| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: ethtool | Distribution: SUSE Linux Framework One |
| Version: 6.10 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.1 | Build date: Fri Aug 9 15:27:19 2024 |
| Group: Productivity/Networking/Diagnostic | Build host: reproducible |
| Size: 743648 | Source RPM: ethtool-6.10-slfo.1.1.1.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://www.kernel.org/pub/software/network/ethtool/ | |
| Summary: Utility for examining and tuning Ethernet-based network interfaces | |
Ethtool is a small utility for examining and tuning ethernet-based network interfaces. See the man page for more details.
GPL-2.0-only
* Fri Aug 09 2024 mkubecek@suse.cz
- update to upstream release 6.10
* Feature: suport for PoE in PSE (--show-pse and --set-pse)
* Feature: add statistics support to tsinfo (-T)
* Feature: add JSON output to base command (no option)
* Feature: add JSON output to EEE info (--show-eee)
* Fix: qsfp: better handling on page 03h read failure (-m)
* Fix: handle zero arguments for module eeprom dump (-m)
* Fix: check for missing arguments in do_srxfh() (-X)
* Misc: more descriptive error when JSON output is not available
* Thu May 23 2024 mkubecek@suse.cz
- update to upstream release 6.9
* Feature: support for rx-flow-hash gtp (-N)
* Feature: support for RSS input transformation (-X)
* Fix: typo in coalescing output (-c)
* Fix: document all debugging flags in man page
* Sun Jan 28 2024 mkubecek@suse.cz
- update to upstream release 6.7
* Feature: support for setting TCP data split
* Fix: fix new gcc14 warning
* Fix: fix SFF-8472 transceiver module identification (-m)
* Thu Nov 23 2023 mkubecek@suse.cz
- update to upstream release 6.6
* Feature: support for more CMIS transceiver modules (-m)
* Fix: fix build on systems with old kernel uapi headers
* Tue Sep 12 2023 mkubecek@suse.cz
- update to upstream release 6.5
* Feature: register dump for hns3 driver (-d)
* Fix: fix fallback to ioctl for sset (-s)
* Fix: fix empty slot search in rmgr (-N)
* Sat Jul 01 2023 mkubecek@suse.cz
- update to upstream release 6.4
* Feature: get/set Tx push buffer length (-G)
* Feature: sff-8636 and cmis: report LOL / LOS / Tx Fault (-m)
* Fix: fix duplex setting parser (-s)
* Misc: check and require C11 language standard
* Misc: clean up obsolete pre-build checks
* Sat Jul 01 2023 mkubecek@suse.cz
- make ethtool-bash-completion noarch
* Mon May 08 2023 mkubecek@suse.cz
- update to upstream release 6.3
* Feature: PLCA support (--[gs]et-plca-cfg, --get-plca-status)
* Feature: MAC Merge layer support (--show-mm, --set-mm)
* Feature: pass source of statistics for port stats
* Feature: get/set rx push in ringparams (-g and -G)
* Feature: coalesce tx aggregation parameters (-c and -C)
* Feature: PSE and PD devices (--show-pse, --set-pse)
* Fix: minor fixes of help text (--help)
* Fix: fix build on systems with older system headers
* Fix: fix netlink support when PLCA is not present (no option)
* Fix: fixes for issues found with gcc13 -fanalyzer
* Fix: fix return code in rxclass_rule_ins (-N)
* Fix: more robust argc/argv handling
* Fri Mar 03 2023 gmbr3@opensuse.org
- Split bash-completion to separate sub-package
* Tue Feb 21 2023 mkubecek@suse.cz
- update to upstream release 6.2
* Feature: link down event statistics (no option)
* Feature: JSON output for coalesce (-c)
* Feature: new link modes (no option)
* Feature: JSON output for ring (-g)
* Feature: netlink handler for RSS get (-x)
* Fix: fix boolean value output in JSON output
- enforce "-std=c11" on SLE <= 12 where the default is older
