set NULL device name
* ata: Never set NULL device name
* synapticsmst: fix GUID generation (Closes: #1207)
* Lite Mk II flag for use-shim-unique
* fu-util-common: Support empty proxy strings (Fixes: #1199)
- Add python3-setuptools to BuildRequires for
generate-version-script.py
* Tue Jun 25 2019 mpluskal@suse.com
- Update to version 1.2.9:
* Release fwupd 1.2.9
* trivial: Add two new translatable strings for new category types
* Check if the system is offline during install, rather than at startup
* Prompt the user to shutdown if requried when installing by ID
* Use the correct file extension for the offline updates cache
* trivial: Allow using --force to use the wrong daemon version
* trivial: Display the correct expected command
* standalone-installer: Be smarter about existing installed fwupd
* Add a plugin to update Synaptics Prometheus fingerprint readers
* trivial: standalone-installer: rename uninstall argument to cleanup
* fu-util: Check the daemon version is at least the client version
* fu-util: Check that daemon is started by expected unit
* fu-util-common: when stopping a daemon, check for snap too
* Allow using --force to trigger a duplicate offline update
* trivial: Allow using FuUsbDevice without a GUsbDevice
* trivial: Copy the icons if unset for the device child
* trivial: Copy the physical ID if unset for the device child
* trivial: Ensure the parent ID is up to date if the device ID changes
* trivial: Fix typo when setting the parent ID
* trivial: Disable the flatpak CI build
* Allow handling FORCE for devices that subclass FuDevice
* uefi: Fix a libasan failure when reading a UEFI variable
* trivial: Fix a memory leak found using libasan
* trivial: Fix an libasan failure in the dell plugin
* trivial: Fix some dead code spotted by coverity
* trivial: Fix a typo spotted by coverity
* trivial: Fix a missing config.h include in a new source file
* Dynamically read path to use for /system-update
* Display the remote warning on the console in an easy-to-read way
* ata: Set version format to plain for devices obtained from udev
* trivial: Only apply SmbiosManufacturer to release version for internal
* trivial: Fix two bugs in the hardware self tests script
* Never guess the version format from the version string
* Only force a semver when the device opts-in
* Export the version-format to clients
* Add missing gtk-doc documentation
* dfu: Add some trivial, but useful, debugging for AVR DFU devices
* dfu: Correctly identify DFU firmware that starts at offset zero
* dfu: Don't keep showing trivial debug output
* dfu: Reset the forced version during attach and detach
* ata/nvme: For devices running Dell firmware, set `VersionFormat` (Fixes: #1169)
* fu-engine: Check if VersionFormat is ambiguous when adding devices
* trivial: Fix fwupdate --apply
* Only use class-based instance IDs for quirk matching
* trivial: dell-dock: set minimum board to 6
* trivial: post release version bump
* Wed May 08 2019 maurizio.galli@gmail.com
- Update to version 1.2.8:
* Don't upload reports when the user has configured their system in a broken way
* Allow setting the daemon verbose domains at runtime
* Allow fwupdmgr to modify the daemon config
* Do not compare version formats when the release format is unknown
* Do not fall back integers to a plain version format
* Use the device version format when converting the release version
* Set the VersionFormat using the metadata or the UEFI quirk
- Changes from version 1.2.7:
* l10n: Create Lithuanian translation file
* l10n: Update LINGUAS
* Updated: Add support for 8BitDo M30.
* modem-manager: increase the timeout to wait for modem after uninhibited
* modem-manager: implement qmi pdc active config selection as attach()
* fu-engine: When removing activation flag match the correct version
* Require --force to install a release with a different version format
* Match the old or new version number when setting NEEDS_REBOOT
* Make an error message clearer when there are no updates available
* Add support for the not-child extension from Logitech
* thunderbolt: Set require-ac for Thunderbolt devices
(Fixes: gh#hughsie/fwupd#1142)
* Fix some typos spotted using codespell
* Add a component categories to express the firmware type
* fu-tool: Port get-history command to fwupdtool
* Recreate the history database if migration failed
* Move the core built-in 'fwupd' remote over to the dell-esrt plugin
* snap: Add a custom systemd unit to call activation on shutdown
(Fixes: gh#hughsie/fwupd#1125)
* ata: Flush cache before standby and activate
* synapticsmst: blacklist plugin when using amdgpu
(Fixes: gh#hughsie/fwupd#1121)
* uefi: add a new option to specify the os name
* Return the newest device when using fu_history_get_device_by_id()
* uefi: More carefully check the output from tpm2_pcrlist
* uefi: Don't overwrite CustomFlags if set from a quirk
* Shut down the daemon if the on-disk binary is replaced
* ata: Correct activation functionality
* Fix version comparisons after reboot for some formats
* fu-tool: save history from stuff installed with `fwupdtool`
- Changes from version 1.2.6:
* ata: send ATA standby immediate when activating firmware
* offline: Be more graceful when dealing with Plymouth failures
* Save the new version in the history database for offline updates
* Show the DeviceID when showing the updates list
* Allow forcing an offline-only update on a live system using --force
* Do not schedule an update on battery power if it requires AC power
* superio: Add InstallDuration default value
* superio: Add support for writing new e-flash contents
* superio: Fix reading the attestation checksum
* superio: Add support for reading the device checksum
* superio: Use the chipset ID in the device name
* superio: Move the device flush before getting the register map
* superio: Move all the IT89xx code to a subclassed device object
* superio: Move all the IT85xx code to a subclassed device object
* superio: Split and export fu_superio_device_ec_writeX()
* superio: Remove the port from fu_superio_device_ec_read()
* superio: Move the register read/write into the FuSuperioDevice object
* superio: Check the IOBAD0 is usable during setup
* superio: Use fu_device_set_firmware_size()
* superio: Move some constants out to the common header
* superio: Use GObject properties in FuSuperioDevice
* superio: Convert FuSuperioDevice to be derivable
* Update Plymouth when updating pending firmware
* Ask to reboot after scheduling an offline firmware update
* Do not fail when scheduling more than one update to be run offline
* Allow running offline updates when in system-update.target
* Fix the location of fwupdoffline in the service file
* Add optional vfuncs to allow detaching and attaching verify()
* superio: Add list of SPI commands for future usage
* Add a verify-update command to fwupdtool
* uefi: Actually upload the UPDATE_INFO entry for the UX capsule
* superio: Get the chip size from the EC rather than hardcoding
* uefi: Check the error code of QueryCapsuleCapabilities() correctly
* Update the UEFI UX Capsule Header checksum when needed.
