| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: smartmontools | Distribution: openSUSE:Leap:15.2:PowerPC / ports |
| Version: 7.0 | Vendor: openSUSE |
| Release: lp152.1.4 | Build date: Sat May 16 13:05:16 2020 |
| Group: Hardware/Other | Build host: obs-power8-04 |
| Size: 2482638 | Source RPM: smartmontools-7.0-lp152.1.4.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://www.smartmontools.org/ | |
| Summary: Monitor for SMART devices | |
SMARTmontools controls and monitors storage devices using the Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.) built into ATA, SATA and SCSI Hard Drives. This is used to check the hard drive reliability and to predict drive failures. The suite contains two utilities. The first, smartctl, is a command line utility designed to perform simple S.M.A.R.T. tasks. The second, smartd, is a daemon that periodically monitors the smart status and reports errors to syslog. The package is compatible with the ATA/ATAPI-3 to -7 specification. The package is intended to incorporate as much "vendor specific" and "reserved" information as possible about disk drives. The commands man smartctl and man smartd will provide more information.
GPL-2.0-or-later
* Tue Aug 06 2019 sbrabec@suse.com
- Fix license of nvme_ioctl.h
(https://www.smartmontools.org/ticket/1226,
smartmontools-nvme_ioctl_h-license.patch).
* Tue Jun 04 2019 rw@suse.com
- Update to 7.0 version
- smartctl
* New options '-j' and '--json[=giosu]' to enable experimental
JSON output mode. Also supports an alternative flat format
suitable for grep ('--json=g').
* '-l devstat': Fix for logs with 256 sectors.
* '-l error': Prints SCSI Pending Defects log page if supported.
* '-H': Prints SCSI Format Status log page if supported.
* '-x': Now includes '-l defects'.
* New option '-d scsi+TYPE' to disable SAT auto detection for
'aacraid' and 'cciss'.
- NVMe/USB: Device type '-d sntjmicron' for NVMe drives behind
JMicron USB to NVMe bridges.
- NVMe: SMART/Health Information and Error Information are always
read with broadcast NSID.
- SCSI: Various improvements for the decoding of log pages.
- SCSI: Improved handling of READ CAPACITY command.
- SCSI: Support for SAS host managed drives.
- update-smart-drivedb: New option '-u github'.
- update-smart-drivedb: New signing key.
- HDD, SSD and USB additions to drive database.
- Always use '-d sat' for USB vendor IDs with known SAT support.
- Linux
* Device scan with '-d by-id' scans '/dev/disk/by-id/*' symlinks.
* Dropped device scan support for devfs.
* Fixed device scan with multiple '-d TYPE' options.
* Fixed device scan crash on missing '/proc/devices'.
* USB ID detection also for '/dev/sgN'.
* smartd: Could now run as systemd service with 'Type=notify' set.
- Drop upstreamed patches:
* smartmontools-scsiata-scsi_only.patch
* smartmontools-systemd-no-syslog.patch
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_7_0_DRIVEDB.
* Tue Sep 25 2018 sbrabec@suse.com
- Fix smartd.service EnvironmentFile (boo#1095662).
* Fri Jun 22 2018 kukuk@suse.de
- Add smartd_generate_opts.path and smartd_generate_opts.service
to update smartd_opts if sysconfig is modified. Needed for
[FATE#325524].
* Tue Apr 17 2018 sbrabec@suse.com
- Fix SUSE default of S.M.A.R.T. checks: really enable nightly
short tests (bsc#1073918).
* Thu Feb 08 2018 sbrabec@suse.com
- Make possible to disable broken SAT support by -d scsi+cciss,N
(bsc#1038271, smartmontools-scsiata-scsi_only.patch,
https://www.smartmontools.org/ticket/871).
- Update smartmontools.keyring.
* Mon Dec 18 2017 avindra@opensuse.org
- update to 6.6 version (FATE#321901, FATE#322874)
- smartctl:
* -i' and '--identify': ATA ACS-4 and SATA 3.3 enhancements.
* Control ATA write cache through SCT Feature Control
with '-s wcache-sct,ata|on|off[,p]' and '-g wcache-sct'.
* Print ATA Pending Defects log with '-l defects'.
* '-s wcreorder,on|off': New persistent flag ',p'.
* '-s standby': Prevent temporary drive spinup.
* '-n POWERMODE': New parameter to set exit status.
