| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: saptune | Distribution: SUSE Linux Framework One |
| Version: 3.1.3 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.3 | Build date: Fri Jun 28 15:36:47 2024 |
| Group: System/Management | Build host: reproducible |
| Size: 3646269 | Source RPM: saptune-3.1.3-slfo.1.1.3.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://www.suse.com/products/sles-for-sap | |
| Summary: Comprehensive system tuning management for SAP solutions | |
The utility adjusts system parameters such as kernel parameters and resource limits to allow running various SAP solutions at satisfactory performance. The utility can be used in place of sapconf.
GPL-3.0-only
* Fri Jun 28 2024 abriel@suse.com
- update package version of saptune to 3.1.3
* remove note 1868829 from solution S4HANA-APPSERVER as it is a
HANA DB note and was added by accident
(bsc#1226093)
* for verify and simulate output table - wrap content of the
columns 'actual', 'expected' and 'override', if they exceed a
width of 30 characters (e.g. net.ipv4.ip_local_reserved_ports)
* support inline comments in /etc/sysconfig/saptune
* change handling of the performance options.
Check, if the settings are supported in the get-Functions too.
This should fix the problem with some special Azure VMs
(E20d_v5) on newer SLES SPs
(jsc#SAPSOL-110)
* SAP Note 2578899 updated to Version 48
setting kernel.pid_max to 4194304 and
start sysctl-logger service
* Tue Apr 09 2024 abriel@suse.com
- add require of package sysctl-logger for 15SP4 and 15SP5 too
(jsc#PED-6220)
* Wed Feb 14 2024 abriel@suse.com
- update package version of saptune to 3.1.2
* to support setups with saptune monitoring and heavy automation
we limited the setting of our saptune lock to commands having
the potential to change anything in the system.
(bsc#1219500)
* fix timestamp in log messages of saptune
* remove redundant version information in header comment of
note definition files
* SAP Note 1656250 updated to Version 63
SAP Note 1771258 updated to Version 8
SAP Note 2382421 updated to Version 45
SAP Note 3024346 updated to Version 10
but without parameter value changes, only house keeping of the
version section and comment updates
* SAP Note 1984787 updated to Version 42
SAP Note 2578899 updated to Version 47
- add require of package sysctl-logger for 15SP6
(jsc#PED-5025)
* Wed Nov 01 2023 abriel@suse.com
- update package version of saptune to 3.1.1
* typo in logfile directory name creates /varlog/saptune instead
of /var/log/saptune
(bsc#1215969)
* SAP Note 2382421
fix missing handling for Azure systems regarding parameter
'net.ipv4.tcp_timestamps'. This exclude setting was left out
during the last SAP Note update by mistake.
* add parameter IGNORE_RELOAD to /etc/sysconfig/saptune to
prevent saptune from stopping and starting the system tuning
during package update
Related to sapconf bug bsc#1209408.
- create a flag file in preinstall and remove it in posttrans of
the package installation to inform saptune that currently a
package installation/update takes place so that some special
situations can be handled as expected.
* Wed Aug 30 2023 abriel@suse.com
- update package version of saptune to 3.1.0
* machine readable interfaces for saptune
add json output support
related json v1 schemas can be found after installation
on the system at /usr/share/saptune/schemas/1.0/
(jsc#PED-2194, jsc#PED-2195, jsc#SLE-23696)
* enhance the identification of the cloud service provider
(jsc#SLE-23779)
* add a command line syntax check
* colorized and filtered output for 'saptune note verify'
It is now possible to uses a 'color scheme' for the output to
highlight the non-compliant parameter or to limit the verify
output to show only non-compliant parameter.
(jsc#SLE-23727)
* add action 'saptune solution change' to switch to a new
solution even that another solution was already applied.
It's basically a 'revert OLDSOLUTION' && 'apply NEWSOLUTION'.
This will change the Note order in case of additional applied
Notes, but this is intended.
The confirmation for the revert of the old solution can be
suppressed by '--force'
(jsc#PED-2196)
* introduce a Trento naming convention for custom solutions in
the saptune man page to support trento checks.
(jsc#PED-4118)
* deprecate action 'saptune note|solution simulate'.
The action might get removed in a future saptune version
(jsc#PED-2199)
* deprecate support for the v1 vendor or custom specific Note
definition file format
(jsc#SLE-23725)
* detect virtualization environment by 'systemd-detect-virt' and
add the information to 'saptune status'.
(jsc#SLE-23885)
* enhance saptune with the new action 'check' to directly call
the external check script '/usr/sbin/saptune_check'.