* uefi: Copy the shimx64.efi binary for known broken firmware
* Correctly get the check the new version for devices that replug
* Add a simple script to add a capsule header
* Ensure the PKCS-7 client certificate exists at startup
* fix makecab directive options
* fwpup.service: use display-manager.service instead of gdm.service
* Allow signing the fwupd report with the client certificate
* Add a D-Bus method to generate a signature using the self-signed client certificate
* Allow signing and verifying data using a PKCS-7 self-signed client certificate
* Fix a critical warning when loading a PKCS-7 certificate with no DN
* Include all device checksums in the LVFS report
* modem-manager: Fix a trivial build warning
* superio: Fix a trivial build warning
* Move out the offline update functionality to a new binary
* Do not reboot when failing to start fwupd during offline updates
* Do not write the schema version to the db when loading
* Do not recreate XbSilo caches when running on a readonly filesystem
* Add the fwupdagent binary for use in shell scripts
* Allow restricting firmware updates for enterprise use
* standalone-installer: new --allow-older and --allow-reinstall options
* Show the upgrade and downgrade flags when getting releases for a device
* Rename FwupdRelease:trust-flags to FwupdRelease:flags
* fu-tool: Save device state to @LOCALSTATEDIR@/lib/fwupd/state.json on actions
* modem-manager: implement support for qmi-pdc
* Add a plugin to support ModemManager hardware
* fu-tool: Don't let failing to find dbus prevent engine from starting
* ata: Support delayed activation
* dell-dock: Use activation when calling fwupdtool activate
* Add a support for delayed activation
* uefi: Fix the self tests when running on Fedora SilverBlue
* Do not fail to start the daemon if tpm2_pcrlist hangs
* po/make-images.sh: quote LOCALEDIR and PYTHON3
* meson: print stderr of python3 command instead of stdout
* Revert "contrib/debian: Switch to debian unstable"
* Add elogind support
- Changes from version 1.2.5:
* uefi: fix segfault in fwup_set_update_statuses
* Show in Flathub correctly
* debian: explicitly depend on shared-mime-info
* superio: Implement detach() and attach()
* superio: Correct the names of some constants and improve debugging support
* dell-dock: Filter the last supported payloads of certain board 4 SKUs
* circleci: Manage the lifecycle of the snap
* Add support to run snap build in CircleCI
* wacom-usb: Use the correct buffer format for the touch module
* wacom-usb: Set the install duration for each device type
* wacom-usb: Return with an error if there were too many retries
* wacom-usb: Make updating less verbose
* Convert all child instance IDs when converting the parent
* uefi: Allow devices to create more complete fake UEFI devices
* unifying: Fix regression when recovering from failed flash
* Ensure libxmlb dir exists for LGTM.com
* Add C build configuration for LGTM.com
* Use G_BEGIN_DECLS correctly for internal headers
* standalone-installer: Fix issue found by LGTM
* Use '#pragma once' to avoid a lot of boilerplate
* Force LGTM to see Python 3
* fwupd: Hide firmware-packager behind meson option`
* fu-common-cab: Correct handling of CAB files w/ nested directories and older libgcab
* Fix a regression in using the InstanceIDs for quirk matching
* thunderbolt: Convert the instance IDs as we never open the device
* udev: Manally call fu_device_setup() to convert the instance IDs
* fu-tool: Correct a crash caused by calling fwupdtool update
* fu-tool: Don't fail if dbus is unavailable
* contrib/debian: Switch to debian unstable
* wacom-usb: Record the block number when failing
* wacom-usb: The touch address is big endian
* wacom-usb: Accept a non-binary IHEX file for the touch update
* wacom-usb: Only poll when the device status is 'busy'
* wacom-usb: Only reboot the device when all composite devices have been updated
* wacom-usb: Fix flashing failure with latest Intuos Pro tablet
* dfu: Fill holes when reading SREC files
* Add fwupd_guid_from_string() to drop dep on uuid
* wacom-raw: Check the InstanceID rather than GUID
* Defer the InstanceID->GUID hashing until after setup
* ata: Check for USB enclosures as well
* Do not use efivar just to print a mixed endian GUID
* Add fu_device_add_instance_id() and prefer explicit conversion
* Report the DeviceInstanceIDs to `fwupdmgr get-updates`
* Export some of the GUID functionality
* Allow a plugin to set _ANOTHER_WRITE_REQUIRED to run more than one plugin
* nvme: Add an extra check for Dell plugins to avoid false positives
* ata: Add support for detecting Dell GUIDs
* Fix the self tests when using glib2 >=2.59.0
* Add support to call composite prepare and cleanup using fwupdtool
* uefi: Disable -Wno-address-of-packed-member
* uefi: Don't unconditionally enable Werror for the EFI binary
* Disable -Wno-address-of-packed-member
- Changes from version 1.2.4:
* Remove the autogenerated headers in the gettext files
* ata: Default to the non-activation 0xE subcommand
* fastboot: Use a much longer timeout as the removal delay
* fu-progressbar: be more quiet when running non-interactive
* fu-tool: Show UpdateMessage if applicable for install command
* dfu: Simplify the SREC parser to avoid a crash with an invalid file
* wacom-raw: Use the correct error codes when the panel is not supported
* wacom-usb: Add some more information to the README
* fu-keyring-utils: Don't fail missing PKI directory when compiled with GPG/PKCS7
* dell: Check that the flash interface command is available
* wacom-usb: Fix the plugin name to allow devices to be updated
* fastboot: flash the partition after downloading the file
* uefi: Add a quirk to use the legacy bootmgr description
* ata: Mark all devices as needing a reboot
* ata: Add a new plugin to upgrade firmware on ATA/ATAPI hardware
* udev-device: Add a utility function for debugging
* udev-device: Set the firmware revision automatically
* udev-device: Set the serial number automatically
* udev-device: Fall back to non-database model and vendor values
* udev-device: Fix critical warning if the device has no parent
* dell-dock: Add support for a passive flow
* Add support for an `UpdateMessage` and display it in tools
* fu-tool: Port the `get-updates` command over
* When using `directory` remote type automatically generate metadata
* libfwupd: Add support for new remote type "directory"
* Ensure cabinet archives always have a container checksum
* Add support for a per-release source and details URL
* When generating a CAB Silo use the prefix "components"
* uefi: Add a trivial debugging statement to debug a UX capsule failure
* uefi: Use fwup_new0() to allocate the updates table array
* nitrokey: Correct Nitrokey Storage invalid firmware version read
* dell-dock: Add support for flashing Thunderbolt over I2C
* wacom-raw: Add a plugin to update Wacom embedded EMR and AES panels
* fu-util/fu-tool: sync up reboot and shutdown behavior
* dfu: Ignore the SUB ASCII value
* dfu: Fix the parser to support extended segment addresses
* dfu: Support ihex files with leading comments
don't show an error
* uefi: Correct a boot order creation bug (Fixes: gh#hughsie/fwupd#956)
* uefi: Remove all variable length arrays
* uefi: Fix a logic bug in fwup_search_file()
* uefi: Use _cleanup_free in one more place
* uefi: Do not pass required attrs to fwup_delete_variable()
* uefi: Delete the old Linux-Firmware-Updater boot entry
* uefi: Use the GNU-EFI BOOL type
* Check if plugin changed after the device attaches or detaches
* uefi: Refactor and simplify the EFI loader
* Show a console warning if loading an out-of-tree plugin
* UEFI: Do the UX checksum calculation in fwupd
* wacom-usb: Add two more Intuos tablets
* nvme: Add the needs-shutdown quirk to Phison NVMe drives
* Add _NEEDS_SHUTDOWN flag for devices
* Use GCC __cleanup__ features in the EFI loader
* nvme: Add flag to support manually aligning the firmware to the FWUG value
* nvme: Support FGUID to get the SKU GUID
* nvme: Support FWUG to get the write block size
* nvme: Add trivial comment to clarify address bitshifting
* uefi: Do not check the BGRT status before uploading a UX capsule
* dfu: Fix flashing various Jabra devices
* upower: Add support for checking battery percentage
* nvme: Check the return code of the admin passthru ioctl
* fu-tool: Add support for an 'update' command to fwupdtool
* dell-dock: Set minimum board to board 4
* dell-dock: Workaround a manufacturing bug for board level 4
* dell-dock: Wait longer for re-enumeration on TBT SKU
* superio: Support IT89xx devices
* fu-main: remove incompatible locale error message
* Add a new plugin checklist (Fixes: gh#hughsie/fwupd#899)
- Dropped obsolete patch: fwupd-bsc1130056-change-esp-os-name.patch
(upstream PR: gh#hughsie/fwupd#1119
- Fixed fwupd-bsc1130056-change-shim-path.patch so that it works
with the new files
- Cleaned up changelog
* Fri May 03 2019 dimstar@opensuse.org
- Stop shipping polkit rules, as we have the distro specific setup
in polkit-default-privs (boo#1125428).
* Thu Mar 28 2019 glin@suse.com
- Add fwupd-bsc1130056-change-esp-os-name.patch to change the
OS directory in ESP (bsc#1130056)
- Add fwupd-bsc1130056-change-shim-path.patch to set the default
shim binary for openSUSE/SLE (bsc#1130056)
- Link fwupd*.efi.signed to fwupd*.efi as requested by fwupd
(bsc#1129466)
* Tue Feb 05 2019 mail@bernhard-voelker.de
- fwupd.spec: fix shell syntax error in %postun section (boo#1120363).
