liblldpctl4-1.0.18-bp160.1.13 RPM for x86_64

From OpenSuSE Leap 16.0 for x86_64

This package provides the shared library for lldpd.

LLDP is an industry standard protocol designed to supplant proprietary
Link-Layer protocols such as Extreme EDP (Extreme Discovery Protocol)
and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an
inter-vendor compatible mechanism to deliver Link-Layer notifications
to adjacent network devices.

Provides

• liblldpctl4
• liblldpctl.so.4()(64bit)
• liblldpctl.so.4(LIBLLDPCTL_4.6)(64bit)
• liblldpctl.so.4(LIBLLDPCTL_4.7)(64bit)
• liblldpctl.so.4(LIBLLDPCTL_4.8)(64bit)
• liblldpctl.so.4(LIBLLDPCTL_4.9)(64bit)
• liblldpctl4(x86-64)

Requires

• /sbin/ldconfig
• /sbin/ldconfig
• libbsd.so.0()(64bit)
• libbsd.so.0(LIBBSD_0.0)(64bit)
• libbsd.so.0(LIBBSD_0.2)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.14)(64bit)
• libc.so.6(GLIBC_2.2.5)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libc.so.6(GLIBC_2.8)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

MIT

Changelog

* Sun Jan 28 2024 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.18
    Changes:
    * Remove support for building 802.3bt TLVs (broken).
    Fixes:
    * Fix memory leaks in EDP/FDP decoding when receiving some TLVs
      twice.
    * Do not set interface description continuously.
    * Use a different Netlink socket for changes and queries.
* Mon May 29 2023 Dirk Müller <dmueller@suse.com>
  - update to 1.0.17:
    * Fix: Read overflow when parsing CDP addresses.
    * Don't output empty lines on configure commands.
* Fri Nov 11 2022 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.16
    * Do not use 00:00:00:00:00:00 as chassis ID.
    * Do not busy loop when an interface with a neighbor disappears.
* Mon Aug 29 2022 Jan Engelhardt <jengelh@inai.de>
  - Update to release 1.0.15
    * protocol/lldp: accept unknown TLVs on known orgs
    * client: Added support to override system capabilities
    * netlink: ignore IPv6 temporary addresses
* Sat May 21 2022 Martin Hauke <mardnh@gmx.de>
  - Upate to version 1.0.14
    Changes:
    * Add configure commands to alter inventory TLVs.
    Fixes:
    * Update seccomp rules for newer kernel/libc.
    * Correctly handle an interface whose index has changed.
    * Don't send VLANs when there are too many.
* Sun Nov 14 2021 Martin Hauke <mardnh@gmx.de>
  - Update to versino 1.0.13
    * Add support for 2.5G, 5G, 25G and 50G based Ethernet.
    * Fix LLDP packets encapsuled in VLAN 0 in some conditions.
    * Fix heap overflow when reading SONMP. CVE-2021-43612.
* Fri Oct 15 2021 Johannes Segitz <jsegitz@suse.com>
  - Drop ProtectClock hardening, can cause issues if other device acceess is needed
* Tue Oct 05 2021 Johannes Segitz <jsegitz@suse.com>
  - Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
    * harden_lldpd.service.patch
* Fri Aug 20 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.12:
    Fix:
    * Use a dedicated file lock to prevent concurrent changes from
      lldpcli.
    * Require/display powerpairs for Dot3 power even when device
      type is PD.
  - Fix URL
* Sun May 02 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.11:
    * Changes:
      + Disable LLDP in firmware for Intel X7xx cards.
    * Fix:
      + Ensure Intel E8xx cards can transmit LLDP packets.
* Sat Apr 10 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.10:
    Fix:
    * Fix chroot directory creation.
* Fri Apr 02 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.9:
    Fix:
    * Do not use interface alias if we set it ourselves.
    * More memory leak fixes on duplicate TLVs in LLDP, CDP and EDP
      (related to CVE-2020-27827).
    Changes:
    * Display port status with "show interfaces".
    * Do not display "age" and "via" when using "show interfaces".
