| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: fwupd-devel | Distribution: openSUSE Leap 15.2 |
| Version: 1.2.14 | Vendor: openSUSE |
| Release: lp152.3.9.1 | Build date: Thu Apr 8 12:19:20 2021 |
| Group: Development/Languages/C and C++ | Build host: armbuild02 |
| Size: 1520330 | Source RPM: fwupd-1.2.14-lp152.3.9.1.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: https://fwupd.org/ | |
| Summary: Allow session software to update device firmware | |
fwupd is a daemon to allows session software to update device firmware on the local machine.
GPL-2.0-or-later AND LGPL-2.1-or-later
* Tue Mar 30 2021 Gary Ching-Pang Lin <glin@suse.com>
- Update to version 1.2.14: (jsc#SLE-16809, bsc#1182057)
* Release fwupd 1.2.14
* Fix using a very new libxmlb with a very old fwupd daemon
* uefi-capsule: Specify the section flags for .sbat
* uefi-capsule: Ensure SBAT metadata is added correctly
* uefi-capsule: Set the component generation to 1
* uefi-capsule: Include all the sections when using objcopy
* Allow building without SBAT metadata
* uefi-capsule: Fix objcopy failing to add a .sbat section on
aarch64
* uefi-capsule: Add SBAT metadata to the fwupd EFI binary
* uefi: add configuration option for objcopy utility.
* uefi: Make generate_binary.sh more robust
* efi: use a wildcard section copy for final EFI generation
* Fix the DeviceID set by GetDetails
* synaptics-prometheus: Force the minor version from 0x02 to 0x01
to make sure the devices can be updated back to 0x01.
* Validate that gpgme_op_verify_result() returned at least one
signature (boo#1172643 CVE-2020-10759)
* trivial: uefi: fix dell TPM updates
* prevent updates to occur via synaptics-mst plugin
* upower: Decrease minimum battery requirement to 10%
* src: fu-engine: check version was updated by checking version
* Correctly import PKCS-7 remote metadata
* Disable the battery percentage checks if UPower is unavailable
* efi: use a wildcard section copy for final EFI generation
* fu-engine: Read all releases and convert versions when
comparing
* Do not do semver conversion in fu_common_vercmp()
* unifying: use the correct timeout for IO channel writes
* Only check the vendor ID if the device has one set
* wacom-raw: Correct HWID support
* modem-manager: increase re-enumeration delay to 20000ms
* modem-manager: add counterpart GUID for the DW5821e/eSIM
* usb: make loading vendor/product/serial strings non-fatal
* Strip trailing whitespace from USB descriptors
* udev-device: fix offset of vendor id of hidraw devices
* thunderbolt-power: avoid checking for bolt support
* modem-manager: Fix a tiny memory leak when starting the daemon
* Fix usage of incorrect type for return value
* fu-common: Use environment variables for systemd managed
directories
* Use more systemd directives for directories
- Specify the SBAT metadata (bsc#1182057)
- Drop upstreamed patch: CVE-2020-10759.patch
* Mon Sep 07 2020 QK ZHU <qkzhu@suse.com>
- Add fwupd-jscSLE-11766-close-efidir-leap-gap.patch: Set SLE and
openSUSE esp os dir at runtime (jsc#SLE-11766)
- Drop build option -Defi_os_dir="%{efidir}": with the above patch
fwupd can detect esp os dir dynamically
- Update the efidir related %post and %postun scripts in spec file
* Tue Jun 09 2020 Michael Gorse <mgorse@suse.com>
- Add CVE-2020-10759.patch: check for a valid gpg signature
(boo#1172643 CVE-2020-10759).
* Thu Nov 21 2019 Frederic Crozat <fcrozat@suse.com>
- Ensure /var/cache/fwupd is created and owned by package,
required when StateDirectory is not set for systemd service.
* Thu Nov 14 2019 glin@suse.com
- Update to version 1.2.11 (jsc#SLE-10751):
* synapticsmst: Use a more suitable icon for the device
* thunderbolt: Fix logic to work properly with ICL thunderbolt
controller
* Do not ask the user to upload a report if ReportURI is not set
* Do not crash when starting tpm2-abrmd
* fu-history: Update device_modified in sql database during
updates
* synaptics-prometheus: Fix tiny memory leak when using
FuSynapromConfig
* Remove replug flag after the device comes back from reboot
* uefi: add support for tpm2-tools 4.X
* fu-engine/fu-config: Reload metadata store when configuration
changes
* unifying: update Solaar url
* synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock
* synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock
* synapticsmst: Display the board ID in non-hex form in the error
message
* Be more accepting when trying to recover a failed database
migration
* modem-manager: add counterpart GUID for the DW5821e
* fu-tool: Port ability to update a single device from fwupdmgr
* uefi: Actually write the new device path if different than
before
* Fix a crash when stopping the fwupd service
* Relax the certificate time checks in the self tests for the
legacy certificate
* Never show AppStream markup on the console
* Do not segfault when trying to quit the downgrade selection
* Allow specifying <firmware>GUID</firmware> to check any version
exists
- Add fwupd-bsc1130056-change-shim-path.patch to set the default
shim binary for openSUSE/SLE (bsc#1130056)
- Add fwupd-bsc1143905-hash-the-source-files.patch to hash the
source files instead of libfwupdprivate.a to avoid the checksum
change due to the random naming LTO profile sections
(bsc#1143905)
- Mark fwupdate as obsolete
+ fwupdate has been merged into fwupd since fwupd 1.1.0.