* Thu Jan 10 2019 bjorn.lie@gmail.com
- Update to version 1.2.3:
* Correctly migrate the history database
- Changes from version 1.2.2:
* Log an error if started with an incompatible locale
* Fix building with -Wl,-z,defs
* ebitdo: Fix the reported version number if the daemon locale is
not C.UTF-8
* Add Dell TB18DC to the known devices list
* Allow replacing the last byte in the image when using 'dfu-tool
replace-data'
* Check the device checksum as well as the content checksum
during verify
* Submit the device firmware checksum and update protocol in the
submitted report
* Include the device checksum and update protocol in the
historydb
* uefi: Add the PCR0 value as the device checksum for system
firmware
* Add new API to get the release protocol from the metadata
* Allow plugins to define support for a 'well-known' protocol
* uefi: When adding headers set the header size to 4k
* uefi: Append the header on capsules without headers from Linux
* flashrom: Ensure the quirks database is set on the new object
* uefi: Do not add devices with invalid GUIDs
* Do not allow a GUID of zero
* Add shared functionality for reading and writing with
O_NONBLOCK
* Only run attach and detach if the device is in the wrong mode
* Sanitize the version if the version format has been specified
* wacom-usb: Remove the DTH generation hardware as it will not
work with fwupd
* thunderbolt: Remove a superfluous boundary condition when
verifying update
* Add a plugin to update hardware that supports fastboot
* Fix a regression when doing GetReleases on unsupported hardware
* dfu: Require a specific USB class and subclass for DFU mode
* Correctly parse format the version numbers correctly using old
metadata
* amt: Fix a crash if AMT returns an empty response
* Check plugins set error on failure
* contrib: Add a simple python3 client
* installed-tests: Adjust to actually use a remote for installed
tests
* Add more standard USB identifier GUIDs
* wacomhid: Rename to wacom-usb
* Provide a way for plugins to decompress a custom archive to ram
- Changes from version 1.2.1:
* Remove DaemonVersionFormat=quad
* Shut down the daemon after 2h of inactivity
* Create a silo index to speed up GUID queries
* Fix flashing the 8bitdo SF30
* Speed up fwupd startup by loading less thunderbolt firmware
* Query the XbSilo when calling fu_plugin_check_supported()
* Guess the version format when it is not provided
* Fix a use-after-free when using valgrind and --immediate-exit
* Add per-release install duration values
* Fix showing the custom remote agreements
* Be more explicit setting the update state
* Include the os-release information in the release metadata
- Changes from version 1.2.0:
* ebitdo: remove SF30/SN30 pro device ids
* dell-dock: Drop delayed MST callback routine
* synapticsmst: Adjust EVB board handling
* synapticsmst: Remove the content checking of firmware
* synapticsmst: Access Board ID through memory instead In
firmware images HDCP 2.2 will be enabled by default,so access
to flash region will fail.`
* contrib: Adjust flatpak build for moving to flathub
* dell-dock: Prefer to flash VMM5331 via I2C instead of DP aux
* Use HTTPS_PROXY if set
* firmware-packager: Make it clearer to use
* Sort the firmware sack by component priority
* flatpak: Update gnu-efi to latest version
* amt: Set the full device version including the BuildNum
* fwupdmgr/fwupdtool: Move monitor command to fwupdtool
* fwupdmgr/fwupdtool: Move firmware builder from fwupdmgr to
fwupdtool
* Add version format quirks for several Lenovo machines
* uefi: Set the quirks on created devices
* dell_dock: Use correct offset for finding version of MST
* dell-dock: Add missing unlock call for MST via dell_dock plugin
* Support the Intel ME version format
* Port from libappstream-glib to libxmlb
* Bump requirement to meson 0.46.0
* fu-main: Catch SIGTERM while update is in progress
* fu-tool: Stop any running daemon over dbus before loading
engine
* meson: Bump dependency to 0.44 and adjust sysconfdir handling
* dell-dock: If marketing name is invalid don't fail
initialization
* Readme Updated: Added KDE Discover as one more graphical
front-end available for fwupd.
* dell-dock: Correct a situation that error wasn't propagating
* Don't segfault if a plugin returns FALSE from UpdateFunc with
no error set
* dell-dock: Use different debug strings for each device type
* dell-dock: Don't use the VLA feature in the new dock
* Add a plugin for an upcoming Dell USB-C dock
* contrib: Add information on how to use debugging scripts
* Allow setting the version format from a quirk entry
* Don't use AppStream-glib for string helpers
* Don't use AppStream-glib for version helpers
* Don't use AppStream-glib for the GUID helpers
* fu-device: Ensure that parent ID is created before creating
quirked children
* Update all sub-devices for a composite update
* Stop showing the current release during updates in fwupdmgr
* uefi: Move the TPM unlocking functionality from the Dell to
UEFI plugin
* Run the Dell plugin initialization after the UEFI plugin
* thunderbolt-power: Fix possible linker problem
* Allow firmware files to depend on versions from other devices
* fu-debug: Redirect all debugging output to stderr instead of
stdout
* synapticsmst: Adjust panamera ESM update routine for some
reported issues
* fu-engine: Optionally wait for replug before updating a device
* fu-device-list: Use delayed device removal when removing the
tree
* thunderbolt: Use replugging from the daemon
* Add support for devices to show an estimated flash time
* Marked some CL options for translation
* ci: Run clang static analysis for Ubuntu build rather than just
clang compiler
* nvme: Initialize the buffer before reading the contents
* contrib: Add a standalone installer creation script
* rts54hid: Add support for Realtek USB devices using vendor HID
commands
* fu-engine: Don't show devices pending a reboot in GetUpgrades
* Add FuMutex helper to make various parts of the daemon
thread-safe
* rts54hub: Add support for Realtek USB devices using vendor HUB
commands
* uefi: Check the amount of free space on the ESP
* fu-tool: Import debugging options from fu-debug like fu-main
* superio: Set the physical and logical IDs
- Add pkgconfig(xmlb) BuildRequires: New dependency.
* Tue Dec 11 2018 glin@suse.com
- Add pesign-obs-integration to BuildRequires and add fwupd*.efi to
BRP_PESIGN_FILES to get it signed
- Add LC_IMAGES and use efivar only if %{with efi_fw_update}
+ Also update the version requirement of efivar
- Disable Redfish and NVME plugins if %{without efi_fw_update}
since those two plugins require efivar
- Remove fwup from BuildRequires since fwupdate is already merged
into fwupd.
* Mon Dec 10 2018 schwab@suse.de
- Use gnu-efi only if %{with efi_fw_update}, always use pkgconfig(efivar)
- Fix file list
* Thu Dec 06 2018 glin@suse.com
- Amend %post and %postun to install/uninstall fwupd*.efi to the
EFI system partition
+ Also add shim to Requires for fwupdx64.efi
- Mark fwupdate as obsolete
+ fwupdate has been merged into fwupd since fwupd 1.1.0.
* Mon Nov 12 2018 ndas@suse.de
- fwupd is require for thunderbolt firmware update in SLE15-SP1(fate#322681)
* Thu Sep 13 2018 nico.kruber@gmail.com
- Update to version 1.1.2:
+ New Features:
- Add a new device flag "ignore-validation" that will override checks
- Add a new plugin to enumerate EC firmware
- Add a new plugin to update NVMe hardware
- Add a plugin for updating using the flashrom command line tool
- Allow the device list to take care of waiting for the device replug
- Allow updating just one specific device from the command line
- Allow upgrades using a self-signed fwupd.efi binary
- Download firmware if the user specifies a URI
- Include serial number in daemon device output when trusted
- Notify all plugins of device removals through a new vfunc
- Use boltd force power API if available
+ Bugfixes:
- Add an install hook for classic snap
- Allow forcing installation even if no AC power is applied
- Allow using --force to ignore version_lowest
- Always use the same HardwareIDs as Windows
- Check the device state before assuming a fake DFU runtime
- Copy over parent GUIDs from other plugin donors
- Detect location of python3 interpreter
- Do not add udev devices after a small delay
- Don't fail to run if compiled without GPG/PKCS7
- Fix a segfault in fwupdtool caused by cleanup of USB plugins
- Implement the systemd recommendations for offline updates
- Improve performance when reading keys from the quirk database
- Remove children of devices when the parent is removed
- Rewrite synapticsmst to use modern error handling
- Rewrite the unifying plugin to use the new daemon-provided functionality
- Show a time estimate on the progressbar after an update has started
* Mon Sep 10 2018 jengelh@inai.de
- Use noun phrase for summary. Trim request for comments from
description.