* Mon Dec 19 2022 mkubecek@suse.cz
- update to upstream release 6.1
* Feature: update link mode tables
* Feature: register dump for NXP ENETC driver (-d)
* Feature: report TCP header-data split (-g)
* Feature: support new message types in pretty print
* Fix: man page syntax fixes
* Mon Oct 10 2022 mkubecek@suse.cz
- update to upstream release 6.0
* Fix: advertisement modes autoselection by lanes (-s)
* Sun Aug 21 2022 mkubecek@suse.cz
- update to upstream release 5.19
* Feature: get/set tx push (-g and -G)
* Feature: register dump support for TI CPSW
* Feature: register dump support for lan743x chipset
* Fix: fix missing sff-8472 output in netlink path
* Fix: fix EEPROM byte write
* Mon Jun 13 2022 mkubecek@suse.cz
- update to upstream release 5.18
* Feature: get/set cqe size (-g and -G)
* Fix: fix typo in man page
* Fix: fix help text alignment
* Fix: improve attribute label (--show-fec)
* Mon Apr 04 2022 mkubecek@suse.cz
- update to upstream release 5.17
* Feature: transceiver module power mode (--set-module)
* Feature: transceiver module extended state (--show-module)
* Feature: get/set rx buffer length (-g and -G)
* Feature: tx copybreak buffer size (--get-tunable and
- -set-tunable)
* Feature: JSON output for features (-k)
* Feature: support OSFP transceiver modules (-m)
* Fix: add missing free() calls (--get-tunable and --set-tunable)
* Tue Jan 18 2022 mkubecek@suse.cz
- update to upstream release 5.16
* Feature: use memory maps for module EEPROM parsing (-m)
* Feature: show CMIS diagnostic information (-m)
* Fix: fix dumping advertised FEC modes (--show-fec)
* Fix: ignore cable test notifications from other devices
(--cable-test)
* Fix: do not show duplicate options in help text (--help)
* Tue Nov 09 2021 mkubecek@suse.cz
- update to upstream release 5.15
* Feature: new extended link substates for bad signal (no arg)
* Feature: coalesce cqe mode attributes (-c and -C)
* Fix: multiple fixes of EEPROM module data parsing (-m)
* Fix: fix condition to display MDI-X info (no arg)
* Sun Sep 12 2021 mkubecek@suse.cz
- update to new upstream release 5.14
* Feature: do not silently ignore --json if unsupported
* Feature: support new message types in pretty print
* Thu Jul 08 2021 mkubecek@suse.cz
- update to new upstream release 5.13
* Feature: netlink handler for FEC (--show-fec and --set-fec)
* Feature: FEC stats support (--show-fec)
* Feature: standard based stats support (-S)
* Feature: netlink handler for module EEPROM dump (-m)
* Feature: page, bank and i2c selection in module dump (-m)
* Sun May 02 2021 mkubecek@suse.cz
- update to new upstream release 5.12
* Feature: support lanes count (no option and -s)
* Fix: fix help message for master-slave parameter (-s)
* Fix: better error message for master-slave in ioctl code path
* Fix: get rid of compiler warnings in "make check"
* Wed Dec 16 2020 mkubecek@suse.cz
- update to new upstream release 5.10
* infrastructure for JSON output
* separate FLAGS in -h output
* use policy dumps to check flags support
* show pause stats (-a)
* pretty printing of policy dumps
* improve error message when SFP module is missing
* fix use after free in netlink_run_handler()
* fix leaked instances of struct nl_socket
* improve compatibility between netlink and ioctl (-s)
- drop patches present in 5.10 release:
* ethtool-Improve-compatibility-between-netlink-and-io.patch
* netlink-do-not-send-messages-and-process-replies-in-.patch
* netlink-fix-leaked-instances-of-struct-nl_socket.patch
* netlink-fix-use-after-free-in-netlink_run_handler.patch