* Fri Sep 21 2018 fezhang@suse.com
- Update to version 1.0.9 (FATE#326702):
+ New Features:
- Add support for more Wacom tablets.
- Add support for the Synaptics Panamera chip.
- Add validation for Titan Ridge Thunderbolt devices.
- Use boltd force power API if available.
+ Bugfixes:
- Allow flashing Unifying devices in recovery mode.
- Allow updating just one specific device from the commandline.
- Do not hold hidraw devices open forever.
- Do not use 8bitdo bootloader commands after a successful
flash.
- Don't crash when the Dell alternate device has not been set.
- Don't potentially expose user passwords for remotes.
- Fix a potential buffer overflow when applying a DFU patch.
- Fix a potential segfault in smbios data processing.
- Fix downgrading older releases to devices.
- Fix failure to detach Unifying devices when using a slow host
controller.
- Fix flashing devices that require a manual replug.
- Handle -EAGAIN from the kernel better when reading NVM.
- Drop enable_pkcs7_when_testing_only.patch: fixed upstream.
* Mon Sep 10 2018 Jan Engelhardt <jengelh@inai.de>
- Use noun phrase for summary. Trim request for comments from
description.
* Wed Jul 25 2018 tchvatal@suse.com
- Run %udev_rules_update in post as package install udev rules
* Wed Jul 11 2018 oliver@getspam.de
- Update to version 1.0.8:
+ New Features (including version 1.0.7):
- Add an plugin to update some future Wacom tablets
- Add 'fwupdmgr get-topology' to show logical device tree
- Add support for creating a flatpak
- Add support for creating a snap
- Add support for Motorola S-record files
- Add the Linux Foundation public GPG keys for firmware and metadata
- Show a translated warning when the server is limiting downloads
- Add enable-remote and disable-remote commands to fwupdmgr
- Add fu_plugin_add_compile_version() for libraries to use
- Allow requiring specific versions of libraries for firmware updates
- If no remotes are enabled try to enable the LVFS
- Show a warning with interactive prompt when enabling a remote
+ Bugfixes (including version 1.0.7):
- Add a firmware diagnostic tool called fwupdtool
- Adjust all licensing to LGPL 2.1+
- Allow installing more than one firmware using 'fwupdmgr install'
- Allow specifying hwids with OR relationships
- Do not call fu_plugin_init() on blacklisted plugins
- Do not require libcolorhug to build
- Fix a crash in libfwupd where no device ID is set
- Fix a potential DoS in libdfu by limiting holes to 1MiB
- Fix a segfault that sometimes occurs during cleanup of USB plugins
- Fix Hardware-ID{0,1,2,12} compatibility with Microsoft
- Hide devices that aren't updatable by default in fwupdmgr
- Search all UEFI GUIDs when matching hardware
- Stop matching Nintendo Switch Pro in the 8bitdo plugin
- Check that EFI system partition is mounted before update
- Disable synapticsmst remote control on failure
- Don't recoldplug thunderbolt to fix a flashing failure
- Fix SQL error when running 'fwupdmgr clear-offline'
- Improve the update report message
- Only enumerate Dell Docks if the type is known
- Only run certtool if a new enough gnutls is present
- Prevent a client crash if the daemon somehow sends invalid data
- Reboot after scheduling using logind not systemd
- Use the right encoding for the label in make-images
- Added/backported enable_pkcs7_when_testing_only.patch:
+ needed to disable pkcs7 test during build (can be removed for
fwupd >= 1.0.9)
* Wed Apr 04 2018 dimstar@opensuse.org
- Update hasbang in installed files from /usr/bin/env python3 to
/usr/bin/python3.
* Tue Apr 03 2018 mpluskal@suse.com
- Update url
- Small packaging cleanup with spec-cleaner
* Fri Mar 23 2018 antoine.belvire@opensuse.org
- Update to version 1.0.6:
+ New Features:
- Add bash completion for fwupdmgr.
- Add support for newest Thunderbolt chips.
- Allow all functions that take device arguments to be
prompted.
- Allow devices to use the runtime version when in bootloader
mode.
- Allow overriding ESP mount point via conf file.
- Delete any old fwupdate capsules and efivars when launching
fwupd.
- Generate Vala bindings.
+ Bugfixes:
- Allow ctrl-d out of the prompt for devices.
- Allow to create package out of provided binary.
- Correct handling of unknown Thunderbolt devices.
- Correctly detect new remotes that are manually copied.
- Fix a crash related to when passing device to downgrade in
CLI.
- Fix running the self tests when no fwupd is installed.
- Fix Unifying signature writing and parsing for Texas
bootloader.
- Only send success and failure reports to the server.
- Use a CNAME to redirect to the correct CDN for metadata.
- Use a longer timeout when powering back the Thunderbolt
device.
- Add pkgconfig(bash-completion) BuildRequires: new dependency.
* Thu Mar 15 2018 fcrozat@suse.com
- Ensure library package has a dependency on main package,
otherwise it won't be usable.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.5:
+ New Features:
- Offer to reboot when processing an offline update.
- Report the efivar, libsmbios and fwupdate library versions.