* Fri Sep 07 2018 nico.kruber@gmail.com
- Update to version 1.1.1:
+ New Features:
- Add support for the Synaptics Panamera hardware
- Add validation for Alpine and Titan Ridge
- Improve the Redfish plugin to actually work with real hardware
+ Bugfixes:
- Allow different plugins to add the same device
- Allow flashing unifying devices in recovery mode
- Allow running synapticsmst on non-Dell hardware
- Check the ESP for sanity at at startup
- Do not hold hidraw devices open forever
- Don't override _FORTIFY_SOURCE when building the EFI binary
- Don't show passwords in fwupdmgr
- Fix a potential segfault in smbios data parsing
- Fix encoding the GUID into the capsule EFI variable
- Fix various bugs when reading the thunderbolt version number
- Reboot synapticsmst devices at the end of flash cycle
- Show status messages when the daemon is initializing
- Show the correct title when updating devices
- Show the reasons that plugins are not run on the CLI
- Use localedir in po/make-images
* Wed Jul 25 2018 tchvatal@suse.com
- Run %udev_rules_update in post as package install udev rules
* Thu Jul 12 2018 oliver@getspam.de
- Update to version 1.1.0: (FATE#326702)
+ New Features:
- Add a initial Redfish support
- Add a tool to mimic the original fwupdate CLI interface
- Allow devices to assign a plugin from the quirk subsystem
- Change the quirk file structure to be more efficient
- Merge fwupdate functionality into fwupd
- Run a plugin vfunc before and after all the composite devices are updated
- Support more Wacom tablets
+ Bugfixes:
- Add release information for locked devices
- Allow building with older meson
- Detect the EFI system partition location at runtime
- Do not use 8bitdo bootloader commands after a successful flash
- Enable accesing downloaded files in flatpak and snap
- Fix a potential buffer overflow when applying a DFU patch
- Fix downgrading older releases to devices
- Fix flashing devices that require a manual replug
- Fix several small memory leaks in various places
- Fix the retrieval of Redfish version
- Fix unifying failure to detach when using a slow host controller
- Set the Wacom device status when erasing and writing firmware
- Show errors in the CLI if unable to access directory
- Use the parent device name for Wacom sub-modules
- Removed enable_pkcs7_when_testing_only.patch
* Wed Jul 11 2018 oliver@getspam.de
- Update to version 1.0.8:
+ New Features (including version 1.0.7):
- Add an plugin to update some future Wacom tablets
- Add 'fwupdmgr get-topology' to show logical device tree
- Add support for creating a flatpak
- Add support for creating a snap
- Add support for Motorola S-record files
- Add the Linux Foundation public GPG keys for firmware and metadata
- Show a translated warning when the server is limiting downloads
- Add enable-remote and disable-remote commands to fwupdmgr
- Add fu_plugin_add_compile_version() for libraries to use
- Allow requiring specific versions of libraries for firmware updates
- If no remotes are enabled try to enable the LVFS
- Show a warning with interactive prompt when enabling a remote
+ Bugfixes (including version 1.0.7):
- Add a firmware diagnostic tool called fwupdtool
- Adjust all licensing to LGPL 2.1+
- Allow installing more than one firmware using 'fwupdmgr install'
- Allow specifying hwids with OR relationships
- Do not call fu_plugin_init() on blacklisted plugins
- Do not require libcolorhug to build
- Fix a crash in libfwupd where no device ID is set
- Fix a potential DoS in libdfu by limiting holes to 1MiB
- Fix a segfault that sometimes occurs during cleanup of USB plugins
- Fix Hardware-ID{0,1,2,12} compatibility with Microsoft
- Hide devices that aren't updatable by default in fwupdmgr
- Search all UEFI GUIDs when matching hardware
- Stop matching Nintendo Switch Pro in the 8bitdo plugin
- Check that EFI system partition is mounted before update
- Disable synapticsmst remote control on failure
- Don't recoldplug thunderbolt to fix a flashing failure
- Fix SQL error when running 'fwupdmgr clear-offline'
- Improve the update report message
- Only enumerate Dell Docks if the type is known
- Only run certtool if a new enough gnutls is present
- Prevent a client crash if the daemon somehow sends invalid data
- Reboot after scheduling using logind not systemd
- Use the right encoding for the label in make-images
- Added/backported enable_pkcs7_when_testing_only.patch:
+ needed to disable pkcs7 test during build (can be removed for
fwupd >= 1.0.9)
* Wed Apr 04 2018 dimstar@opensuse.org
- Update hasbang in installed files from /usr/bin/env python3 to
/usr/bin/python3.
* Tue Apr 03 2018 mpluskal@suse.com
- Update url
- Small packaging cleanup with spec-cleaner
* Fri Mar 23 2018 antoine.belvire@opensuse.org
- Update to version 1.0.6:
+ New Features:
- Add bash completion for fwupdmgr.
- Add support for newest Thunderbolt chips.
- Allow all functions that take device arguments to be
prompted.
- Allow devices to use the runtime version when in bootloader
mode.
- Allow overriding ESP mount point via conf file.
- Delete any old fwupdate capsules and efivars when launching
fwupd.
- Generate Vala bindings.
+ Bugfixes:
- Allow ctrl-d out of the prompt for devices.
- Allow to create package out of provided binary.
- Correct handling of unknown Thunderbolt devices.
- Correctly detect new remotes that are manually copied.
- Fix a crash related to when passing device to downgrade in
CLI.
- Fix running the self tests when no fwupd is installed.
- Fix Unifying signature writing and parsing for Texas
bootloader.
- Only send success and failure reports to the server.
- Use a CNAME to redirect to the correct CDN for metadata.
- Use a longer timeout when powering back the Thunderbolt
device.
* Thu Mar 15 2018 fcrozat@suse.com
- Ensure library package has a dependency on main package,
otherwise it won't be usable.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.5:
+ New Features:
- Offer to reboot when processing an offline update.
- Report the efivar, libsmbios and fwupdate library versions.
- Report Thunderbolt safe mode and SecureBoot status.
- Show the user a URL when they report a known problem.
- Support split cabinet archives as produced by Windows Update.
+ Bugfixes:
- Be more careful deleting and modifying device history.
- Clarify which devices don't have upgrades.
- Ensure the Thunderbolt version is xx.yy.
- Fix a daemon warning when using fwupdmgr get-results.
- Fix crasher with MST flashing.
- Fix DFU detach with newer releases of libusb.
- Include the device VID and PID when generating the device-id.
- Set the RemoteId when using GetDetails.
- Stop matching 8bitdo DS4 controller VID/PID.
- Use help2man for dfu-tool and drop docbook dependencies.
- Use ngettext for any strings with plurals.
- Use the default value if ArchiveSizeMax is unspecified.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.4:
+ New Features:
- Add D-Bus methods to get and modify the history information.
- Allow the user to share firmware update success or failure.
- Ask the user to refresh metadata when it is very old.
- Store firmware update success and failure to a local
database.
+ Bugfixes:
- Add a device name for locked UEFI devices.
- Allow each plugin to opt-in to the recoldplug action.
- Fix firmware downloading using gnome-software.
- Fix UX capsule reference to the one specified in efivar.
- Never add two devices to the daemon with the same ID.
- Rescan supported flags when refreshing metadata.
- Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.3:
+ New Features:
- Add a new plugin to add support for CSR "Driverless DFU".
- Add initial SF30/SN30 Pro support.