* Wed Nov 11 2020 mkubecek@suse.cz
- backport post-5.9 fixes
* netlink-fix-use-after-free-in-netlink_run_handler.patch
* netlink-fix-leaked-instances-of-struct-nl_socket.patch
* netlink-do-not-send-messages-and-process-replies-in-.patch
* ethtool-Improve-compatibility-between-netlink-and-io.patch
* Thu Oct 15 2020 mkubecek@suse.cz
- update to new upstream release 5.9
* extended link state
* QSFP-DD support
* tunnel information (--show-tunnels)
* Broadcom bnxt support
* improve compatibility between ioctl and netlink output
* fix cable test TDR amplitude output
* get rid of build warnings
* fix null pointer dereference running against old kernel (no arg)
* update link mode tables
* fix memory leaks and error handling found by static analysis
- update compiler flags
* -Wno-missing-field-initializers no longer needed
* replace -W with -Wextra (preferred form)
* Tue Aug 04 2020 mkubecek@suse.cz
- update to new upstream release 5.8
* netlink handler for device features
* netlink handler for private flags
* netlink handler for ring sizes
* netlink handler for channels counts
* netlink handler for coalescing parameters
* netlink handler for pause parameters
* netlink handler for EEE settings
* netlink handler for timestamping info
* master/slave configuration support
* LINKSTATE SQI support
* cable test support
* cable test TDR support
* JSON output for cable test commands
* igc driver support
* support for get/set ethtool_tunable
* dsa: mv88e6xxx: add pretty dump for 88E6352 SERDES
* fix some build warnings
- drop patches present in 5.8 release:
* netlink-fix-build-warnings.patch
* netlink-fix-error-message-suppression.patch
* netlink-fix-unwanted-switch-fall-through-in-family_i.patch
* Tue Aug 04 2020 mkubecek@suse.cz
- ethtool.keyring:
add new upstream maintainer's key (F4554567B91DE934)
* Fri Jun 12 2020 mkubecek@suse.cz
- prevent misleading netlink error message when running on kernel
without ethtool netlink support:
netlink-fix-error-message-suppression.patch
* Sun Jun 07 2020 mkubecek@suse.cz
- update to new upstream release 5.7
* support LLRS (Low Latency Reed Solomon) FEC mode
* accept long legacy flag names (-K)
* support for newer SFF-8024 compliance codes
* report transceiver when reported by kernel
* improve fallback from netlink to ioctl and error messages
- drop patches present in 5.7 release:
netlink-show-netlink-error-even-without-extack.patch
features-accept-long-legacy-flag-names-when-setting-.patch
refactor-interface-between-ioctl-and-netlink-code.patch
netlink-use-genetlink-ops-information-to-decide-abou.patch
- refresh
netlink-fix-build-warnings.patch
- fix cherry picked from upstream git:
netlink-fix-unwanted-switch-fall-through-in-family_i.patch
* Fri May 15 2020 mkubecek@suse.cz
- update upstream references:
features-accept-long-legacy-flag-names-when-setting-.patch
netlink-show-netlink-error-even-without-extack.patch
netlink-use-genetlink-ops-information-to-decide-abou.patch
refactor-interface-between-ioctl-and-netlink-code.patch
* Tue May 12 2020 mkubecek@suse.cz
- add fixes and improvements originally intended for 5.6:
netlink-show-netlink-error-even-without-extack.patch
features-accept-long-legacy-flag-names-when-setting-.patch
refactor-interface-between-ioctl-and-netlink-code.patch
netlink-use-genetlink-ops-information-to-decide-abou.patch
* Tue May 12 2020 mkubecek@suse.cz
- Update to new upstream release 5.6
* basic infrastructure for netlink kernel interface
* netlink: support "ethtool <dev>"
* netlink: support "ethtool -s <dev> ..."