- Report Thunderbolt safe mode and SecureBoot status.
- Show the user a URL when they report a known problem.
- Support split cabinet archives as produced by Windows Update.
+ Bugfixes:
- Be more careful deleting and modifying device history.
- Clarify which devices don't have upgrades.
- Ensure the Thunderbolt version is xx.yy.
- Fix a daemon warning when using fwupdmgr get-results.
- Fix crasher with MST flashing.
- Fix DFU detach with newer releases of libusb.
- Include the device VID and PID when generating the device-id.
- Set the RemoteId when using GetDetails.
- Stop matching 8bitdo DS4 controller VID/PID.
- Use help2man for dfu-tool and drop docbook dependencies.
- Use ngettext for any strings with plurals.
- Use the default value if ArchiveSizeMax is unspecified.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.4:
+ New Features:
- Add D-Bus methods to get and modify the history information.
- Allow the user to share firmware update success or failure.
- Ask the user to refresh metadata when it is very old.
- Store firmware update success and failure to a local
database.
+ Bugfixes:
- Add a device name for locked UEFI devices.
- Allow each plugin to opt-in to the recoldplug action.
- Fix firmware downloading using gnome-software.
- Fix UX capsule reference to the one specified in efivar.
- Never add two devices to the daemon with the same ID.
- Rescan supported flags when refreshing metadata.
- Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.
* Mon Mar 05 2018 dimstar@opensuse.org
- Update to version 1.0.3:
+ New Features:
- Add a new plugin to add support for CSR "Driverless DFU".
- Add initial SF30/SN30 Pro support.
- Support AppStream metadata with relative <location> URLs.
+ Bugfixes:
- Add more metadata to the user-agent string.
- Block owned Dell TPM updates.
- Choose the correct component from provides matches using
requirements.
- Do not try to parse huge compressed archive files.
- Fix a double-free bug in the Udev code.
- Handle Thunderbolt "native" mode.
- Use the new functionality in libgcab >= 1.0 to avoid writing
temp files.
* Thu Dec 21 2017 stefan.bruens@rwth-aachen.de
- Unbreak compilation on non-x86, upstream renamed options to disable
plugins.
* Tue Dec 19 2017 fcrozat@suse.com
- Update to version 1.0.2:
+ Add a plugin for the Nitrokey Storage device
+ Add support for the original AVR DFU protocol
+ Allow different plugins to claim the same device
+ Allow quirks to set common USB properties
+ Move a common plugin functionality out to a new shared object
+ Optionally delay the device removal for better replugging
+ Set environment variables to allow easy per-plugin debugging
+ Use a SHA1 hash for the internal DeviceID
+ Add quirk for AT32UC3B1256 as used in the RubberDucky
+ Disable the dell plugin if libsmbios fails
+ Don't register for USB UDev events to later ignore them
+ Fix a possible buffer overflow when debugging ebitdo devices
+ Fix critical warning when more than one remote fails to load
+ Fix DFU attaching AVR32 devices like the XMEGA
+ Ignore useless Thunderbolt device types
+ Refactor ColorHug into a much more modern plugin
+ Release the Steelseries interface if getting the version failed
+ Remove autoconf-isms from the meson configure options
+ Show a nicer error message if the requirement fails
+ Sort the output of GetUpgrades correctly
- Changes from version 1.0.1:
+ Add support for HWID requirements
+ Add support for programming various AVR32 and XMEGA parts using DFU
+ Add the various DFU quirks for the Jabra Speak devices
+ Allow specifying the output file type for 'dfu-tool read'
+ Move the database of supported devices out into runtime loaded files
+ Support the IHEX record type 0x05
+ Use help2man to generate the man page at build time
+ Use the new quirk infrastructure for version numbers
+ Catch invalid Dell dock component requests
+ Correctly output Intel HEX files with > 16bit offset addresses
+ Do not try to verify the element write if upload is unsupported
+ Fix a double-unref when updating any 8Bitdo device
+ Fix crash when enumerating with Dell dock connected but with no UEFI
+ Fix uploading large firmware files over DFU
+ Format the BCD USB revision numbers correctly
+ Guess the DFU transfer size if it is not specified
+ Include the reset timeout as wValue to fix some DFU bootloaders
+ Make the error message clearer when sans fonts are missing
+ Support devices with truncated DFU interface data
+ Use the correct remote-specified username and passord when using fwupdmgr
+ Use the correct wDetachTimeOut when writing DFU firmware
+ Verify devices with legacy VIDs are actually 8Bitdo controllers
- Add help2man as BuildRequires.
* Thu Dec 14 2017 stefan.bruens@rwth-aachen.de
- Fix dependencies and build options for non-x86 architectures. At
least FW updates for USB are arch independent, and EFI FW updates
can also be applied on Aarch64.