(jsc#SLE-23726)
* de-deprecate the MAXDB solution definition. It is still active
supported by SAP.
And add solution NETWEAVER+MAXDB
(jsc#SLE-23724)
* support inline comments in the Note definition files
(jsc#SLE-23729)
* rework Note representation in 'saptune status' output
(jsc#SLE-24530)
* fix problem with 'verify' output, if a sysctl parameter is
empty on the system
(bsc#1199527)
* add hint to the manual page of saptune(8) regarding 'missing'
line feed for 'saptune note applied' and 'saptune note enabled'
It's intended.
(bsc#1193714)
* rework the version section to make it clear, which information
needs to be provided
(jsc#SLE-23722)
* add more information to 'saptune status':
differ between 'enabled' and 'applied' Solutions and add the
related Notes.
differ between Notes and Solutions in the staging area.
rename 'system state' line to 'systemd system state' to prevent
misunderstandings.
add virtualisation information.
* add tuning state to 'saptune status' output.
The check of the tuning state (an internal 'verify' operation)
can be skipped by using the flag '--non-compliance-check'.
In this case the tuning state will be reported as
unknown (checking disabled)
'saptune status' will exit with a return code of '4', if the
saptune service is enabled, the system is tuned, but the
tuning state is 'not compliant'.
(jsc#SLE-24928)
* add support for the IBM Power architecture to the vendor and
model section tagging
(jsc#SLE-23824)
* add new SAP Note 1868829 to set fs.aio-max-nr and add it to
the HANADB related solutions for SLE12 and SLE15.
* SAP Note 3024346 updated to Version 6
SAP Note 1557506 updated to Version 16
SAP Note 1656250 updated to Version 46
SAP Note 1805750 updated to Version 9
SAP Note 2161991 updated to Version 28
SAP Note 2205917 updated to Version 63
SAP Note 2382421 updated to Version 45
SAP Note 2534844 updated to Version 15
SAP Note BOBJ updated to Version 1
but without parameter value changes, only house keeping of the
version section and comment updates
* SAP Note 1984787 updated to Version 40
SAP Note 2578899 updated to Version 46
SAP Note 2684254 updated to Version 23
SAP Note 1680803 updated to Version 27
includes version 3.1 of 'SAP Applications on SAP Adaptive
Server Enterprise - Best Practices for Migration and Runtime'
* Solution 'SAP-ASE' changed - remove SAP Note 1410736.
The best practice document (version 3.1) for ASE was changed
and the SAP Note 1410736 is no longer referenced. Instead the
parameter 'net.ipv4.tcp_keepalive_time' is set in
SAP Note 1680803 (the ASE SAP Note) directly.
* introduce an additional parameter 'SKIP_SYSCTL_FILES' in the
/etc/sysconfig/saptune configuration file, which contains a
comma separated list of sysctl.conf files or directories
containing sysctl.conf files, which should be excluded from
the 'additional defined' WARNING messages.
Default is
SKIP_SYSCTL_FILES="/boot"
to skip the WARNINGS for '/boot/sysctl.conf-<kernelversion>'
- check in preinstall and posttrans of the package installation,
if the active tuned profile is still 'saptune', even that this
profile no longer exists. If yes, try to remove it.
(bsc#1194688)
* Mon Jan 10 2022 abriel@suse.com
- update package version of saptune to 3.0.2
- avoid excluding LVM slaves when getting valid block devices
(bsc#1194299)
- fix 'not compliant' state for energy_perf_bias on Power systems
and suppress misleading error message regarding missing 'mokutil'
(bsc#1193435)
- fix wrong behaviour of 'saptune revert all', if the saptune
service was stopped between the two commands 'apply' and
'revert all'
- 'saptune service enablestart|disablestop' now always perform
both actions and does no longer stop working, if the service is
already started|stopped.
(bsc#1193241)
- restrict the sys section of the AWS note 1656250 to the
availability of a nvme block device to support AWS x1e instances
too.
sys section definition of Note 1656250 changed.
(bsc#1192029)
- abandon the dependency to 'mokutil' by relying on sysfs to
detect a secure boot environment.
Related to bsc#1193435
- support /etc/fstab entries with 4 instead of 6 fields as these
are valid entries.
Change error handling from 'panic' to error log messages.
(bsc#1193580)
- enhance man page 'saptune.8'.