* netlink: support "ethtool -P <dev>"
* netlink: monitor support
* add --debug option
* netlink: pretty printing of netlink messages
- add libmnl build time dependency
- fix SLE12 build:
netlink-fix-build-warnings.patch
- minor specfile cleanup
* Mon Jan 13 2020 mkubecek@suse.cz
- Update to new upstream release 5.4
* support Energy Detect Power Down
* Solarflare SFF-8079/8472 eeprom interpretation fixes
* fix compiler warnings with new gcc
- drop "-Wno-unused-parameter" from CFLAGS, these warnings should
be gone now
* Sun Nov 03 2019 mkubecek@suse.cz
- Update to new upstream release 5.3
* igb: dump RR2DCDELAY register
* support for dumping nested registers (e.g. CPU port)
* Fri Jul 26 2019 mkubecek@suse.cz
- Update to new upstream release 5.2
* support 100BaseT1 and 1000BaseT1 link modes
* fewer compilation warnings with updated UAPI header copy
* Sat May 18 2019 mkubecek@suse.cz
- Update to new upstream release 5.1
* support for 200Gbps (50Gbps per lane) link modes
* support for new PHY tunable Fast Link Down
* new 'start N' option when setting Rx flow indirection table
* add bash completion script
* support show and set of per queue coalescing
* fec: add pretty dump
* Thu Mar 14 2019 mkubecek@suse.cz
- Hide some innocuous build warnings to make relevant ones more
visible.
* Thu Mar 14 2019 mkubecek@suse.cz
- Update to new upstream release 5.0
* Feature: add pretty print for dsa/mv88e6xxx
* Feature: don't report UFO on kernels >= 4.14
* Fix (potential): zero initalize coalesce struct
* Fri Nov 02 2018 mkubecek@suse.cz
- Update to new upstream release 4.19
* Feature: support combinations of FEC modes
* Fix: unitialized variable in qsfp dump
* Mon Sep 10 2018 jengelh@inai.de
- Use noun phrase for summary.
* Fri Aug 24 2018 mkubecek@suse.cz
- Update to new upstream release 4.18
* Feature: add support WoL using filters
* Feature: dump strings for ixgbe security registers
* Wed Jun 20 2018 kbabioch@suse.com
- Update to new upstream release 4.17
* Fix: In ethtool.8, remove superfluous and incorrect \c
* Fix: fix uninitialized return value
* Fix: fix RING_VF assignment
* Fix: remove unused global variable
* Fix: several fixes in do_gregs()
* Fix: correctly free hkey when get_stringset() fails
* Fix: remove unreachable code
* Fix: fix stack clash in do_get_phy_tunable and do_set_phy_tunable
* Feature: Add register dump support for MICROCHIP LAN78xx
* Sat Apr 14 2018 mkubecek@suse.cz
- Update to new upstream release 4.16
* Feature: add support for extra RSS contexts and RSS steering filters
* Feature: Add SFF 8636 date code parsing support
* Fix: don't fall back to grxfhindir when context was specified
* Fix: correct display of VF when showing vf/queue filters
* Fix: show VF and queue in the help for -N
* Fix: correct VF index values for the ring_cookie parameter
* Tue Apr 10 2018 mkubecek@suse.cz
- Fix build for targets not (fully) supporting %license macro
* Tue Apr 03 2018 kukuk@suse.de
- Use %license instead of %doc [bsc#1082318]
* Fri Feb 02 2018 mkubecek@suse.cz
- Update to new updstream release 4.15
* Feature: Support for FEC encoding control
* Feature: Add extended compliance codes parsing to sfp modules
* Feature: Add ETHTOOL_RESET support via --reset command
* Fix: Revert "ethtool: Add DMA Coalescing support"
* Fix: fix MFLCN register dump for 82599 and newer
* Mon Oct 30 2017 mkubecek@suse.cz
- Update to new upstream release 4.13
* Feature: add support for HWTSTAMP_FILTER_NTP_ALL
* Feature: Add DMA Coalescing support
* Feature: Remove UDP Fragmentation Offload error prints
* Feature: stmmac: Add DMA HW Feature Register
* Fix: Do not return error code if no changes were attempted.