* Fri Oct 27 2017 dimstar@opensuse.org
- Update to version 1.0.0:
* Add the plugin documentation to the main gtk-doc
* Add a waiting-for-auth daemon state
* Add fwupd_remote_get_checksum() to use in client programs
* Generate the LD script from the GObject Introspection data
* Prevent fwupd from mounting filesystems
* uefi: Do not use system-specific infomation for PCI devices
* uefi: Support uploading the firmware splash image
* dell: only set coldplug delay when we know we need it
* dell: only run SMI to toggle host MST GPIO on systems with host MST
* dell: add functionality to blacklist HW with problems
* dell: only run on intended chassis
* thunderbolt-power: always run after thunderbolt plugin
* Allow plugins to depend on each other
* Add support for SMBIOSv3
* dell: prefer to use hwids to get DMI keys and DE table
* debian: remove /etc/fwupd.conf on upgrade
* unifying: Use fu_plugin_check_supported()
* Add fu_plugin_check_supported()
* unifying: Use a device whitelist to avoid breaking devices
* Fix various printing issues with the progressbar
* dell: Fix a trivial whitespace issue
* Do not fail to load the daemon if cached metadata is invalid
* Do not store the newest release as part of the FuDevice object
* Add a method to return a list of upgrades for a specific device
* Move the downgrade calculation to the daemon
* Make FuDevice derive from FwupdDevice rather than FwupdResult
* Add a command 'clear-offline' to fwupdmgr
* Merge releases where multiple remotes provide the same firmware
* Remove the UniqueID property
* uefi: Do not set the release version
* udev: Do not match USB devices, even with a GUID set
* Use the intel-wmi-thunderbolt kernel module to force power
* dell: drop thunderbolt force power code
* unifying: Add hardcoded summaries for peripheral kinds
* Create CODE_OF_CONDUCT.md
* Ensure more devices set the device summary
* Add an 'Summary' property to each device
* Add a human-readable title for each remote
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Move deprecated symbols to a new header
* Introduce an s390x cross compile target to CI
* Add ModifyRemote as an easy way to enable and disable remotes like the LVFS
* Do not auto-open all USB devices at startup
* dfu: Use FuDeviceLocker
* unifying: Use FuDeviceLocker
* colorhug: Use FuDeviceLocker
* ebitdo: Use FuDeviceLocker
* altos: Use FuDeviceLocker
* steelseries: Use FuDeviceLocker
* usb: Use FuDeviceLocker
* Add FuDeviceLocker to simplify device open/close lifecycles
* dfu: Remove DEVO support
* dfu: Remove the now-unused symtab support
* Remove the ELF support from libdfu and move the code to the altos plugin
* Use -Werror when building in Travis CI
* Do not install the libdfu helper library
* Parse the SMBIOS DMI table directly
* usb: Disable the fallback USB plugin
* Test for missing language translations at build time
* Fix the libdfu self test failure on s390 and ppc64
* Fri Oct 27 2017 dimstar@opensuse.org
- Update to version 0.9.8:
* Add a command 'clear-offline' to fwupdmgr
* Do not fail to load the daemon if cached metadata is invalid
* Fix a crash when using fu_plugin_device_add_delay()
* Fix the libdfu self test failure on s390 and ppc64
* Format the BCD USB revision numbers correctly
* Never fallback to an offline update from client code
* Prevent fwupd from mounting filesystems
* dfu: Allow flashing when the target does not specify an
alt-name
* dfu: Do not try to verify the element write if upload is
unsupported
* dfu: Fix uploading large firmware files
* dfu: Include the reset timeout as wValue to fix some hardware
* dfu: Set the vendor ID to the runtime USB VID
* dfu: Use 0x0101 as an alias for 0x0110
* thunderbolt: move test for mock environment
(gh#hughsie/fwupd#280)
* udev: Do not match USB devices, even with a GUID set
* uefi: Do not set the release version
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Tue Sep 19 2017 dimstar@opensuse.org
- Update to version 0.9.7:
+ 10 months worth of bugfixing, integrating more vendor specific
Firmware update paths.
* Thu Mar 02 2017 dimstar@opensuse.org
- Update to version 0.8.1:
+ Delete duplicate translations (gh#hughsie/fwupd#89).
+ Do not hardcode docbook2man path.
+ Fix fwupdmgr timeout with missing pending database.
+ Fix compiler warnings.
+ Fix a crash when enumerating devices on a Dell WLD15.
+ dell: don't initialize libsmbios on unsupported systems.
+ Do not fail to start on Dell hardware.
+ Adjust systemd confinement restrictions.
+ Do not dlclose modules when running under valgrind.
+ Really remove the NoNewPrivileges systemd confinement.
+ Release fwupd 0.8.1.
* Mon Feb 27 2017 mpluskal@suse.com
- Update to version 0.8.0:
+ Show a different error when checking for updates while on
+ battery power (gh#hughsie/fwupd#68).
+ Clarify the test in --help and man page related to offline
+ (gh#hughsie/fwupd#69).
+ libdfu: Use a heuristic for the start address if the firmware
+ has no DfuSe footer.
+ dell: Don't return the address of a stack variable.
+ dell: Fix a possibly-impossible-to-hit buffer overrun.
+ close USB devices before error returns (gh#hughsie/fwupd#73).
+ Make libelf support optional.
+ Always make sure we're getting a C99 compiler.
+ Fix redeclaration of polkit autocleanup functions.
+ Uncomment SystemdService parameter in the dbus service file
+ (gh#hughsie/fwupd#74).
+ Make all providers and plugins share a GUsbContext.
+ Unexport libebitdo.
+ Move the plugins into plugin-specific directories.
+ Convert the providers to plugins to simplify code and for
+ future features.
+ Add support for Logitech Unifying devices.
+ Add a set of vfuncs that are run before and after a device
+ update.