- Support AppStream metadata with relative <location> URLs.
+ Bugfixes:
- Add more metadata to the user-agent string.
- Block owned Dell TPM updates.
- Choose the correct component from provides matches using
requirements.
- Do not try to parse huge compressed archive files.
- Fix a double-free bug in the Udev code.
- Handle Thunderbolt "native" mode.
- Use the new functionality in libgcab >= 1.0 to avoid writing
temp files.
* Thu Dec 21 2017 stefan.bruens@rwth-aachen.de
- Unbreak compilation on non-x86, upstream renamed options to disable
plugins.
* Tue Dec 19 2017 fcrozat@suse.com
- Update to version 1.0.2:
+ Add a plugin for the Nitrokey Storage device
+ Add support for the original AVR DFU protocol
+ Allow different plugins to claim the same device
+ Allow quirks to set common USB properties
+ Move a common plugin functionality out to a new shared object
+ Optionally delay the device removal for better replugging
+ Set environment variables to allow easy per-plugin debugging
+ Use a SHA1 hash for the internal DeviceID
+ Add quirk for AT32UC3B1256 as used in the RubberDucky
+ Disable the dell plugin if libsmbios fails
+ Don't register for USB UDev events to later ignore them
+ Fix a possible buffer overflow when debugging ebitdo devices
+ Fix critical warning when more than one remote fails to load
+ Fix DFU attaching AVR32 devices like the XMEGA
+ Ignore useless Thunderbolt device types
+ Refactor ColorHug into a much more modern plugin
+ Release the Steelseries interface if getting the version failed
+ Remove autoconf-isms from the meson configure options
+ Show a nicer error message if the requirement fails
+ Sort the output of GetUpgrades correctly
- Changes from version 1.0.1:
+ Add support for HWID requirements
+ Add support for programming various AVR32 and XMEGA parts using DFU
+ Add the various DFU quirks for the Jabra Speak devices
+ Allow specifying the output file type for 'dfu-tool read'
+ Move the database of supported devices out into runtime loaded files
+ Support the IHEX record type 0x05
+ Use help2man to generate the man page at build time
+ Use the new quirk infrastructure for version numbers
+ Catch invalid Dell dock component requests
+ Correctly output Intel HEX files with > 16bit offset addresses
+ Do not try to verify the element write if upload is unsupported
+ Fix a double-unref when updating any 8Bitdo device
+ Fix crash when enumerating with Dell dock connected but with no UEFI
+ Fix uploading large firmware files over DFU
+ Format the BCD USB revision numbers correctly
+ Guess the DFU transfer size if it is not specified
+ Include the reset timeout as wValue to fix some DFU bootloaders
+ Make the error message clearer when sans fonts are missing
+ Support devices with truncated DFU interface data
+ Use the correct remote-specified username and passord when using fwupdmgr
+ Use the correct wDetachTimeOut when writing DFU firmware
+ Verify devices with legacy VIDs are actually 8Bitdo controllers
- Add help2man as BuildRequires.
* Thu Dec 14 2017 stefan.bruens@rwth-aachen.de
- Fix dependencies and build options for non-x86 architectures. At
least FW updates for USB are arch independent, and EFI FW updates
can also be applied on Aarch64.
* Fri Oct 27 2017 dimstar@opensuse.org
- Update to version 1.0.0:
* Add the plugin documentation to the main gtk-doc
* Add a waiting-for-auth daemon state
* Add fwupd_remote_get_checksum() to use in client programs
* Generate the LD script from the GObject Introspection data
* Prevent fwupd from mounting filesystems
* uefi: Do not use system-specific infomation for PCI devices
* uefi: Support uploading the firmware splash image
* dell: only set coldplug delay when we know we need it
* dell: only run SMI to toggle host MST GPIO on systems with host MST
* dell: add functionality to blacklist HW with problems
* dell: only run on intended chassis
* thunderbolt-power: always run after thunderbolt plugin
* Allow plugins to depend on each other
* Add support for SMBIOSv3
* dell: prefer to use hwids to get DMI keys and DE table
* debian: remove /etc/fwupd.conf on upgrade
* unifying: Use fu_plugin_check_supported()
* Add fu_plugin_check_supported()
* unifying: Use a device whitelist to avoid breaking devices
* Fix various printing issues with the progressbar
* dell: Fix a trivial whitespace issue
* Do not fail to load the daemon if cached metadata is invalid
* Do not store the newest release as part of the FuDevice object
* Add a method to return a list of upgrades for a specific device
* Move the downgrade calculation to the daemon
* Make FuDevice derive from FwupdDevice rather than FwupdResult
* Add a command 'clear-offline' to fwupdmgr
* Merge releases where multiple remotes provide the same firmware
* Remove the UniqueID property
* uefi: Do not set the release version
* udev: Do not match USB devices, even with a GUID set
* Use the intel-wmi-thunderbolt kernel module to force power
* dell: drop thunderbolt force power code
* unifying: Add hardcoded summaries for peripheral kinds
* Create CODE_OF_CONDUCT.md
* Ensure more devices set the device summary
* Add an 'Summary' property to each device
* Add a human-readable title for each remote
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Move deprecated symbols to a new header
* Introduce an s390x cross compile target to CI
* Add ModifyRemote as an easy way to enable and disable remotes like the LVFS
* Do not auto-open all USB devices at startup
* dfu: Use FuDeviceLocker
* unifying: Use FuDeviceLocker
* colorhug: Use FuDeviceLocker
* ebitdo: Use FuDeviceLocker
* altos: Use FuDeviceLocker
* steelseries: Use FuDeviceLocker
* usb: Use FuDeviceLocker
* Add FuDeviceLocker to simplify device open/close lifecycles
* dfu: Remove DEVO support
* dfu: Remove the now-unused symtab support
* Remove the ELF support from libdfu and move the code to the altos plugin
* Use -Werror when building in Travis CI
* Do not install the libdfu helper library
* Parse the SMBIOS DMI table directly
* usb: Disable the fallback USB plugin
* Test for missing language translations at build time
* Fix the libdfu self test failure on s390 and ppc64
* Fri Oct 27 2017 dimstar@opensuse.org
- Update to version 0.9.8:
* Add a command 'clear-offline' to fwupdmgr
* Do not fail to load the daemon if cached metadata is invalid
* Fix a crash when using fu_plugin_device_add_delay()
* Fix the libdfu self test failure on s390 and ppc64
* Format the BCD USB revision numbers correctly
* Never fallback to an offline update from client code
* Prevent fwupd from mounting filesystems
* dfu: Allow flashing when the target does not specify an
alt-name
* dfu: Do not try to verify the element write if upload is
unsupported
* dfu: Fix uploading large firmware files
* dfu: Include the reset timeout as wValue to fix some hardware
* dfu: Set the vendor ID to the runtime USB VID
* dfu: Use 0x0101 as an alias for 0x0110
* thunderbolt: move test for mock environment
(gh#hughsie/fwupd#280)
* udev: Do not match USB devices, even with a GUID set
* uefi: Do not set the release version
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Tue Sep 19 2017 dimstar@opensuse.org
- Update to version 0.9.7:
+ 10 months worth of bugfixing, integrating more vendor specific
Firmware update paths.
* Thu Mar 02 2017 dimstar@opensuse.org
- Update to version 0.8.1:
+ Delete duplicate translations (gh#hughsie/fwupd#89).
+ Do not hardcode docbook2man path.
+ Fix fwupdmgr timeout with missing pending database.
+ Fix compiler warnings.
+ Fix a crash when enumerating devices on a Dell WLD15.
+ dell: don't initialize libsmbios on unsupported systems.
+ Do not fail to start on Dell hardware.
+ Adjust systemd confinement restrictions.
+ Do not dlclose modules when running under valgrind.
+ Really remove the NoNewPrivileges systemd confinement.
+ Release fwupd 0.8.1.
* Mon Feb 27 2017 mpluskal@suse.com
- Update to version 0.8.0:
+ Show a different error when checking for updates while on
+ battery power (gh#hughsie/fwupd#68).