Add entry 'configured Note' and some more descriptions of the
entries from 'saptune service status'
(bsc#1192697)
- as the Power systems (hardware architecture 'ppc64le') does not
support files in '/sys/class/dmi' (this directory is not
available on the 'ppc64le' hardware architecture) some of our
section 'tags' will not work.
Add some additional log messages to identify the cause and add
a hint to the man page.
- fix block device settings (e.g. NRREQ) for multipath devices
(bsc#1193576)
- 'saptune verify' will now report a non existing sysctl or sys
parameter as 'not available on the system' (footnote) and this
parameter will not affect the compliance state.
But a warning is displayed to raise attention to may be typos in
the parameter name.
- 'saptune status' now reports the 'real' unit state, no mapping
of not running (inactive) service to simply 'stopped' any more.
(bsc#1194334)
* Tue Nov 09 2021 abriel@suse.com
- update package version of saptune to 3.0.1
- fix the scheduler settings for multi path devices and
suppress missleading warning messages regarding vendor and model
information during block device detection
(bsc#1192460)
- fix override of custom solutions
(bsc#1192062)
- add missing update function for enabled solutions and add a
special fix to correct the 3.0.0 behavior
(bsc#1192053)
- saptune_check - degraded system is no longer considered an error
(bsc#1192272)
- log missing model and vendor information to the saptune log file
(bsc#1190509)
* Mon Sep 13 2021 abriel@suse.com
- update package version of saptune to 3.0.0
This will be additional reflected in the saptune version found in
/etc/sysconfig/saptune (SAPTUNE_VERSION)
So now we will have saptune version 3
- saptune version 3
Strengthen configuration process with staging, checks of external
changes and expansion of automation to new platforms (Azure, AWS)
and hardware specifics
(jsc#SLE-21029 and jsc#SLE-20985)
- remove saptune version 1
(jsc#SLE-10823 and jsc#SLE-10842)
- remove usage of tuned from saptune
Add an own systemd service file for saptune to start/stop tuning
of parameter values during a reboot of the system.
Add a new saptune action 'service' to handle the saptune.service
supporting start/stop/enable/disable/status a.s.m.
The saptune action 'daemon', which handled tuned.service in the
past, is now flagged as 'deprecated' and internally linked to the
new action 'service'
(jsc#SLE-5589, jsc#SLE-5588, jsc#SLE-6457)
- add a sanity check to detect Note definition files which do not
exist anymore, because they were renamed or deleted, but without
reverting them before.
saptune will now print an error message, remove the Note from the
tracking variables in /etc/sysconfig/saptune and try to revert
the related parameter settings.
(bsc#1149205)
- check, if json input file is empty and handle some left-over
files from the migration from saptune v1 to saptune v2
(bsc#1167618)
- To support system parameters only relevant for specific SLES
releases, service packs and/or hardware architectures saptune
now supports 'tagged' sections inside the Note definition files.
(jsc#SLE-13246, jsc#SLE-13245)
- new kernel requirement for Power added to SAP-Note 2205917 and
2684254
SAP Note 2205917 updated to Version 61
SAP Note 2684254 updated to Version 15
(bsc#1167416)
- SAP Note 2382421 updated to Version 37
and move all 'not-well-defined' parameters from the 'reminder'
section into the 'sysctl' section, but with 'empty' values.
Use an override file to define the values fitting your system
requirements
(bsc#1170672)
- support empty parameter values in the Note definition files and
not only in the override file.
This is needed for the support of SAP Notes like 2382421, so that
the customer is able to simply use an override file to define
some special parameters instead of using a customer specific Note
definition file.
needed for bsc#1170672
(jsc#TEAM-1702)
- report an 'error' instead of 'info' and set the exit code to '1',
if we reject the apply of a solution
(bsc#1167213)
- Skip perf bias change if secure boot is enabled
When a system is in lockdown mode, i.e., Secure Boot is enabled,
MSR cannot be altered in user-space. So check, if Secure Boot is
enabled using the mokutil utility and skip setting the perf bias
in case it is.
(bsc#1176243)
- rework the internal block device handling to speed up the apply
of block device related tunings on systems with a high number of
block devices.
(bsc#1178207)
- change block device handling to handle multipath devices
correctly. Only the DM multipath devices will be used for the
settings, but not its paths.
(bsc#1179275)
- fixed wrong comparison used for setting FORCE_LATENCY
(bsc#1185702)
- add keyword 'all' to the 'rpm' section description in the man page
saptune-note(5)
(bsc#1182287)
- support note definition versions containing digits, upper-case
and lower-case letters, dots, underscores, minus and plus signs.