+ Return the pending UEFI update when not on AC power.
+ Move the UPower functionality to a plugin.
+ Fix udev plugin loading.
+ fix dfu plugin loading.
+ Disable PrivateNetwork on systemd service.
+ Use more restrictive settings when running under systemd.
+ dell: add a new method for forcing a controller to flash mode.
+ Add VerifyUpdate to update the device checksums server-side.
+ Move the Option ROM parsing to the Udev plugin.
+ Move the device add delay to shared code.
+ Add initial skeleton for Intel Thunderbolt support.
+ unifying: Use the actual bootloader VID/PIDs when in firmware
+ mode.
+ Allow the metadata to match a version of fwupd and the existing
+ fw version.
+ Add fwupd_result_get_device_version_bootloader().
+ Fix the appstream-glib version guards.
+ dell: Add coldplug methods to let other plugins turn on
+ TBT/GPIO.
+ libdfu: Don't read data from some DfuSe targets.
+ Add the ability to run a prepare->exec->cleanup on coldplug.
+ Allow plugins to request that all plugins re-coldplug.
+ thunderbolt: Detecting new devices and add an actual device to
+ the daemon.
+ Add support for flashing the ChaosKey.
+ thunderbolt: add some guards around empty arrays.
+ dell: Adjust the coldplug preparation and cleanup sequence.
+ dell: Fix possible linker problem.
+ Revert "thunderbolt: add some guards around empty arrays".
+ Add fu_plugin_set_coldplug_delay() to allow hardware to
+ initialize if required.
+ altos: Add error checking when using termios.
+ ebitdo: Subclass FuDevice like the altos plugin.
+ altos: Set the flags in the init_real so they work for the
+ cmdline tool.
+ unifying: Subclass FuDevice like the altos plugin.
+ Include all debug messages when run with --verbose.
+ dell: introduce a standalone (noinst) tool to force mode
+ flashes.
+ Introduce plugin for Synaptics MST hubs.
+ synapticsmst: Add cascade support.
+ Only register the D-Bus service when all devices have been
+ added.
+ synapticsmst: Refactor away the global state.
+ synapticsmst: fix cascade support in the plugin.
+ Updates for thunderbolt plugin.
+ thunderbolt: Add special handling for safe mode on Dell systems
+ (gh#hughsie/fwupd#84).
+ synapticsmst: Iterate all nodes rather than hardcoding to 3.
+ synapticsmst: build GUID using dock type.
+ Add a new function fu_dell_supported to fu-dell-common.
+ synapticsmst: add a test suite.
+ synapticsmst: Fix up some trivial whitespace issues.
+ Fix a refcounting issue in the udev plugin.
- Add rpmlintrc untill security review is resolved
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.5:
+ Clean up PO files
+ Verify devices support updating in mode they are called.
+ Fix an assert when unlocking the dummy ESRT device
+ Don't create the UEFI dummy device if the unlock will happen on
+ next boot
+ dell: Match on TB16 as well
+ Fix a -fstack-protector-strong crash when uploading firmware
+ Enable the stack protection in local builds
+ dell: If running in test suite, don't try to get product ID
+ from sysfs
+ libfdfu: Show a warning when getting the alt-name failed
+ dfu: Fix listing devices using the ST reference bootloader
+ Show the nicely formatted target name for DfuSe devices
+ libdfu: Fix two possible critical warnings for corrupt USB
+ descriptors
+ libdfu: Correctly offset addresses when one zone has multiple
+ sectors
+ libdfu: Do not do GetStatus on dfuse upload
+ libdfu: Fix uploading from DfuSe devices
+ libdfu: Use the device offset when writing DfuSe firmware
+ libdfu: Add DfuAction enumerated value to represent a device
+ action
+ libdfu: Use an animated progress bar when performing DFU
+ operations
+ libdfu: Do not do a zero-byte download when in DfuSe mode
+ libdfu: Fix verification of written DfuSe firmware
+ libdfu: Ensure the device is open before claiming the interface
+ libdfu: Ensure the mode is set correctly when faking a runtime
+ libdfu: Re-get the quirks when the DfuDevice gets a new
+ GUsbDevice
+ libdfu: Add quirks for HydraBus as it does not have a DFU
+ runtime
+ libdfu: Match the device booloader or runtime VID and PID when
+ checking firmware
+ Add a 'replace-data' command to dfu-tool
+ string
+ libdfu: Add dfu_sector_get_zone() to get the continuous memory
+ zone number
+ libdfu: Wait for DNBUSY to be cleared when checking the DfuSe
+ status
+ libdfu: Correctly erase DfuSe devices
+ Enable hardening flags on more binaries
+ libdfu: Correctly set the element address when uploading from
+ DfuSe devices
- Add pkgconfig(gmodule-2.0) BuildRequires: Align with what
+ configure checks for.
- Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios.
+ Unfortunatly, until we have fwup packaged and enabled, this will
+ not work.
- Add disabled pkgconfig(libtbtfwu): For future thunderbolt
+ support.
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.4:
+ Add a fallback for older appstream-glib releases
+ Write the ELF files with the correct section type
+ Fix libfwupd self tests when a host-provided fwupd is not
+ available
+ Add dfu_firmware_add_symbol()
+ Add the Altos symbol table to the DfuFirmware
+ Use the symtab to set the VID/PID from Altos IHEX firmware
+ images
+ Show the human-readable version in the 'dfu-tool dump' output
+ Allow specifying the argument to 'dfu-tool set-release' in
+ major.minor format.