* '-g security': ATA Security Level check fixed.
* '-l scttemp*': Print minimum supported ERC Time Limit.
* '-q noserial': Now also suppresses "SAS address" output.
* '-i': Print IEEE EUI-64 of NVMe namespace.
* '-c': Print NVMe 1.3 feature flags.
* '-A': Print NVMe 1.3 thermal temperature transition
statistic.
* '-g/s dsn': Get/set ATA DSN.
- smartd
* Uses also device identify information to detect for duplicate
devices.
* '-e dsn' directive: Set ATA DSN.
* Improved SCSI/SAS temperature logging.
* Silence emails and log messages on open errors of
'-d removable' devices.
* Exit on device open error unless '-q never' or '-d removable'
is specified (regression).
- update-smart-drivedb: Now authenticates downloaded file with GnuPG.
- update-smart-drivedb: New options '--trunk', '--no-verify' and
'--export-key'.
- Device type '-d intelliprop,N' for IntelliProp controllers.
- SCSI: Default timeout increased to 1 minute.
- HDD, SSD and USB additions to drive database.
- New smartmontools-* mailing list addresses.
- Man page formatting reworked.
- Linux:
* Uses SG_IO V4 API if supported.
* Devices behind hpsa driver are no longer detected as regular
SCSI devices.
- switch to new url
- drop upstreamed patches:
* smartmontools-scsi-suppress-no-temperature.patch
* smartmontools-scsi-temperature-check.patch
* smartmontools-log-scsi-temperature.patch
- regen smartmontools-drivedb.h
* Thu Nov 23 2017 rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
* Fri Jul 14 2017 sbrabec@suse.com
- SCSI temperature error fixes (bsc#1047198,
smartmontools-scsi-suppress-no-temperature.patch,
smartmontools-scsi-temperature-check.patch,
smartmontools-log-scsi-temperature.patch).
* Mon Dec 19 2016 sbrabec@suse.com
- Drop systemd dependency on syslog.target (bsc#983938,
smartmontools-systemd-no-syslog.patch).
https://lists.opensuse.org/opensuse-packaging/2013-05/msg00102.html
* Wed Dec 07 2016 aginies@suse.com
- update to 6.5 version
* Experimental support for NVMe devices on FreeBSD, Linux and Windows.
* smartctl '-i', '-c', '-H' and '-l error': NVMe support.
* smartctl '-l nvmelog': New option for NVMe.
* smartd.conf '-H', '-l error' and '-W': NVMe support.
* Optional NVMe device scanning support on Linux and Windows.
* configure option '--with-nvme-devicescan' to include NVMe in
default device scanning result.
* Device scanning now allows to specify multiple '-d TYPE' options.
* ATA: Added new POWER MODE values introduced in ATA ACS-2.
* ATA: SCT commands are no longer issued if ATA Security is locked.
* SCSI: LB provisioning improvements.
* SCSI: Fixed GLTSD bit set/cleared info messages.
* SCSI: Solid State media log page is no longer checked for tapes.
* SCSI: Improved handling when no tape cartridge in drive.
* SCSI: Workaround for buggy Seagate firmware.
* SAT: Improved heuristics to detect bogus sense data from SAT layer.
* smartd: Fixed crash on missing argument to '-s' directive.
update-smart-drivedb: Now uses HTTPS for download by default.
* update-smart-drivedb: New options to select URL and download tool.
* update-smart-drivedb: New download tool 'svn'.
* Drive database file now also includes the DEFAULT setting
for each attribute.
* HDD, SSD and USB additions to drive database.
* Various code changes suggested by Clang Static Analyser and Cppcheck.
- enable "--with-nvme-devicescan" option
- update smartmontools-drivedb.h file
- use --with-savestates, --with-attributelog, --docdir instead of old options
* Thu Jan 14 2016 meissner@suse.com
- replaced keyring with 2015/2016 key.
pub rsa2048/0xDF0F1A49C4A4903A 2014-12-31 [expires: 2016-12-31]
Key fingerprint = F41F 01FC 0784 4958 4FFC CF57 DF0F 1A49 C4A4 903A
uid [ unkown] Smartmontools Signing Key (through 2016) <smartmontools-support@lists.sourceforge.net>
* Sun Jan 10 2016 p.drouand@gmail.com
- Update to version 6.0.4
* Device type '-d usbprolific' for Prolific PL2571/277x USB bridges.