* Fix: Fix formatting of advertise bitmask
* Fix: fix the rx vs tx mixup in set channel message
* Tue Jun 06 2017 mkubecek@suse.cz
- Update to new upstream release 4.11
* Feature: Support for configurable RSS hash function
* Feature: support queue and VF fields for rxclass filters
* Feature: Add support for 2500baseT/5000baseT link modes
* Fix: Fix SFF 8079 cable technology bit parsing
* Fix: sync help output for -x/-X with man page
* Thu Mar 30 2017 mkubecek@suse.cz
- Update to new upstream release 4.10
* Fix: Fix the "advertise" parameter logic.
* Feature: Implement ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY downshift
* Feature: add register dump support for fjes driver (-d option)
- add keyring with John Linville's key for tarball verification
* Tue Oct 11 2016 mkubecek@suse.cz
- Update to new upstream release 4.8
* Feature: QSFP Plus/QSFP28 Diagnostics Information Support
* Feature: Enhancing link mode bits to support 25G/50G/100G
* Feature: add support for 1000BaseX and missing 10G link mode
* Fixes: address Coverity issues 1363118 - 1363125
* Mon Jul 04 2016 mkubecek@suse.cz
- Update to new upstream release 4.6
* Feature: Support register dump on Intel X550 NICs (-d option)
* Fix: Correct some reported register offsets on Intel 10GbE NICs
(-d option)
* Feature: Add IPv6 support to NFC (-n, -N, -u and -U options)
* Feature: Add support for ETHTOOL_xLINKSETTINGS ioctls (no
option and -s option)
* Feature: Use netlink socket when AF_INET not available
* Tue Mar 15 2016 mkubecek@suse.cz
- Update to new upstream release 4.5
* Fix: Heap corruption when dumping registers from a file
(-d option)
* Fix: Stricter input validation for EEPROM setting (-E option)
* Feature: Add PHY statistics support (--phy-statistics option)
* Feature: Support setting default Rx flow indirection table
(-X option)
* Doc: Properly indent sub-options in man page
* address build issues (mostly compiler warnings)
* Fri Oct 09 2015 mkubecek@suse.cz
- Update to new upstream release 4.2
* Feature: Support soldered-on modules in module EEPROM dump
(-m option)
* Feature: Add register dump support for VMware vmxnet3
(-d option)
* Feature: Update register dump support for IBM EMAC (-d option)
(requires Linux 4.3 or a future stable update to 4.1 or 4.2)
* Doc: Fix typo in man page
* Mon Jun 01 2015 mkubecek@suse.cz
- Update to new upstream release 4.0
* Fix: Formatting of RX flow hash indirection table when size not
divisible by 8 (-x option)
* Fix: Add missing Advertised speeds (no option and -s option)
* Feature: Add support to get expansion ROM version (-i option)
* Feature: Include SFP serial number and date in EEPROM dump
(-m option)
* Sun Jan 11 2015 jengelh@inai.de
- Update to new upstream release 3.18
* Fix: Lookup of SFP Tx bias in SFF-8472 module diagnostics
(-m option)
- Drop usrmerge compat symlinks
* Tue Nov 18 2014 jengelh@inai.de
- Update to new upstream release 3.16
* Support for configurable RSS hash key (-x/-X options)
* Add register dump support for Altera Triple Speed Ethernet
(-d option)
* Report Backplane as a supported port
- Remove unused call to %gpg_verify (the macro expands to nothing);
source validation handled by osc.