+ sections
+ Support writing the IHEX symbol table
+ call
+ Load the symbol table from ELF firmware
+ Load the Altos USB descriptor from ELF files
+ Add DFU_CIPHER_KIND_RSA
+ Fix a possible crash when uploading firmware files using libdfu
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.3:
+ build: Fix gtk-doc build when srcdir != builddir
+ In get-details output, display the blob filename
+ Ensure the update ID is set when getting local firmware details
+ Use a private gnupg key store
+ Add support for installing against multiple devices from a CAB
+ file
+ Use the correct firmware blob when installing a composite
+ device update
+ in get-details output, display update_name rather than Unknown
+ Device
+ statements
+ Don't make failures critical while checking versions or locked
+ state
+ Show a more detailed error when installing firmware on the
+ wildcard
+ Add Dell TPM and TB15/WD15 support via new Dell provider.
+ file
+ Allow blacklisting devices by their GUID
+ header file
+ Add XPS 9250 to Dell TPM modeswitch blacklist
+ Only display flashes left in results output when it gets low.
+ Add a small library for talking with 0bitdo hardware
+ Add another compile warning and fix up any build failures
+ Embed fwupd version in generated libfwupd and libdfu
+ documentation
+ Update fwupdmgr manpage for new commands and arguments
+ build: Fix gtk-doc build when srcdir != builddir
+ online not offline
+ Get the firmware version correctly from 0Bitdo gamepads
+ Switch to the Amazon S3 CDN for firmware metadata
+ Fix writing 8Bitdo device firmware
+ be updated
+ Show the vendor flashing instructions when installing
+ Split out the DFU file formats to separate files
+ Add fwupd_result_remove_device_flag()
+ Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER
+ get-updates output
+ Allow providers to export percentage completion
+ Add fwupd_client_get_status()
+ Handle the 8Bitdo bootloader in a better way
+ Show a progress notification when installing firmware
+ Add fwupd_result_get_unique_id()
+ Use the SHA1 hash of the local file data as the component
+ origin
+ Use the correct define prefix for FwupdDeviceFlags
+ libdfu: Fix hang when parsing corrupt IHEX files
+ Add a set-target-size command to dfu-tool
+ Support the 'DEVO' cipher kind in libdfu
+ Add a set-address command to dfu-util
+ Disable the Dell specific code by default
+ Conditionally enable all providers based upon what's installed
+ Add a summary of providers that are enabled from configure
+ Do not use the deprecated GNOME_COMPILE_WARNINGS
+ Ignore devices that do not add at least one GUID
+ Do not attempt to add DFU devices not in runtime mode
+ Save the unique ID in the pending database
+ libdfu: Add initial ELF reading and writing support
+ Add dfu_firmware_format_from_string()
+ Normalize the DfuFirmwareFormat enums
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.2:
+ Allow devices to have multiple assigned GUIDs
+ Only return updatable devices from GetDevices()
+ Add fu_device_get_alternate()
+ Allow metainfo files to match only specific revisions of
+ devices
+ Re-read flags for a device after a provider's unlock routine is
+ done
+ Test for a locked device when trying to install firmware update
+ Enforce allowing providers to take away flash abilities
+ Support returning multiple GUIDs from GetDetails
+ Add a GetDetailsLocal() method to eventually replace
+ GetDetails()
+ break
+ libdfu: Add DfuVersion enumerated values
+ libdfu: Show the DFU protocol version in 'dfu-tool list'
+ Only claim the DFU interface when required
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.1:
+ Fix libdfu CRC check for big endian architectures
+ Add dfu_image_get_element_default()
+ Fix libdfu CRC check for big endian architectures
+ Fix big endian issues when reading and writing DFU and DfuSe
+ files
+ Remove non-interactive pinentry setting from fu-keyring
+ Set the system's DMI product name as the DisplayName for UEFI
+ Re-order output of get-devices to be easier to read
+ Make the device display name nicer
+ update version
+ Return all update descriptions newer than the installed version
+ Add summary and name field for Rival SteelSeries
+ Fix a critical warning when restarting the daemon
+ Add a 'supported' flag to the FuDevice
+ Add fwupd_client_connect()
+ Add a 'monitor' debugging command for fwupdmgr
+ Add device-added, device-removed and device-changed signals
+ Match the AppStream metadata after a device has been adedd
+ Re-match devices when the AppStream metadata is updated
+ Show 'Unknow Device' in fwupdmgr when a device name is not set
+ Set the device description when parsing local firmware files
+ Add support for a new device field "Flashes Left".