* SAT: Support for ATA registers returned in fixed format sense data.
* smartctl '-i' and '--identify': ATA ACS-4 and SATA 3.2 enhancements.
* smartctl '-l xerror': Support for logs with more than 255 pages.
* smartctl '-l devstat': Prints ACS-3 DSN flags.
* smartctl '-l devstat': Read via SMART command if GP log is not
available.
* smartctl '-l scttempsts': Prints SCT SMART STATUS (ACS-4) and
vendor specific SCT bytes.
* HDD, SSD and USB additions to drive database.
* Linux: AACRAID fixes, SMART STATUS should work now.
* Linux: '/dev/megaraid_sas_ioctl_node' fd leak fix.
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_6_4_DRIVEDB.
- Cleanup and remove conditional macros; the package doesn't build
for SLE anyway
- Remove smartmontools-default-enabled.patch; not needed anymore
* Tue Mar 10 2015 sbrabec@suse.cz
- Run Self Tests:
* Short Self Test every night
* Extended Self Test every month
* Discussion:
http://lists.opensuse.org/opensuse-factory/2015-03/msg00040.html
- Dropped smartmontools-removable.patch
- Created smartmontools-suse-default.patch
* Mon Mar 09 2015 sbrabec@suse.cz
- Package empty /etc/smartd_warning.d for warning plugins.
- smartmontools-drivedb_h-update.sh: Fix default branch name.
- Comment fixes.
* Tue Mar 03 2015 sbrabec@suse.cz
- Improve drivedb.h update scriptlets: Detect update across
branches.
- Check state of smartmontools-drivedb.h in %prep.
- Add ghost records for files created by update-smart-drivedb.
- Improve smartmontools-drivedb_h-update.sh script: Perform spec
file changess.
- Clean up on uninstall.
- Update smartmontools-drivedb.h to the latest version from the
upstream branch RELEASE_6_3_DRIVEDB.
* Fri Nov 14 2014 dimstar@opensuse.org
- No longer perform gpg validation; osc source_validator does it
implicit:
+ Drop gpg-offline BuildRequires.
+ No longer execute gpg_verify.
/etc/smart_drivedb.h /etc/smartd.conf /etc/smartd_warning.d /etc/smartd_warning.sh /usr/lib/smartmontools /usr/lib/smartmontools/generate_smartd_opts /usr/lib/systemd/system/smartd.service /usr/lib/systemd/system/smartd_generate_opts.path /usr/lib/systemd/system/smartd_generate_opts.service /usr/sbin/rcsmartd /usr/sbin/smartctl /usr/sbin/smartd /usr/sbin/update-smart-drivedb /usr/share/doc/packages/smartmontools /usr/share/doc/packages/smartmontools/AUTHORS /usr/share/doc/packages/smartmontools/COPYING /usr/share/doc/packages/smartmontools/ChangeLog /usr/share/doc/packages/smartmontools/ChangeLog-5.0-6.0 /usr/share/doc/packages/smartmontools/NEWS /usr/share/doc/packages/smartmontools/README /usr/share/doc/packages/smartmontools/TODO /usr/share/doc/packages/smartmontools/examplescripts /usr/share/doc/packages/smartmontools/examplescripts/Example1 /usr/share/doc/packages/smartmontools/examplescripts/Example2 /usr/share/doc/packages/smartmontools/examplescripts/Example3 /usr/share/doc/packages/smartmontools/examplescripts/Example4 /usr/share/doc/packages/smartmontools/examplescripts/Example5 /usr/share/doc/packages/smartmontools/examplescripts/Example6 /usr/share/doc/packages/smartmontools/examplescripts/README /usr/share/doc/packages/smartmontools/smartd.conf /usr/share/fillup-templates/sysconfig.smartmontools /usr/share/man/man5/smartd.conf.5.gz /usr/share/man/man8/smartctl.8.gz /usr/share/man/man8/smartd.8.gz /usr/share/man/man8/update-smart-drivedb.8.gz /usr/share/smartmontools /usr/share/smartmontools/drivedb.h /usr/share/smartmontools/drivedb.h.error /usr/share/smartmontools/drivedb.h.lastcheck /usr/share/smartmontools/drivedb.h.old /var/lib/smartmontools /var/lib/smartmontools/smartd_opts
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 11:51:01 2024