(bsc#1182289)
- fixed issue with 'verify' operation and parameter
'VSZ_TMPFS_PERCENT'. As this parameter is only used to calculate
the value of 'ShmFileSystemSizeMB' (if it is not set to a value
>0 in the Note definition file) it will not be checked and
compared during the saptune operation 'verify'. A footnote is
pointing this out.
(bsc#1182009)
- SAP Note 1771258 update nofile values
(bsc#1164720)
- SAP Note 2684254 updated to Version 20
SAP Note 2578899 updated to Version 39
SAP Note 1680803 updated to Version 26
- enhancements for saptune version 3
All jsc#TEAM-* entries mentioned below are related to this rework
(jsc#SLE-16972)
- Implement a lock to avoid multiple instances of saptune running
in parallel.
(jsc#TEAM-1700)
- Support for non-colorized output
If redirecting the output from saptune to a pipe, you no longer
need to deal with the 'ugly' control sequences for the colorized
output.
(jsc#TEAM-1679)
- Add enable/disable for systemd units and support all systemd unit
types in section [service]
(jsc#TEAM-1701)
- remove script /usr/share/doc/packages/saptune/sapconf2saptune
and the associated man page
(jsc#TEAM-1707)
- implement staging of Note definition file and solution
definitions.
The idea is to freeze the saptune configuration to avoid config
changes on package update when adding/removing/changing notes
or solutions within the package
(jsc#TEAM-1844)
- support custom solutions and override files for solutions.
Partners and customers will now be able to define their own
solution definitions by using files in /etc/saptune/extra
or to override the shipped solution definitions by using
override files in /etc/saptune/override
(jsc#TEAM-1706)
- support for device specific configurations
only supported for the [block] section, tags are 'vendor' and
'model' to support special block devices of a dedicated hardware
vendor or a dedicated hardware model
(jsc#TEAM-1728)
- add support for AZURE cloud (SAP Note 2993054)
(jsc#TEAM-2676)
- add support for AWS cloud (SAP Note 1656250)
(jsc#TEAM-1754 and jsc#TEAM-1755)
- add NVMe support to the block device handling to support AWS
(jsc#TEAM-2675)
- add SAP Note 3024346 (a NetApp note)
(jsc#TEAM-3454)
- rework daemon and service actions
(jsc#TEAM-3154)
- add support for 'read_ahead_kb' and 'max_sectors_kb' to the
[block] section
(jsc#TEAM-1699)
- add a warning to the reminder section of SAP Note 2382421
regarding iSCSI devices and setting of 'net.ipv4.tcp_syn_retries'
(jsc#TEAM-1705)
- for the actions 'note customise' and 'note create' check, if the
customer has changed something during the editor session.
If not, remove the temporary created note definition file.
(jsc#TEAM-825)
- add support for [sys] section
and handle double configurations for parameters defined in the
[sys] section
(jsc#TEAM-3342)
- check system sysctl config files as mentioned in the comments of
/etc/sysctl.conf and in man page sysctl.conf(5) for sysctl
parameters currently set by saptune notes. Print a warning and a
footnote for 'verify' and 'customize'.
(jsc#TEAM-1696)
- add support for [filesystem] section
only check filesystem mount options, not modify. Starting with
filesystem type 'xfs'
(jsc#TEAM-4093)
- add SAP Note 900929 for SAP Netweaver workloads.
It's the equivalent to the HANA Note 1980196.
(jsc#TEAM-4386)
- mv state files from /var/lib/saptune to /run/saptune to solve
the problem of state files surviving a reboot.
- add /sbin/saptune_check
- add the description of the solution definitions shipped with
saptune to the man page saptune(8)
(jsc#TEAM-4260)
* Tue Feb 25 2020 abriel@suse.com
- update version of saptune v2 to 2.0.3
- changes to the UserTasksMax handling in saptune
In SLE15 the limit is removed from the systemd login manager and
therefore the setting is no longer supported in SLE15 by saptune.
On a system running SLE12 we do not restart the logind service,
but try to reload the new configuration after creating or
removing the drop-in file for UserTasksMax by using
'systemctl reload-or-try-restart systemd-logind'
as display managers do not like a restart of the logind service.
(bsc#1161791)
- add commands for listing enabled Notes/Solutions to saptune
(bsc#1160564)
- correct typo in the year in the man page headline of man page
saptune-note(5)
- SAP Note 1410736 updated to Version 6
correct typo net.ipv4.tcp_probes to net.ipv4.tcp_keepalive_probes
* Tue Jan 14 2020 abriel@suse.com
- if a parameter is not supported by the system, the note action
'verify' will no longer report this as an error even if the value
is not compliant.