+ src/Makefile.am: reshuffle so enableable bits are only
+ referenced when on
+ Add support for a --force flag to override provider warnings
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.7.0:
+ Use g_usb_context_wait_for_replug()
+ Run vendor plugins as required
+ Add a plugin for SteelSeries hardware
+ Add fwupd_device_flag_to_string()
+ Return the device flags when getting firmware details
+ Show device flags in 'fwupdmgr get-devices'
+ Add fwupd_trust_flag_to_string()
+ Export FwupdUpdateState in libfwupd
+ Export FwupdUpdateFlags in libfwupd
+ Add FwupdResult to libfwupd
+ Add a self test framework for libfwupd
+ Add FwupdClient to libfwupd
+ Use FwupdClient from libfwupd in fwupdmgr
+ Use libfwupd inside the daemon
+ Emit a FwupdClient::changed when the daemon emits this signal
+ Rename some of the new libfwupd API to align with the D-Bus
+ names
+ libdfu: Fix up some NULL/FALSE confusion
+ libfwup: Fix up some NULL/FALSE confusion
+ FwupdClient
+ Allow other checksum kinds in FwupdResult
+ Allow SHA-256 hashes when verifying
+ Show the checksum kind in the fwupdmgr output
+ Add Alienware to the version quirk table
+ Do not use /tmp for downloaded files
+ Add fwupd_result_has_device_flag()
+ Do not return updates that require AC when on battery
+ Connect to UPower at startup
+ Test that GPG key import actually was successful (or didn't
+ change a key already in the keyring)
+ Use g_auto() in FuKeyring
+ Return errors of the correct type when using libfwupd
+ Allow overridding the location of the pending database for
+ test suite
+ Allow overriding the location of the provider offline files for
+ test suite
+ Validate that the dbus system bus is available before running
+ libfwupd tests
+ Update README.md for changes that have happened in the project
+ Add some basic explanation of how to use fwupd with various
+ frontends
+ Split out the libdfu-devel package
+ Revert "Allow overridding the location of the pending database
+ for test suite"
+ Revert "Allow overriding the location of the provider offline
+ files for test suite"
+ Allow the test suite to run in %check
+ Generate gtk-doc documentation for libfwupd
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.3:
+ Require AC power before scheduling some types of firmware
+ update
+ Install the hardcoded firmware AppStream file
+ Correct the BCD version number for DFU 1.1
+ Add an unlock method for devices
+ Add ESRT enable method into UEFI provider.
+ Only read PCI OptionROM firmware when devices are manually
+ unlocked
+ Do not use deprecated API from libappstream-glib
+ Ignore the DFU runtime on the DW1820A
+ Export the attribute and quirk values in libdfu
+ Show ignored DFU devices in dfu-util, but not in fwupd
+ Allow defining update vfuncs with no runtime support
+ Revert "Allow defining update vfuncs with no runtime support"
+ Add a simple plugin infrastructure
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.2:
+ Add 'Created' and 'Modified' properties on managed devices
+ Fix get-results for UEFI provider.
+ Support vendor-specific UEFI version encodings
+ Move quirks directly into a single table and file.
* Mon Jan 30 2017 zaitor@opensuse.org
- Update to version 0.6.1:
+ Only dump the profiling data when run with --verbose
+ Always persist ColorHug devices after replug
+ Do not misdetect different ColorHug devices
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.6.0:
+ Add support for updating USB devices with DFU
+ libdfu: Add support for DfuSe firmware
+ libdfu: Generate gtk-doc documentation
+ libdfu: Don't rely on specific hardware to be present
+ libdfu: Move the VID:PID checks from the tool to DfuDevice
+ libdfu: Use a custom error domain
+ Use the same device identification string format as Microsoft
+ libdfu: Fix crash when setting a target size
+ libdfu: Allow setting the alternate settings in DfuSe firmware
+ libdfu: Add a merge command to dfu-tool
+ libdfu: Allow choosing a different alt-setting when downloading
+ libdfu: Fix a crash when setting a NULL image name
+ libdfu: Correctly implement auto-boot in dfu_device_download()
+ libdfu: Check for extra args to dfu-tool convert
+ libdfu: Call the progress callback when doing detach
+ Ignore the DFU device detach:attach when verifying
+ libdfu: Require a --force flag to flash wildcard firmware
+ Use new API available in fwup 0.5
+ libdfu: Make the element address 32 bits in size
+ libdfu: Support the ST-specific bitCanAccelerate
+ libdfu: Only do a Detach notification if we're actually doing
to do it
+ libdfu: Use the progress bar for all uploads and downloads
+ libdfu: Improve the output of 'dfu-util list'
+ libdfu: Support download and upload to ST DfuSe devices
+ libdfu: Fix multi-interface devices like the Neo Freerunner
+ libdfu: Add a pkgconfig file
+ libdfu: Use signals to propagate device state
+ libdfu: Add a context object to handle device hotplug
+ libdfu: Add an example showing GObject Introspection
+ libdfu: Do not ref DfuDevice in DfuTarget so the auto-close
+ logic works
+ Close DFU devices as soon as possible after the transfer has
completed
+ Emit the changed signal after doing an update
+ Rescan the DFU device after replug to get the new version
+ libdfu: Add dfu_context_get_device_by_platform_id()
+ libdfu: Add dfu_device_get_runtime_release()
+ libdfu: Add dfu_device_get_display_name()
+ libdfu: Fix self tests after recent API change
+ Split out the DFU provider as a new file
+ libdfu: Copy the platform ID and invalidate the GUsbDevice when
removed
+ libdfu: Accept multiple spaces after the DfuSe sector name
+ libdfu: Verify the GUsbDevice is set before using it
+ libdfu: Remove the weak pointer when destroying the DfuTarget
+ libdfu: Fix dfu_device_wait_for_replug() so it can work with a
DfuContext
+ Export the AppStream ID when returning device results
+ Rescan the DFU device after firmware has been updated
+ libdfu: Handle cancellation with ctrl+c in dfu-tool
+ libdfu: Add a quirk to support DFU runtime-less devices
+ libdfu: Add an explicit 'attach' method
+ libdfu: Add dfu_firmware_get_image_by_name()
+ libdfu: Make reading and writing to targets easier to
+ understand
+ Fix compile with --disable-shared
+ libdfu: Display all the files shown with 'dfu-tool dump'
+ libdfu: Fix a few crashers found using afl
+ libdfu: Fix another bug discovered by the fuzzer
+ libdfu: Add commands to encrypt and decrypt firmware images
+ libdfu: Show better device errors
+ libdfu: Add DfuCipher which is a property on a target and a
+ firmware file
+ libdfu: Add support for the draft 'DFU Metadata Table
+ Specification'
+ libdfu: Only enumerate the DfuContext when required
+ libdfu: Fix several reported crashes in the inhex32 import code
+ Release fwupd 0.6.0
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.4:
+ Fix compile error against fwupdate git due to dropped
+ functions.