+ Clarify the test in --help and man page related to offline
+ (gh#hughsie/fwupd#69).
+ libdfu: Use a heuristic for the start address if the firmware
+ has no DfuSe footer.
+ dell: Don't return the address of a stack variable.
+ dell: Fix a possibly-impossible-to-hit buffer overrun.
+ close USB devices before error returns (gh#hughsie/fwupd#73).
+ Make libelf support optional.
+ Always make sure we're getting a C99 compiler.
+ Fix redeclaration of polkit autocleanup functions.
+ Uncomment SystemdService parameter in the dbus service file
+ (gh#hughsie/fwupd#74).
+ Make all providers and plugins share a GUsbContext.
+ Unexport libebitdo.
+ Move the plugins into plugin-specific directories.
+ Convert the providers to plugins to simplify code and for
+ future features.
+ Add support for Logitech Unifying devices.
+ Add a set of vfuncs that are run before and after a device
+ update.
+ Return the pending UEFI update when not on AC power.
+ Move the UPower functionality to a plugin.
+ Fix udev plugin loading.
+ fix dfu plugin loading.
+ Disable PrivateNetwork on systemd service.
+ Use more restrictive settings when running under systemd.
+ dell: add a new method for forcing a controller to flash mode.
+ Add VerifyUpdate to update the device checksums server-side.
+ Move the Option ROM parsing to the Udev plugin.
+ Move the device add delay to shared code.
+ Add initial skeleton for Intel Thunderbolt support.
+ unifying: Use the actual bootloader VID/PIDs when in firmware
+ mode.
+ Allow the metadata to match a version of fwupd and the existing
+ fw version.
+ Add fwupd_result_get_device_version_bootloader().
+ Fix the appstream-glib version guards.
+ dell: Add coldplug methods to let other plugins turn on
+ TBT/GPIO.
+ libdfu: Don't read data from some DfuSe targets.
+ Add the ability to run a prepare->exec->cleanup on coldplug.
+ Allow plugins to request that all plugins re-coldplug.
+ thunderbolt: Detecting new devices and add an actual device to
+ the daemon.
+ Add support for flashing the ChaosKey.
+ thunderbolt: add some guards around empty arrays.
+ dell: Adjust the coldplug preparation and cleanup sequence.
+ dell: Fix possible linker problem.
+ Revert "thunderbolt: add some guards around empty arrays".
+ Add fu_plugin_set_coldplug_delay() to allow hardware to
+ initialize if required.
+ altos: Add error checking when using termios.
+ ebitdo: Subclass FuDevice like the altos plugin.
+ altos: Set the flags in the init_real so they work for the
+ cmdline tool.
+ unifying: Subclass FuDevice like the altos plugin.
+ Include all debug messages when run with --verbose.
+ dell: introduce a standalone (noinst) tool to force mode
+ flashes.
+ Introduce plugin for Synaptics MST hubs.
+ synapticsmst: Add cascade support.
+ Only register the D-Bus service when all devices have been
+ added.
+ synapticsmst: Refactor away the global state.
+ synapticsmst: fix cascade support in the plugin.
+ Updates for thunderbolt plugin.
+ thunderbolt: Add special handling for safe mode on Dell systems
+ (gh#hughsie/fwupd#84).
+ synapticsmst: Iterate all nodes rather than hardcoding to 3.
+ synapticsmst: build GUID using dock type.
+ Add a new function fu_dell_supported to fu-dell-common.
+ synapticsmst: add a test suite.
+ synapticsmst: Fix up some trivial whitespace issues.
+ Fix a refcounting issue in the udev plugin.
- Add rpmlintrc untill security review is resolved
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.5:
+ Clean up PO files
+ Verify devices support updating in mode they are called.
+ Fix an assert when unlocking the dummy ESRT device
+ Don't create the UEFI dummy device if the unlock will happen on
+ next boot
+ dell: Match on TB16 as well
+ Fix a -fstack-protector-strong crash when uploading firmware
+ Enable the stack protection in local builds
+ dell: If running in test suite, don't try to get product ID
+ from sysfs
+ libfdfu: Show a warning when getting the alt-name failed
+ dfu: Fix listing devices using the ST reference bootloader
+ Show the nicely formatted target name for DfuSe devices
+ libdfu: Fix two possible critical warnings for corrupt USB
+ descriptors
+ libdfu: Correctly offset addresses when one zone has multiple
+ sectors
+ libdfu: Do not do GetStatus on dfuse upload
+ libdfu: Fix uploading from DfuSe devices
+ libdfu: Use the device offset when writing DfuSe firmware
+ libdfu: Add DfuAction enumerated value to represent a device
+ action
+ libdfu: Use an animated progress bar when performing DFU
+ operations
+ libdfu: Do not do a zero-byte download when in DfuSe mode
+ libdfu: Fix verification of written DfuSe firmware
+ libdfu: Ensure the device is open before claiming the interface
+ libdfu: Ensure the mode is set correctly when faking a runtime
+ libdfu: Re-get the quirks when the DfuDevice gets a new
+ GUsbDevice
+ libdfu: Add quirks for HydraBus as it does not have a DFU
+ runtime
+ libdfu: Match the device booloader or runtime VID and PID when
+ checking firmware
+ Add a 'replace-data' command to dfu-tool
+ string
+ libdfu: Add dfu_sector_get_zone() to get the continuous memory
+ zone number
+ libdfu: Wait for DNBUSY to be cleared when checking the DfuSe
+ status
+ libdfu: Correctly erase DfuSe devices
+ Enable hardening flags on more binaries
+ libdfu: Correctly set the element address when uploading from
+ DfuSe devices
- Add pkgconfig(gmodule-2.0) BuildRequires: Align with what
+ configure checks for.
- Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios.
+ Unfortunatly, until we have fwup packaged and enabled, this will
+ not work.
- Add disabled pkgconfig(libtbtfwu): For future thunderbolt
+ support.
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.4:
+ Add a fallback for older appstream-glib releases
+ Write the ELF files with the correct section type
+ Fix libfwupd self tests when a host-provided fwupd is not
+ available
+ Add dfu_firmware_add_symbol()
+ Add the Altos symbol table to the DfuFirmware
+ Use the symtab to set the VID/PID from Altos IHEX firmware
+ images
+ Show the human-readable version in the 'dfu-tool dump' output
+ Allow specifying the argument to 'dfu-tool set-release' in
+ major.minor format.
+ sections
+ Support writing the IHEX symbol table
+ call
+ Load the symbol table from ELF firmware
+ Load the Altos USB descriptor from ELF files
+ Add DFU_CIPHER_KIND_RSA
+ Fix a possible crash when uploading firmware files using libdfu
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.3:
+ build: Fix gtk-doc build when srcdir != builddir
+ In get-details output, display the blob filename
+ Ensure the update ID is set when getting local firmware details
+ Use a private gnupg key store
+ Add support for installing against multiple devices from a CAB
+ file
+ Use the correct firmware blob when installing a composite
+ device update
+ in get-details output, display update_name rather than Unknown
+ Device
+ statements
+ Don't make failures critical while checking versions or locked
+ state
+ Show a more detailed error when installing firmware on the
+ wildcard
+ Add Dell TPM and TB15/WD15 support via new Dell provider.
+ file
+ Allow blacklisting devices by their GUID
+ header file
+ Add XPS 9250 to Dell TPM modeswitch blacklist
+ Only display flashes left in results output when it gets low.