Additionally if there is a non compliant 'grub' parameter, which
has a compliant 'alternative' setting availabel (see man page
saptune-note(5) for details), the note action 'verify' will no
longer report this as an error
(bsc#1159671)
* Thu Jan 02 2020 abriel@suse.com
- remove no longer needed and now misleading message at the end of
note action 'revert'.
- check, if sapconf service is available before disabling this
service during 'saptune daemon start'
(bsc#1156049)
* Tue Dec 03 2019 abriel@suse.com
- add action 'delete' to the 'note' operation to delete a customer
or vendor specific Note definition file including the
corresponding override file if available.
A confirmation is needed to finish the action.
add action 'rename' to the 'note' operation to rename a customer
or vendor specific Note definition file to a new name. If a
corresponding override file is available, this file will be
renamed too. A confirmation is needed to finish the action.
If the Note is already applied, the action will be terminated
with the information, that the Note first needs to be reverted
before it can be deleted or renamed.
(jsc#SLE-9283)
* Fri Nov 08 2019 abriel@suse.com
- Inform the customer that - by intention - the command
'saptune note customise <NoteID>'
does not apply changes immediately. It just changes the
configuration in the 'override' file. These changes have to be
applied in a second step.
This is explained in the man page saptune_v2(8) and a message is
printed in the logs and on the screen to inform the customer.
(bsc#1142467)
* Thu Nov 07 2019 abriel@suse.com
- Add warning to man page, not to rename/remove/modify active
configurations
(bsc#1149002)
* Mon Oct 28 2019 abriel@suse.com
- update version of saptune v2 to 2.0.2
- support multi-queue I/O scheduler for block devices
(bsc#1152598)
* Fri Oct 04 2019 abriel@suse.com
- check, if the directory /etc/security/limits.d exists before
writing the limits drop-in file. If not, create it.
- add the '--no-pager' option to 'systemctl --list-unit-files' to
get all services at once.
- add missing search pattern to the update helper script to find all
old and superfluous notes during upgrade from SLE12 to SLE15
For the daemon operations do not exit with an error, if a note
definition file does not exist. Instead only log and print an
error message, but continue with applying the other notes
(bsc#1142526)
* Fri Jul 19 2019 abriel@suse.com
- on 12SP1 and 12SP2 the directory /etc/security/limits.d may not
exist. So create the missing directory during postinstall of the
package.
* Mon Jun 17 2019 abriel@suse.com
- update version of saptune v2 to 2.0.1
- update version of saptune v1 to 1.1.9 for migration purposes
- resetting all values to clean the system during package removal
- bugfixing saptune version 1:
fix saptune issues with /etc/security/limits.conf (bsc#1124485)
add deprecated message to the description of some notes
set scheduler for note SUSE-GUIDE-01 correctly (bsc#1123808)
No additional improvements or upgrades planned for saptune v1
For new features or current SAP Note settings please migrate to
saptune v2.
- support migration from saptune v1 to saptune v2
ship both versions of saptune in one package to support a
smooth migration controlled by the customer.
see man saptune-migrate(5) for more information
- support note name changes and note deletion during update of
saptune v2 from SLE12 to SLE15
- support different SAP Note definitions and solution definitions
related to the used operation system version
(distinguish between SLE12 and SLE15 at the moment)
- Remove calculation of optimized values, only set the values from
the configuration file irrespective of the current system value.
Current system value can be increase or decrease.
ATTENTION: saptune no longer respects higher system values.
Use the override option to change the values of the Note
definition files, if needed
(bsc#1124488)
- mark the Notes SUSE-GUIDE-01 and SUSE-GUIDE-02 as deprecated in
saptune v1 and remove these Note definitions from saptune v2
(bsc#1116799)
- add support helper script sapconf2saptune and the man page
- add new man pages saptune_v1.8, saptune_v2.8, saptune-note.5
and saptune-migrate.7
rewrite man page saptune.8
- add bash-completion for saptune
- add action 'show' to the 'note' operation to print content of
the note definition file to stdout
- add new action 'create' to support the customer/vendor while
creating a vendor or customer specific file in /etc/saptune/extra
using the template file /usr/share/saptune/NoteTemplate.conf
- simplify file name syntax for the vendor files available in
/etc/saptune/extra. Old file names still valid and supported.
Add header support (version, date, description) for the vendor
files available in /etc/saptune/extra as already available for
the note definition files in /usr/share/saptune/notes
- no longer write or remove entries from /etc/security/limits.conf.