* Thu Feb 06 2014 puzel@suse.com
- Drop ethtool-display-switch-port-attributes.patch (failed
upstream acceptance and has to be reworked)
* Thu Dec 05 2013 puzel@suse.com
- Add '-q' command line option to display switch port attributes
(bnc#853637, fate#315293)
- added patches:
* ethtool-display-switch-port-attributes.patch
* Sun Nov 24 2013 p.drouand@gmail.com
- Update to version 3.12.1
* Fix: Memory corruption when applying external calibration to
SFF-8472 module diagnostics (-m option)
* Feature: Add Intel 82599 and x540 DCB registers to dump
(-d option)
- Changes from 3.12
* Fix: Remove alternate method to check for VLAN tag offload on Linux
< 2.6.37 (-k/-K options)
* Fix: Hide state of VLAN tag offload and LRO if the kernel is too old
for us to reliably detect them (-k option)
* Feature: Add register dump support for Solarflare SFC9100 family
(-d option)
- Changes from 3.11
* Feature: Update Realtek chip list for register dump to match
r8169 driver in Linux 3.11 (-d option)
* Feature: Add ixgbevf support for register dump (-d option)
* Feature: Filter ixgbe register dump according to the specific chip
(-d option)
* Thu Jul 04 2013 jengelh@inai.de
- Update to new upstream release 3.10
* Displaying of support for 10000BASE-KR link mode was implemented.
* Support for new versions of ixgbe register dump was added.
* The private flags print output was beautified.
- More robust make install call
- Optional signature verification
* Mon Apr 22 2013 puzel@suse.com
- Update to new upstream release 3.8
* Feature: Allow setting destination MAC address in L3/L4 flow
spec rules (-N/-U option)
* Fix: Show full 64 bits of user-data (-n/-u option)
* Fix: Add version check for et131x regs (-d option)
* Doc: Improve description of -f, -t, -s, -N/-U, -W options in
man page
* Fix: Restore 20000baseKR2 cap display (no options)
* Mon Dec 17 2012 puzel@suse.com
- Update to new upstream release 3.7
* Fix: Gracefully handle failure of register pretty-printer (-d
option)
* Feature: Add support for et131x registers (-d option)
* Feature: Basic optical diagnostics for SFF-8472 modules (-m
option)
* Mon Oct 08 2012 puzel@suse.com
- Update to new upstream release 3.6
* Feature: Allow setting MDI-X state (-s option)
* Fix: Preserve pause advertising bits when setting speed and
duplex with autoneg on (-s option)
* Fix: Don't call ioctl to set EEE parameters if they are the
same as the current parameters (--set-eee option)
* Mon Aug 06 2012 puzel@suse.com
- Update to new upstream release 3.5
* Display support for 1000BASE-KX and 10GBASE-KX4 link modes
* Energy-Efficient Ethernet (EEE) configuration
(--show-eee and --set-eee options)
* Display support for 40G link modes
* Fix: Don't trust drivers to null-terminate strings
* Sat Jun 16 2012 jengelh@inai.de
- Update to new upstream release 3.4.1
* This release adds reporting of driver features ("-i")
* reporting of supported pause frame modes and of 20G link modes
* firmware dumps ("-w" and "-W")
* external loopback tests ("-t")
* reporting and configuring the number of channels/queues
("-l" and "-L") and time stamping capabilities ("-T")
* reporting of pause frame autonegotiation results ("-a")
* support for querying and setting all generic net device features
("-k" and "-K") and private flags
* dumping of plugin module EEPROM ("-m")
* Wed May 16 2012 andreas.stieger@gmx.de
- Add xz build requirement to fix build for openSUSE 11.4
* Mon Feb 27 2012 puzel@suse.com
- update to ethtool-3.2
* Feature: Add support for querying and setting private flags
(--show-priv-flags, --set-priv-flags options)
* Feature: Omit zero values in Solarflare register tables (-d
option)
* Feature: Allow driver to select RX NFC rule location (-U