+ Add a small library for talking with 0bitdo hardware
+ Add another compile warning and fix up any build failures
+ Embed fwupd version in generated libfwupd and libdfu
+ documentation
+ Update fwupdmgr manpage for new commands and arguments
+ build: Fix gtk-doc build when srcdir != builddir
+ online not offline
+ Get the firmware version correctly from 0Bitdo gamepads
+ Switch to the Amazon S3 CDN for firmware metadata
+ Fix writing 8Bitdo device firmware
+ be updated
+ Show the vendor flashing instructions when installing
+ Split out the DFU file formats to separate files
+ Add fwupd_result_remove_device_flag()
+ Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER
+ get-updates output
+ Allow providers to export percentage completion
+ Add fwupd_client_get_status()
+ Handle the 8Bitdo bootloader in a better way
+ Show a progress notification when installing firmware
+ Add fwupd_result_get_unique_id()
+ Use the SHA1 hash of the local file data as the component
+ origin
+ Use the correct define prefix for FwupdDeviceFlags
+ libdfu: Fix hang when parsing corrupt IHEX files
+ Add a set-target-size command to dfu-tool
+ Support the 'DEVO' cipher kind in libdfu
+ Add a set-address command to dfu-util
+ Disable the Dell specific code by default
+ Conditionally enable all providers based upon what's installed
+ Add a summary of providers that are enabled from configure
+ Do not use the deprecated GNOME_COMPILE_WARNINGS
+ Ignore devices that do not add at least one GUID
+ Do not attempt to add DFU devices not in runtime mode
+ Save the unique ID in the pending database
+ libdfu: Add initial ELF reading and writing support
+ Add dfu_firmware_format_from_string()
+ Normalize the DfuFirmwareFormat enums
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.2:
+ Allow devices to have multiple assigned GUIDs
+ Only return updatable devices from GetDevices()
+ Add fu_device_get_alternate()
+ Allow metainfo files to match only specific revisions of
+ devices
+ Re-read flags for a device after a provider's unlock routine is
+ done
+ Test for a locked device when trying to install firmware update
+ Enforce allowing providers to take away flash abilities
+ Support returning multiple GUIDs from GetDetails
+ Add a GetDetailsLocal() method to eventually replace
+ GetDetails()
+ break
+ libdfu: Add DfuVersion enumerated values
+ libdfu: Show the DFU protocol version in 'dfu-tool list'
+ Only claim the DFU interface when required
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.1:
+ Fix libdfu CRC check for big endian architectures
+ Add dfu_image_get_element_default()
+ Fix libdfu CRC check for big endian architectures
+ Fix big endian issues when reading and writing DFU and DfuSe
+ files
+ Remove non-interactive pinentry setting from fu-keyring
+ Set the system's DMI product name as the DisplayName for UEFI
+ Re-order output of get-devices to be easier to read
+ Make the device display name nicer
+ update version
+ Return all update descriptions newer than the installed version
+ Add summary and name field for Rival SteelSeries
+ Fix a critical warning when restarting the daemon
+ Add a 'supported' flag to the FuDevice
+ Add fwupd_client_connect()
+ Add a 'monitor' debugging command for fwupdmgr
+ Add device-added, device-removed and device-changed signals
+ Match the AppStream metadata after a device has been adedd
+ Re-match devices when the AppStream metadata is updated
+ Show 'Unknow Device' in fwupdmgr when a device name is not set
+ Set the device description when parsing local firmware files
+ Add support for a new device field "Flashes Left".
+ src/Makefile.am: reshuffle so enableable bits are only
+ referenced when on
+ Add support for a --force flag to override provider warnings
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.0:
+ Use g_usb_context_wait_for_replug()
+ Run vendor plugins as required
+ Add a plugin for SteelSeries hardware
+ Add fwupd_device_flag_to_string()
+ Return the device flags when getting firmware details
+ Show device flags in 'fwupdmgr get-devices'
+ Add fwupd_trust_flag_to_string()
+ Export FwupdUpdateState in libfwupd
+ Export FwupdUpdateFlags in libfwupd
+ Add FwupdResult to libfwupd
+ Add a self test framework for libfwupd
+ Add FwupdClient to libfwupd
+ Use FwupdClient from libfwupd in fwupdmgr
+ Use libfwupd inside the daemon
+ Emit a FwupdClient::changed when the daemon emits this signal
+ Rename some of the new libfwupd API to align with the D-Bus
+ names
+ libdfu: Fix up some NULL/FALSE confusion
+ libfwup: Fix up some NULL/FALSE confusion
+ FwupdClient
+ Allow other checksum kinds in FwupdResult
+ Allow SHA-256 hashes when verifying
+ Show the checksum kind in the fwupdmgr output
+ Add Alienware to the version quirk table
+ Do not use /tmp for downloaded files
+ Add fwupd_result_has_device_flag()
+ Do not return updates that require AC when on battery
+ Connect to UPower at startup
+ Test that GPG key import actually was successful (or didn't
+ change a key already in the keyring)
+ Use g_auto() in FuKeyring
+ Return errors of the correct type when using libfwupd
+ Allow overridding the location of the pending database for
+ test suite
+ Allow overriding the location of the provider offline files for
+ test suite
+ Validate that the dbus system bus is available before running
+ libfwupd tests
+ Update README.md for changes that have happened in the project
+ Add some basic explanation of how to use fwupd with various
+ frontends
+ Split out the libdfu-devel package
+ Revert "Allow overridding the location of the pending database
+ for test suite"
+ Revert "Allow overriding the location of the provider offline
+ files for test suite"
+ Allow the test suite to run in %check
+ Generate gtk-doc documentation for libfwupd
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.3:
+ Require AC power before scheduling some types of firmware
+ update
+ Install the hardcoded firmware AppStream file
+ Correct the BCD version number for DFU 1.1
+ Add an unlock method for devices
+ Add ESRT enable method into UEFI provider.
+ Only read PCI OptionROM firmware when devices are manually
+ unlocked
+ Do not use deprecated API from libappstream-glib
+ Ignore the DFU runtime on the DW1820A
+ Export the attribute and quirk values in libdfu
+ Show ignored DFU devices in dfu-util, but not in fwupd
+ Allow defining update vfuncs with no runtime support
+ Revert "Allow defining update vfuncs with no runtime support"
+ Add a simple plugin infrastructure
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.2:
+ Add 'Created' and 'Modified' properties on managed devices
+ Fix get-results for UEFI provider.
+ Support vendor-specific UEFI version encodings
+ Move quirks directly into a single table and file.
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.1:
+ Only dump the profiling data when run with --verbose
+ Always persist ColorHug devices after replug
+ Do not misdetect different ColorHug devices
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.6.0:
+ Add support for updating USB devices with DFU
+ libdfu: Add support for DfuSe firmware
+ libdfu: Generate gtk-doc documentation
+ libdfu: Don't rely on specific hardware to be present
+ libdfu: Move the VID:PID checks from the tool to DfuDevice
+ libdfu: Use a custom error domain
+ Use the same device identification string format as Microsoft
+ libdfu: Fix crash when setting a target size
+ libdfu: Allow setting the alternate settings in DfuSe firmware
+ libdfu: Add a merge command to dfu-tool
+ libdfu: Allow choosing a different alt-setting when downloading
+ libdfu: Fix a crash when setting a NULL image name
+ libdfu: Correctly implement auto-boot in dfu_device_download()
+ libdfu: Check for extra args to dfu-tool convert
+ libdfu: Call the progress callback when doing detach
+ Ignore the DFU device detach:attach when verifying
+ libdfu: Require a --force flag to flash wildcard firmware
+ Use new API available in fwup 0.5
+ libdfu: Make the element address 32 bits in size
+ libdfu: Support the ST-specific bitCanAccelerate
+ libdfu: Only do a Detach notification if we're actually doing
to do it
+ libdfu: Use the progress bar for all uploads and downloads
+ libdfu: Improve the output of 'dfu-util list'
+ libdfu: Support download and upload to ST DfuSe devices
+ libdfu: Fix multi-interface devices like the Neo Freerunner
+ libdfu: Add a pkgconfig file
+ libdfu: Use signals to propagate device state
+ libdfu: Add a context object to handle device hotplug
+ libdfu: Add an example showing GObject Introspection
+ libdfu: Do not ref DfuDevice in DfuTarget so the auto-close
+ logic works
+ Close DFU devices as soon as possible after the transfer has
completed
+ Emit the changed signal after doing an update
+ Rescan the DFU device after replug to get the new version
+ libdfu: Add dfu_context_get_device_by_platform_id()
+ libdfu: Add dfu_device_get_runtime_release()
+ libdfu: Add dfu_device_get_display_name()
+ libdfu: Fix self tests after recent API change
+ Split out the DFU provider as a new file
+ libdfu: Copy the platform ID and invalidate the GUsbDevice when
removed
+ libdfu: Accept multiple spaces after the DfuSe sector name
+ libdfu: Verify the GUsbDevice is set before using it
+ libdfu: Remove the weak pointer when destroying the DfuTarget
+ libdfu: Fix dfu_device_wait_for_replug() so it can work with a
DfuContext
+ Export the AppStream ID when returning device results
+ Rescan the DFU device after firmware has been updated
+ libdfu: Handle cancellation with ctrl+c in dfu-tool
+ libdfu: Add a quirk to support DFU runtime-less devices
+ libdfu: Add an explicit 'attach' method
+ libdfu: Add dfu_firmware_get_image_by_name()
+ libdfu: Make reading and writing to targets easier to
+ understand
+ Fix compile with --disable-shared
+ libdfu: Display all the files shown with 'dfu-tool dump'
+ libdfu: Fix a few crashers found using afl
+ libdfu: Fix another bug discovered by the fuzzer
+ libdfu: Add commands to encrypt and decrypt firmware images
+ libdfu: Show better device errors
+ libdfu: Add DfuCipher which is a property on a target and a
+ firmware file
+ libdfu: Add support for the draft 'DFU Metadata Table
+ Specification'
+ libdfu: Only enumerate the DfuContext when required
+ libdfu: Fix several reported crashes in the inhex32 import code
+ Release fwupd 0.6.0
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.4:
+ Fix compile error against fwupdate git due to dropped
+ functions.