* Thu Jan 14 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.8:
    Fix:
    * Out-of-bound read access when parsing LLDP-MED civic address in
      liblldpctl for malformed fields.
    * Fix memory leak when receiving LLDPU with duplicate fields.
      CVE-2020-27827.
    Changes:
    * Enable "router" capability bit when IPv6 routing is enabled.
* Sun Nov 01 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.7:
    Fix:
    * Do not listen only to LLDP packets on Linux. When an interface
      is enslaved to an Open vSwitch, incoming packets are missed.
* Tue Oct 13 2020 Jan Engelhardt <jengelh@inai.de>
  - Replace old specfile constructs. Do not suppress errors from
    useradd. Require right subpackage from lldpd-devel. Trim
    redundancies from descriptions.
* Sat Sep 05 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.6:
    Fix:
    * Do not loose chassis local information when interface status
      changes.
    * Fix SNMP walk on lldpRemTable when missing remote system
      name or description.
    * Remove length limitation on system description and platform.
    Changes:
    * Deprecate use of lldpctl_watch_callback(). Use
      lldpctl_watch_callback2() instead.
    * Upgrade embedded libevent to 2.1.11-stable
    * Add support of sending LLDP frames on a configured VLAN
* Sun Feb 02 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.5:
    Changes:
    * Interface names are also matched for management addresses.
    * On Linux, only register protocol handler for LLDP when only LLDP
      is enabled.
    * Stricter on LLDP incoming frames validation.
    * Add support for VLAN-aware bridges for Linux (no range support).
    * Add support for 802.3BT (no SNMP support).
    * Add support for millisecond-grained tx-interval
    * Use generic names for VLAN names, instead of interface names (eg
      vlan100 instead of eth1.100).
    Fix:
    * Don't clear chassis TLV on shutdown LLDPDU.
    * Don't require/display powerpairs for Dot3 power when device type
      is PD.
* Wed Nov 13 2019 Martin Hauke <mardnh@gmx.de>
  - Correct License
    * MIT -> ISC
* Sun Jun 16 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.4:
    Changes:
    * Add "configure system max-neighbors XX" command to modify maximum
      of neighbors accepted per port.
    * Implement lldpRemOrgDefInfoTable table for custom TLVs.
    * Fix:
    * Better compliance for statsTLVsUnrecognizedTotal and
      statsAgeoutsTotal counters.
    * On Linux, handle rare blocking case in Netlink code.
* Thu Feb 14 2019 Martin Pluskal <mpluskal@suse.com>
  - Update to version 1.0.3:
    * Fix creation of chroot directory.
  - Simplify spec file
* Mon Dec 03 2018 mardnh@gmx.de
  - Update to version 1.0.2
    * On Linux, the monitor process will now drop its privileges
      instead of running as root. It will keep CAP_NET_RAW,
      CAP_NET_ADMIN and CAP_DAC_OVERRIDE capabilities.
    * Support for CDP PD PoE (with negotiation).
    * Move support for bonded devices on Linux < 2.6.27 into the
      `--enable-oldies` option. This avoids duplicate packets
      starting from Linux 4.19.
* Wed Aug 01 2018 mpluskal@suse.com
  - Adjust sysconfig
* Mon Apr 09 2018 mardnh@gmx.de
  - Update to version 1.0.1 (boo#1103351)
    * Use "mkdir -p" instead of "mkdir" in systemd unit.
* Mon Apr 09 2018 mardnh@gmx.de
  - Update to version 1.0.0
    * Changes:
      + Chassis ID can be set to an arbitrary value with "configure
      system chassisid".
      + Port description can be overriden directly with "configure
      lldp portdescription".
      + Command "configure system interface permanent" enables one to
      specify a pattern for interfaces to be kept in memory even when
      they are removed from the system.
    * Fix:
      + Ensure chassis-related changes are propagated immediately.
      + Ensure management address change is correctly detected.
* Mon Dec 18 2017 mpluskal@suse.com
  - Disable seccomp as it breaks on Factory
  - Further update sysconfig
  - Some more spec-cleaner goodness
* Sat Dec 16 2017 astieger@suse.com
  - verify source signature
* Mon Dec 11 2017 mpluskal@suse.com
  - Enable seccomp for Factory
  - Adjust default sysconfig to enable other protocols and self
    advertisment
  - Do not create user/grou starting with underscore (_lldpd)
* Mon Dec 04 2017 mpluskal@suse.com
  - Use fillupdir macro
  - Enable libbsd
  - Fix group for devel subpackage
* Mon Nov 27 2017 mpluskal@suse.com
  - Clarify licensing and usage of some header files
  - Enable support for libseccomp (disabled by default)
  - Make buildign more verbose
* Wed Nov 22 2017 mardnh@gmx.de
  - Created lldpd.changes file (converted inline Changelog via
    spec2changelog)
  - Specfile cleanup (removed all stuff that is not relevant for
    recent (open)SUSE versions.)
* Tue Nov 21 2017 bernat@luffy.cx
  - New upstream version.
* Sun Aug 20 2017 bernat@luffy.cx
  - New upstream version.
* Sun Mar 19 2017 bernat@luffy.cx
  - New upstream version.
* Sat Jan 21 2017 bernat@luffy.cx
  - New upstream version.
* Fri Sep 30 2016 bernat@luffy.cx
  - New upstream version.
* Fri Jun 17 2016 bernat@luffy.cx
  - New upstream version.
* Sat May 21 2016 bernat@luffy.cx
  - New upstream version.
* Sat Mar 19 2016 bernat@luffy.cx
  - New upstream version.
* Sat Feb 20 2016 bernat@luffy.cx
  - New upstream version.
* Fri Jan 01 2016 bernat@luffy.cx
  - New upstream version.
  - Do not rely on libnl3.
* Sun Dec 27 2015 bernat@luffy.cx
  - New upstream version.
  - Use system libnl3 when possible.
  - Use system libevent when possible.
* Wed Sep 09 2015 bernat@luffy.cx
  - New upstream version.
* Fri Aug 07 2015 bernat@luffy.cx
  - New upstream version.
* Wed May 20 2015 bernat@luffy.cx
  - New upstream version.
* Sat Apr 04 2015 bernat@luffy.cx
  - New upstream version.
* Tue Dec 30 2014 bernat@luffy.cx
  - New upstream version.
* Sat Nov 22 2014 bernat@luffy.cx
  - New upstream version.
  - Completion for bash and zsh.
* Wed Oct 08 2014 bernat@luffy.cx
  - New upstream version.
  - Completion for bash and zsh.
* Mon Jul 21 2014 bernat@luffy.cx
  - New upstream version.
* Wed May 28 2014 bernat@luffy.cx
  - New upstream version.
* Sun Apr 13 2014 bernat@luffy.cx
  - New upstream version.
* Sun Nov 10 2013 bernat@luffy.cx
  - New upstream version.
* Fri Jul 12 2013 bernat@luffy.cx
  - New upstream version.
* Sat Jun 22 2013 bernat@luffy.cx
  - New upstream version.
* Sun May 12 2013 bernat@luffy.cx
  - New upstream version.
* Fri Apr 19 2013 bernat@luffy.cx
  - New upstream version.
* Sat Jan 12 2013 bernat@luffy.cx
  - New upstream version.
* Sun Jan 06 2013 bernat@luffy.cx
  - New upstream version.
  - Requires readline-devel.
  - Ships lldpcli.
* Thu Sep 27 2012 bernat@luffy.cx
  - New upstream version
  - Do not require libevent, use embedded copy.
  - Provide a -devel package.
* Fri Jun 11 2010 bernat@luffy.cx
  - New upstream version
  - Define bcond_without and with macros if not defined to be compatible
    with RHEL
  - Requires useradd and groupadd
  - Adapt to make it work with SuSE
  - Provide an init script targetted at SuSE
  - Build require lm_sensors-devel on RHEL
* Fri Mar 12 2010 bernat@luffy.cx
  - New upstream version
  - Add XML support
* Tue May 19 2009 bernat@luffy.cx
  - Add variables
  - Enable SNMP support
  - Add _lldpd user creation
  - Add initscript
  - New upstream version
* Mon May 18 2009 dean.hamstead@optusnet.com.au
  - Initial attempt

Files

/usr/lib64/liblldpctl.so.4
/usr/lib64/liblldpctl.so.4.9.1

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Sep 30 22:45:42 2025