option)
* Fix: Correct register dump offsets for Intel 82575 chipsets
(-d option)
* Wed Feb 08 2012 rschweikert@suse.com
- keep binary in /usr tree (UsrMerge project)
* Tue Dec 13 2011 puzel@suse.com
- update to ethtool-3.1
* Fix: Show all non-zero registers for tg3 (-d option)
* Feature: Add support for external loopback test (-t option)
* Fix: Show correct flow control registers for Intel 82599 (-d option)
* Feature: Add support for reporting and configuring numbers of
channels/queues (-l and -L options)
* Feature: Report pause frame autonegotiation result (-a option)
* Doc: Change device name metavariable from 'ethX' to 'devname'
* Doc: Fix various layout problems
* Cleanup: Reorganise and add test cases for argument parsing
* Fix: Strictly check for extraneous or missing arguments; in
particular, fail if the device name is missing
* Wed Dec 07 2011 cfarrell@suse.com
- license update: GPL-2.0
sfc.c and stmmac.c have GPL-2.0 licenses
* Fri Dec 02 2011 coolo@suse.com
- add automake as buildrequire to avoid implicit dependency
* Sun Sep 18 2011 jengelh@medozas.de
- Remove redundant/obsolete tags/sections from specfile
(cf. packaging guidelines)
* Mon Aug 08 2011 puzel@novell.com
- update to ethtool-3.0
* Feature: Report supported pause frame modes
* Feature: Support firmware dump (-w and -W options)
* Feature: Report advertised and supported 20G link modes
* Feature: Add an 'l4data' option for ip4 filters (-U option)
* Fix: Correct swapped h_source and h_dest fields for ether
filters (-U option)
* Fix: Set ip_ver field correctly for ip4 filters (-U option)
* Fix: Correct parameter validation for -e and -E options; in
particular, treat the 'magic' value as unsigned
* Feature: Report some driver features (-i option)
* Doc: Remove misleading 'Auto' advertising mask from manual page
* Doc: Improve table formatting on manual page, using tbl
* Doc: Remove initial blank page in printed manual page
* Doc: Fix line-wrapping of options
* Feature: Add support for ESP as a separate protocol from AH
(-n, -N, -u and -U options)
* Cleanup: Remove support for showing RX n-tuple settings
(-u option), which was never implemented correctly in the kernel
* Feature: Add support for RX network flow classifier (NFC)
(-u and -U options)
* Feature: Add support for e1000 M88 PHY registers (-d option)
* Cleanup: Change bug-address to netdev
- use spec-cleaner
* Tue Mar 15 2011 bphilips@novell.com
- Update to ethtool-2.6.38
* Doc: Fix spelling and spacing in online help
* Doc: Update date, version and web site reference in manual page
* Doc: Fix spelling, capitalisation, consistency and style in
manual page
* Doc: Generalise some references to network devices rather than
Ethernet devices
* Fix: Don't silently ignore speed/duplex when autoneg is on
* Fix: Report an error (rather than full usage information) if
given an unrecognised option
* Feature: Add --version option
* Thu Nov 18 2010 puzel@novell.com
- update to ethtool-2.6.36
* Fix: RX n-tuple masks and documentation
* Feature: Ethernet-level RX n-tuple filtering and 'clear' action
* Feature: stmmac register dump support
* Feature: get permanent address (-P) option
* Feature: VLAN acceleration control
* Feature: sfc register dump support
* Feature: improve cmd line parsing of ints, IPv4 addresses
* Feature: support ethtool named flags, messaging types
* Feature: minor man page fixes
* Feature: control RX flow hash indirection
* Tue Jul 27 2010 puzel@novell.com
- update to ethtool-2.6.34
* Feature: Support n-tuple filter programming
* Feature: Support rx hashing, v2 (targetted for 2.6.35)
* Feature: Add names of newer Marvell chips
* new release numbering scheme, based
on the latest upstream kernel interface supported.