+ Use strerror() when printing errors from libfwupdate
+ Use new API available in fwup 0.5
+ Release fwupd 0.5.4
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.3:
+ Avoid seeking when reading the file magic during refresh
+ Do not assume that the compressed XML data will be NUL
+ terminated
+ debugging
+ Use the correct user agent string for fwupdmgr
+ Release fwupd 0.5.3
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.2:
+ Ensure D-Bus remote errors are registered at fwupdmgr startup
+ Show the dotted-decimal representation of the UEFI version
+ number
+ require appstream-glib 0.5.1
+ not found
+ When the version is from the 'FW' extension do not cache the
+ device
+ Support cabinet archives files with more than one firmware
+ Add the update description to the GetDetails results
+ Add profiling data to debug slow startup times
+ Fix verify-update to produce components with the correct
+ provide values
+ Clear the in-memory firmware store only after parsing a valid
+ XML file
+ Release fwupd 0.5.2
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.1:
+ Fix the error message when no devices can be updated
+ offline update: Use glib api for for reading symlinks
+ Release fwupd 0.5.1
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.0:
+ Do not merge the existing firmware metadata with the submitted
+ files
+ Raise the dep on GLib to support and use g_autoptr()
+ Do not reboot if racing with the PackageKit offline update
+ mechanism
+ Release fwupd 0.5.0
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.6:
+ Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd
+ instead.
+ Use the new secure metadata URI
+ Update the offline update service to invoke right command
+ Don't apply firmware if something else is processing the
+ offline update
+ Remove fwsignd, we have the LVFS now
+ Depend on appstream-glib >= 0.5.0
+ Add application metadata when getting the updates list
+ Simplify the version properties on devices to avoid complexity
+ and bugs
+ Release fwupd 0.1.6
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.5:
+ Allow fwupd to be autostarted by systemd
+ Sign the test binary with the correct key
+ Do not pre-convert the update description from AppStream XML
+ Devices with option ROM are always internal
+ Prefer the GUID from the firmware than the device
+ Allow no arguments to 'fwupdmgr verify-update' and use sane
+ defaults
+ Add the ability to remove a vendor on the LVFS site
+ Fix validation of written firmware
+ Move the verification and metadata matching phase to the daemon
+ Add a simple config file to store the correct LVFS download URI
+ Make parsing the option ROM runtime optional
+ Add a Raspberry Pi firmware provider
+ Use the AppStream 0.9 firmware specification by default
+ Generate the ColorHug test files at runtime
+ Release fwupd 0.1.5
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.4:
+ man/Makefile.am: Add --sgml to docbook2man invocation
+ Make statements about storing private keys stronger.
+ Provide a way for clients to add new firmware metadata to the
+ system cache
+ Fix fwupd-offline-update.service
+ Revert "man/Makefile.am: Add --sgml to docbook2man invocation"
+ Add a Udev firmware provider
+ Extract the version string from the ROM in PCI devices
+ Add a 'verify' command that verifies the cryptographic hash of
+ device firmware
+ Make the ROM parsing more robust and add self tests
+ Get the version number out from Intel VBIOS too
+ Provide a way to dump the option ROM using the command line
+ build: gusb is required even without colorhug
+ remove unused variables
+ Do not return NULL as a gboolean
+ Fix Intel VBIOS detection on Dell hardware
+ Do not use the subsystem information when constructing the fake
+ GUID
+ Actually parse the PCI option ROM
+ Accept multiple files at one time when using fwupdmgr dump-rom
+ verify run
+ Add a 'verify-update' command to fwupdmgr
+ Fix trivial bug when parsing firmware versions
+ Keep hitting the hardware until it gives us enough ROM
+ Make the version parsing more resilient to corrupt firmware
+ Fix the example .inf file to reflect reality
+ Fix ROM PPID searching to work for all ROMs
+ Move the LVFS website to the fwupd project
+ Add the ability to create detached signatures
+ Allow cab files to be saved
+ Add a simple signing server that operates on .cab files
+ Automatically download metadata using fwupdmgr if required
+ Don't call efibootmgr after fwupdate.
+ Associate the contact email address directly with the vendor
+ key
+ Use the actual LVFS GPG key
+ Allow running fwsignd as the non-root user
+ metadata
+ Do not merge existing LVFS metadata
+ Do not use the file hash when storing the LVFS submitted
+ firmwares
+ Move GetUpdates to the daemon
+ Change the DBus method for installing firmware to 'Install'
+ Allow installing an offline UEFI update without --offline
+ Add a 'fwupdmgr update' command to update all devices to latest
+ versions
+ 'update' command
+ Increase the size limit of firmware to 50Mb
+ Only sign files when the entire file has been copied
+ Fallback to offline install when calling the update argument.
+ Reload appstream data after refreshing.
+ Release fwupd 0.1.4
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.3:
+ Coldplug the devices before acquiring the well known name
+ Add an UNKNOWN status so we can return meaningful enum values
+ Run the offline actions using systemd when required
+ Get the firmware version from the device descriptors
+ Added syntax highlighting
+ More markup
+ Support OpenHardware devices using the fwupd vendor extensions
+ Move boolean properties on the device to a set of flags
+ Release fwupd 0.1.3
* Wed May 27 2015 dimstar@opensuse.org
- Update to version 0.1.2:
+ More markup
+ Fixed typos and markup for executable
+ Add slovak translation
+ Add helper code to validate public key signatures
+ Decompress any firmware signatures in the .cab file
+ Verify firmware if a detached signature is present
+ Show the firmware trust status when doing GetDetails()
+ Only allow signed firmware to be upgraded without a password
+ Add some guidelines for vendors to README
+ Small grammar fix
+ Extract the .cat file alongside the firmware
+ Release fwupd 0.1.2
* Mon Apr 13 2015 dimstar@opensuse.org
- Update to version fwupd_0_1_1:
+ Do not crash when there are no devices to return
+ Add a 'get-updates' command to fwupdmgr
+ Add and document the offline-update lifecycle
+ Create runtime directories if they do not exist
+ Create a libfwupd shared library
+ Export the status as an enumerated value rather than a string
+ Release fwupd 0.1.1
* Mon Apr 13 2015 dimstar@opensuse.org
- Initial package.
/usr/bin/dfu-tool
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Nov 12 00:24:29 2024