brickd-2.4.5-1.1 RPM for riscv64

From OpenSuSE Ports Tumbleweed for riscv64

Brick Daemon is a small bridge between the USB port of Bricks and
the TCP/IP socket connection to the language binding APIs.

Provides

• brickd
• brickd(riscv-64)
• config(brickd)

Requires

• /bin/sh
• /bin/sh
• /bin/sh
• /bin/sh
• config(brickd) = 2.4.5-1.1
• ld-linux-riscv64-lp64d.so.1()(64bit)
• ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.27)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libusb-1.0.so.0()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-only

Changelog

* Fri Dec 01 2023 Frank Kunz <mailinglists@kunz-im-inter.net>
  - New Version 2.4.5
    - Add Raspberry Pi 5 support for HAT (Zero) Brick
    - Fix rare crash in initial USB device scan
* Mon Aug 21 2023 Frank Kunz <mailinglists@kunz-im-inter.net>
  - Fix build error with conflicting strcasestr definition
* Thu Jan 26 2023 Frank Kunz <mailinglists@kunz-im-inter.net>
  - Fixed brickd-rpmlintrc source reference in spec file
    removed upstream patch a679ca31b8dbd412e5f379b624200e3a96dda0ce.patch
* Wed Jan 25 2023 Frank Kunz <mailinglists@kunz-im-inter.net>
  - New Version 2.4.4
    - Add menu entry to clear Live Log in Windows Log Viewer
    - Abort delayed USB stall recovery if device was removed in the meantime
    - Add rate limit for Bricklet error messages
    - Increase libusb requirement from 1.0.6 to 1.0.20
    - Allow to disable mesh gateway
    - Update bundled libusb to 1.0.26.11755 on Windows (Windows Vista or newer
      required) and macOS
* Wed Feb 23 2022 Dirk Müller <dmueller@suse.com>
  - add a679ca31b8dbd412e5f379b624200e3a96dda0ce.patch for RISCV support
  - spec-cleaner
* Wed Aug 25 2021 Johannes Segitz <jsegitz@suse.com>
  - Added hardening to systemd service(s). Added patch(es):
    * harden_brickd-resume.service.patch
    * harden_brickd.service.patch
* Thu Dec 10 2020 Frank Kunz <mailinglists@kunz-im-inter.net>
  - Update to new upstream version 2.4.3:
  - Properly shutdown subsystems on Ctrl+C instead of abruptly exiting on Windows
  - Rotate persistent log file on Windows and limit its total size to 25 MB
  - Add commandline options to override log and config file location on Windows
  - Colorize Log Viewer live log messages on Windows
  - Reword Log Viewer messages to be less ambiguous on Windows
  - Add build option to work without a device file manager such as udevd on Linux
  - Allow to handle more then 6 USB devices on Windows
  - Use BCM2835 library for SPI connected Bricklets on Raspberry Pi to improve
    performance and work around SPI chip select conflict between Linux kernel 5.4
    and HAT Brick firmware < 2.0.2
  - Improve log messages related to HAT (Zero) Brick on Linux
  - Fix SPI hardware chip select usage on Linux
  - Allow to fully static link brickd for Docker container usage on Linux
  - Switch Debian package build to debhelper and drop SysV init support
  - Improve USB transfer error logging and stall error recovery
  - Fix SPI clock for HAT (Zero) Brick on Linux, if core_freq differs from 250 MHz
  - Add config option to override SPI backend detection
* Sun Jan 05 2020 Frank Kunz <mailinglists@kunz-im-inter.net>
  - Update to new upstream version 2.4.1:
  - Rename bundled libusb to avoid potential collision with system libusb on macOS
  - Add missing network dependency to systemd service on Linux
  - Make sleep time between SPI reads for HAT (Zero) Brick configurable
  - Add experimental support for HAT (Zero) Brick (SPI connected Bricklets) on
    Windows 10 IoT Core, disabled by default due to missing HAT detection
  - Notarize Brick Daemon app to make it ready for macOS 10.15
  - remove integrated upstream patches
    0001-Makefile-Support-DESTDIR-variable.patch
    0001-use-RPM_OPT_FLAGS-in-rpm-package-builds.patch
    0001-systemd-unit-files-are-always-in-prefix-lib-systemd.patch
* Mon Sep 30 2019 Frank Kunz <frank@kunz-im-inter.net>
  - added doc files
* Wed Sep 25 2019 Ludwig Nussel <lnussel@suse.de>
  - use download_files in disabled mode to make the package suitable for
    inclusion in the distro
  - buildrequire pkgconfig files to OBS chooses the right package
  - backport DESTDIR support (0001-Makefile-Support-DESTDIR-variable.patch)
  - use optflags for compiling
    (0001-use-RPM_OPT_FLAGS-in-rpm-package-builds.patch)
  - fix path of systemd unit files in the Makefile already
    (0001-systemd-unit-files-are-always-in-prefix-lib-systemd.patch)

Files

/etc/brickd.conf
/etc/logrotate.d/brickd
/usr/bin/brickd
/usr/lib/systemd/system/brickd-resume.service
/usr/lib/systemd/system/brickd.service
/usr/sbin/rcbrickd
/usr/sbin/rcbrickd-resume
/usr/share/doc/packages/brickd
/usr/share/doc/packages/brickd/README.rst
/usr/share/doc/packages/brickd/changelog
/usr/share/man/man5/brickd.conf.5.gz
/usr/share/man/man8/brickd.8.gz

Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Apr 29 23:57:36 2024