Instead add or remove drop-in files in /etc/security/limits.d
The filename syntax for the drop-in files /etc/security/limits.d
is saptune-<domain>-<item>-<type>.conf
The limits entry syntax inside the Note definition files changed
to support more than one limits settings in the definition file
(bsc#1128322)
- preserve comment sections of the security limits file
/etc/security/limits.conf. Especially, if this is the only
content of the file.
(bsc#1124485)
- work with the current Note definition file to define the pagecache
settings and not with the default file
rename PAGECACHE_LIMIT_IGNORE_DIRTY to the correct sysctl name
vm.pagecache_limit_ignore_dirty
(bsc#1126220)
- setting of UserTaskMax is not done in the postinstall of the
package. It's now done by applying the related SAP Notes.
(bsc#1124489)
- starting to support severities INFO, WARNING, ERROR and DEBUG
for the logging and add a defined format for the log messages
- remove saptune as active tuned profile during action
'saptune daemon stop'
- start/stop services, if requested by SAP Notes, but do not
enable/disable these services
(bsc#1128325)
- adapt the parameter oriented save state file handling (store and
revert) to the special needs of the security limits parameter
(bsc#1124485)
- disable parameter settings using an override file (bsc#1124486)
- store the order of the note as they are applied to get the same
system tuning result after a system reboot as before
- correct the revert of the vm.dirty parameters by handling their
counterpart parameters in addition.
(bsc#1124487)
- adjust operation customize to the new configuration files and
override location and enable customize option for vendor and
customer specific files in /etc/saptune/extra
(bsc#1124487)
- Change output format of the operations list, verify and simulate
(bsc#1124487)
- Display footnotes during 'verify' and 'simulate'
(bsc#1124487)
- print current applied note order at the end of 'saptune note list'
and 'saptune note verify'
- remove Netweaver formula for page cache calculation. Use the
HANA approach '2% system memory' for both
- display a warning message, if a [block] section is found in the
Note definition file because on systems with a huge number of
block devices this operation may take some time
- Add force_latency handling to 'cpu' section.
Use the files in /sys/devices/system/cpu/cpu* instead of
/dev/cpu_dma_latency.
Remove the parameter from the tuned.conf file and add it to
the SAP note files '1984787' and '2205917'
- Add action 'saptune revert all' and add parameter based saved
state files to support proper revert functionality
(bsc#1124487)
- Add override file handling for the solution definition using
/etc/saptune/override/solution (bsc#1124486)
- Read solution definition from file /usr/share/saptune/solution
instead of static coding inside of saptune.
(bsc#1124486)
- tag deprecated solutions during list operation
- allow only ONE solution to be applied
- new solution definitions as discussed with SAP and Alliance team
- support solution names with '+'
- make sure a note, which is part of an applied solution definition,
but was reverted manually later, will NOT applied again after a
system reboot.
- One configuration file per SAP Note (bsc#1124486)
- add new SAP Notes and adapt content of SAP Notes
- Handle different locations of the new configuration files
(/usr/share/saptune/note, /etc/saptune/extra)
(bsc#1124486)
- Allow parameter override by the customer (bsc#1124486)
- Expand section handling of the 'ini file' handler to handle the
new configuration file entries. Supported sections:
version, reminder, login, mem, vm, block, limits, sysctl,
pagecache, cpu, service, rpm, grub
(bsc#1124486)
* Thu Jan 03 2019 abriel@suse.com
- remove new line from println arg list of main.go to support newer
go versions.
(bsc#1120741)
- update version to 1.1.8
* Thu Oct 25 2018 abriel@suse.com
- never ever stop or disable uuidd.socket in saptune (bsc#1100107)
- update version to 1.1.7
* Thu Apr 26 2018 abriel@suse.com
- correct content of /etc/systemd/logind.conf.d/sap.conf.
(bsc#1089864)
- improve error messages and exclude special block devices
from 'number of request' settings. Improve the verify option for
the block devices.
(bsc#1079599)
* Thu Feb 08 2018 gboiko@suse.com
- Fix a typo in package description. (bsc#1053374)
- Update from version 1.1.3 to 1.1.4
* Fri Dec 15 2017 abriel@suse.com
- Start to support multiqueue schedulers.
Writing a message to the log file, if a block device does not
support the choosen scheduler.