* Fix: several man page corrections
* Feature: rx flow hash configuration
* Feature: report 10000baseT support, where available
* Feature: report MDI-X status, pause auto-neg, link partner
adverts
* Feature: support additional port types
* Feature: support arbitrary speeds, faster than 65535 Mb
* Feature: large and generic receive offload (LRO, GRO) support
* Feature: option to flash firmware image from specified file
* Feature: support for block writing of EEPROMs
* Feature: marvell register dump update
* Feature: at76c50x-usb, e1000e, igb, ixgbe, r8169 register
dump support
* Cleanup: remove support for RX hashing by port
* Doc: Explicitly ship GPLv2 license
- drop all patches (fixed upstream)
* Mon Jul 12 2010 puzel@novell.com
- add get-set-gro-settings.patch (bnc#616263)
* Fri Jan 08 2010 jengelh@medozas.de
- enable parallel build
* Tue Dec 01 2009 mseben@novell.com
- add speed-parse.patch : fix parse of 10Gbe option (bnc#557016)
- add cmd-speed-display-all.patch Display all NIC speeds [FATE#305494]
* Tue Nov 04 2008 hvogel@suse.de
- Add support for LRO (Large Receive Offload) [bnc#440003]
* Fri Sep 12 2008 bphilips@suse.de
- Add support for larger speed field to do greater than 65535Mb/s devices
* Wed Dec 19 2007 mskibbe@suse.de
- Bug 285472 - network script does not work for /usr over NFS
* Fri Jul 27 2007 mskibbe@suse.de
- update to version 6 which includes:
o updates for a lot of NICs
o preparing for 10G NICs
o a log Bugfixes
* Thu Apr 12 2007 lnussel@suse.de
- remove superfluous buffer overflow check patch
* Wed Sep 06 2006 mskibbe@suse.de
- fix bug #202756 - No Buffer Overflow check in Ethtool
* Mon Sep 04 2006 mskibbe@suse.de
- update to version 5 which includes:
o Security: Avoid potential buffer overflow
o Feature: GSO support
o Feature: skge register dump
* Thu Aug 31 2006 mskibbe@suse.de
- update to version 4 which
o includes UFO support
o support long options
o includes e1000, pcnet32, tg3 updates
o added PPC4xx EMAC support
o Use hexdump instead of single values for register dump
* Wed Jan 25 2006 mls@suse.de
- converted neededforbuild to BuildRequires
* Sat Jan 29 2005 hvogel@suse.de
- update to version 3
* Mon Aug 23 2004 mmj@suse.de
- Update to ethtool-2 which includes all our patches
* Thu Jun 24 2004 meissner@suse.de
- Added pcnet32 register dumping LTC#9592/SUSE#42408.
* Mon May 24 2004 meissner@suse.de
- return error value from test option LTC#7166/SUSE#40960.
* Sun Jan 11 2004 adrian@suse.de
- build as user
* Tue Aug 26 2003 pthomas@suse.de
- Upgraded to 1.8
* Tue Aug 26 2003 pthomas@suse.de
- Remove the bogus rejection of devices whose names that do not begin
with either 'eth' or 'usb'.
* Mon Jun 02 2003 pthomas@suse.de
- Add support for AMD-8111.
* Fri Feb 07 2003 meissner@suse.de
- Upgraded to current CVS, which has some e1000 fixes needed by IBM.
* Thu Feb 06 2003 meissner@suse.de
- Upgraded to 1.7:
* Mon Jun 24 2002 pthomas@suse.de
- Initial package creation.
- Fix most gcc warnings.
/usr/sbin/ethtool /usr/share/doc/packages/ethtool /usr/share/doc/packages/ethtool/AUTHORS /usr/share/doc/packages/ethtool/NEWS /usr/share/licenses/ethtool /usr/share/licenses/ethtool/COPYING /usr/share/man/man8/ethtool.8.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Nov 12 00:02:43 2024