(bsc#1072562)
* Wed Dec 13 2017 abriel@suse.com
- Check, if pagecache limit is available at the system. If yes, add
SAP note 1557506 to the note list and the solution definition of
saptune. If not, skip SAP note 1557506 silently
(bsc#1071539, fate#323778)
* Mon Dec 11 2017 abriel@suse.com
- Skip using tuned-adm command inside of saptune. Instead write
'saptune' profile directly to /etc/tuned/active_profile and
enable and start the tuned service
Remove the workaround for the tuned problem with section [cpu]
(bsc#1060514)
* Fri Nov 10 2017 abriel@suse.com
- workaround for a tuned problem with section [cpu]
(bsc#1060514)
* Wed Oct 25 2017 abriel@suse.com
- support customer entries in /etc/security/limits.conf containing
values like 'unlimited' instead of an integer value.
(bsc#1060469)
- change error handling and redirect error messages to stderr instead
of stdout. (bsc#1050521)
* Fri Aug 11 2017 hguo@suse.com
- Fix a typo in package description.
(bsc#1053374)
* Tue Jun 27 2017 abriel@suse.com
- Amend logind's behaviour
(bsc#1031355, bsc#1039309, bsc#1043844)
* Fri May 12 2017 abriel@suse.com
- update man page to reflect the changes for bsc#1026172
* Thu Apr 27 2017 abriel@suse.com
- add solution SAP ASE (Sybase) and SAP Business OBJects (BOBJ)
according to fate#320359.
* Fri Mar 24 2017 abriel@suse.com
- Support of vendor specific tune files located in /etc/saptune/extra
(bsc#1026172).
* Mon Nov 14 2016 hguo@suse.com
- Tune a PowerPC little endian system in a way similar to x86 system.
Bump version to 1.0.5 to fix (bsc#1009529).
* Fri Oct 21 2016 hguo@suse.com
- Fix processing of CLI parameter "--help" (bsc#1006114).
- Fix startup failure caused by absence of sapconf package (bsc#1006187).
* Tue Aug 02 2016 hguo@suse.com
- Avoid conflicting with sysconfig path of sapconf. (bsc#988186)
Bump versin to 1.0.3.
* Fri Jul 08 2016 hguo@suse.com
- Remove conflict against sapconf to resolve
bsc#988186.
Bump version to 1.0.2.
* Mon Jul 04 2016 hguo@suse.com
- Exclusively build on X86_64 and PPC64le.
Continue with fate#320360, fate#320361, fate#320362, fate#320633.
* Fri Jun 03 2016 hguo@suse.com
- Remove ExclusiveArch.
- Control uuidd as part of the tuning process.
- Minor changes in the wording of CLI program output.
- saptune conflicts with sapconf.
- Bump version to 1.0.1.
- fate#320360, fate#320361, fate#320362, fate#320633.
* Thu Apr 28 2016 hguo@suse.com
- First revision.
Implement fate#320360, fate#320361, fate#320362, fate#320633.
/etc/logrotate.d/saptune /etc/saptune /etc/saptune/extra /etc/saptune/override /usr/lib/supportconfig /usr/lib/supportconfig/plugins /usr/lib/supportconfig/plugins/saptune /usr/lib/systemd/system/saptune.service /usr/sbin/rcsaptune /usr/sbin/saptune /usr/sbin/saptune_check /usr/share/bash-completion/completions/saptune /usr/share/fillup-templates/sysconfig.saptune /usr/share/man/man5/saptune-note.5.gz /usr/share/man/man7/saptune-migrate.7.gz /usr/share/man/man8/saptune.8.gz /usr/share/saptune /usr/share/saptune/NoteTemplate.conf /usr/share/saptune/SolutionTemplate.conf /usr/share/saptune/deprecated /usr/share/saptune/notes /usr/share/saptune/notes/1410736 /usr/share/saptune/notes/1557506 /usr/share/saptune/notes/1656250 /usr/share/saptune/notes/1680803 /usr/share/saptune/notes/1771258 /usr/share/saptune/notes/1805750 /usr/share/saptune/notes/1868829 /usr/share/saptune/notes/1980196 /usr/share/saptune/notes/1984787 /usr/share/saptune/notes/2161991 /usr/share/saptune/notes/2205917 /usr/share/saptune/notes/2382421 /usr/share/saptune/notes/2534844 /usr/share/saptune/notes/2993054 /usr/share/saptune/notes/3024346 /usr/share/saptune/notes/900929 /usr/share/saptune/notes/941735 /usr/share/saptune/notes/SAP_BOBJ /usr/share/saptune/schemas /usr/share/saptune/schemas/1.0 /usr/share/saptune/schemas/1.0/saptune_check.schema.json /usr/share/saptune/schemas/1.0/saptune_daemon_start.schema.json /usr/share/saptune/schemas/1.0/saptune_daemon_status.schema.json /usr/share/saptune/schemas/1.0/saptune_daemon_stop.schema.json /usr/share/saptune/schemas/1.0/saptune_help.schema.json /usr/share/saptune/schemas/1.0/saptune_invalid.schema.json /usr/share/saptune/schemas/1.0/saptune_lock_remove.schema.json /usr/share/saptune/schemas/1.0/saptune_log_set.schema.json /usr/share/saptune/schemas/1.0/saptune_log_status.schema.json /usr/share/saptune/schemas/1.0/saptune_note_applied.schema.json /usr/share/saptune/schemas/1.0/saptune_note_apply.schema.json /usr/share/saptune/schemas/1.0/saptune_note_create.schema.json /usr/share/saptune/schemas/1.0/saptune_note_customise.schema.json /usr/share/saptune/schemas/1.0/saptune_note_customize.schema.json /usr/share/saptune/schemas/1.0/saptune_note_delete.schema.json /usr/share/saptune/schemas/1.0/saptune_note_edit.schema.json /usr/share/saptune/schemas/1.0/saptune_note_enabled.schema.json /usr/share/saptune/schemas/1.0/saptune_note_list.schema.json /usr/share/saptune/schemas/1.0/saptune_note_rename.schema.json /usr/share/saptune/schemas/1.0/saptune_note_revert.schema.json /usr/share/saptune/schemas/1.0/saptune_note_revert_all.schema.json /usr/share/saptune/schemas/1.0/saptune_note_revertall.schema.json /usr/share/saptune/schemas/1.0/saptune_note_show.schema.json /usr/share/saptune/schemas/1.0/saptune_note_simulate.schema.json /usr/share/saptune/schemas/1.0/saptune_note_verify.schema.json /usr/share/saptune/schemas/1.0/saptune_revert_all.schema.json /usr/share/saptune/schemas/1.0/saptune_service_apply.schema.json /usr/share/saptune/schemas/1.0/saptune_service_disable.schema.json /usr/share/saptune/schemas/1.0/saptune_service_disablestop.schema.json /usr/share/saptune/schemas/1.0/saptune_service_enable.schema.json /usr/share/saptune/schemas/1.0/saptune_service_enablestart.schema.json /usr/share/saptune/schemas/1.0/saptune_service_reload.schema.json /usr/share/saptune/schemas/1.0/saptune_service_restart.schema.json /usr/share/saptune/schemas/1.0/saptune_service_revert.schema.json /usr/share/saptune/schemas/1.0/saptune_service_start.schema.json /usr/share/saptune/schemas/1.0/saptune_service_status.schema.json /usr/share/saptune/schemas/1.0/saptune_service_stop.schema.json /usr/share/saptune/schemas/1.0/saptune_service_takeover.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_applied.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_apply.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_change.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_create.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_delete.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_edit.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_enabled.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_list.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_rename.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_revert.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_show.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_simulate.schema.json /usr/share/saptune/schemas/1.0/saptune_solution_verify.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_analysis.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_diff.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_disable.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_enable.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_is-enabled.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_list.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_release.schema.json /usr/share/saptune/schemas/1.0/saptune_staging_status.schema.json /usr/share/saptune/schemas/1.0/saptune_status.schema.json /usr/share/saptune/schemas/1.0/saptune_version.schema.json /usr/share/saptune/scripts /usr/share/saptune/scripts/.updhelp /usr/share/saptune/scripts/upd_helper /usr/share/saptune/sols /usr/share/saptune/sols/BOBJ.sol /usr/share/saptune/sols/HANA.sol /usr/share/saptune/sols/MAXDB.sol /usr/share/saptune/sols/NETWEAVER+HANA.sol /usr/share/saptune/sols/NETWEAVER+MAXDB.sol /usr/share/saptune/sols/NETWEAVER.sol /usr/share/saptune/sols/S4HANA-APP+DB.sol /usr/share/saptune/sols/S4HANA-APPSERVER.sol /usr/share/saptune/sols/S4HANA-DBSERVER.sol /usr/share/saptune/sols/SAP-ASE.sol /var/lib/saptune /var/lib/saptune/staging /var/lib/saptune/staging/latest /var/lib/saptune/working /var/lib/saptune/working/notes /var/lib/saptune/working/sols /var/log/saptune
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Nov 12 00:02:43 2024