+ Use strerror() when printing errors from libfwupdate
+ Use new API available in fwup 0.5
+ Release fwupd 0.5.4
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.3:
+ Avoid seeking when reading the file magic during refresh
+ Do not assume that the compressed XML data will be NUL
+ terminated
+ debugging
+ Use the correct user agent string for fwupdmgr
+ Release fwupd 0.5.3
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.2:
+ Ensure D-Bus remote errors are registered at fwupdmgr startup
+ Show the dotted-decimal representation of the UEFI version
+ number
+ require appstream-glib 0.5.1
+ not found
+ When the version is from the 'FW' extension do not cache the
+ device
+ Support cabinet archives files with more than one firmware
+ Add the update description to the GetDetails results
+ Add profiling data to debug slow startup times
+ Fix verify-update to produce components with the correct
+ provide values
+ Clear the in-memory firmware store only after parsing a valid
+ XML file
+ Release fwupd 0.5.2
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.1:
+ Fix the error message when no devices can be updated
+ offline update: Use glib api for for reading symlinks
+ Release fwupd 0.5.1
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.5.0:
+ Do not merge the existing firmware metadata with the submitted
+ files
+ Raise the dep on GLib to support and use g_autoptr()
+ Do not reboot if racing with the PackageKit offline update
+ mechanism
+ Release fwupd 0.5.0
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.6:
+ Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd
+ instead.
+ Use the new secure metadata URI
+ Update the offline update service to invoke right command
+ Don't apply firmware if something else is processing the
+ offline update
+ Remove fwsignd, we have the LVFS now
+ Depend on appstream-glib >= 0.5.0
+ Add application metadata when getting the updates list
+ Simplify the version properties on devices to avoid complexity
+ and bugs
+ Release fwupd 0.1.6
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.5:
+ Allow fwupd to be autostarted by systemd
+ Sign the test binary with the correct key
+ Do not pre-convert the update description from AppStream XML
+ Devices with option ROM are always internal
+ Prefer the GUID from the firmware than the device
+ Allow no arguments to 'fwupdmgr verify-update' and use sane
+ defaults
+ Add the ability to remove a vendor on the LVFS site
+ Fix validation of written firmware
+ Move the verification and metadata matching phase to the daemon
+ Add a simple config file to store the correct LVFS download URI
+ Make parsing the option ROM runtime optional
+ Add a Raspberry Pi firmware provider
+ Use the AppStream 0.9 firmware specification by default
+ Generate the ColorHug test files at runtime
+ Release fwupd 0.1.5
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.4:
+ man/Makefile.am: Add --sgml to docbook2man invocation
+ Make statements about storing private keys stronger.
+ Provide a way for clients to add new firmware metadata to the
+ system cache
+ Fix fwupd-offline-update.service
+ Revert "man/Makefile.am: Add --sgml to docbook2man invocation"
+ Add a Udev firmware provider
+ Extract the version string from the ROM in PCI devices
+ Add a 'verify' command that verifies the cryptographic hash of
+ device firmware
+ Make the ROM parsing more robust and add self tests
+ Get the version number out from Intel VBIOS too
+ Provide a way to dump the option ROM using the command line
+ build: gusb is required even without colorhug
+ remove unused variables
+ Do not return NULL as a gboolean
+ Fix Intel VBIOS detection on Dell hardware
+ Do not use the subsystem information when constructing the fake
+ GUID
+ Actually parse the PCI option ROM
+ Accept multiple files at one time when using fwupdmgr dump-rom
+ verify run
+ Add a 'verify-update' command to fwupdmgr
+ Fix trivial bug when parsing firmware versions
+ Keep hitting the hardware until it gives us enough ROM
+ Make the version parsing more resilient to corrupt firmware
+ Fix the example .inf file to reflect reality
+ Fix ROM PPID searching to work for all ROMs
+ Move the LVFS website to the fwupd project
+ Add the ability to create detached signatures
+ Allow cab files to be saved
+ Add a simple signing server that operates on .cab files
+ Automatically download metadata using fwupdmgr if required
+ Don't call efibootmgr after fwupdate.
+ Associate the contact email address directly with the vendor
+ key
+ Use the actual LVFS GPG key
+ Allow running fwsignd as the non-root user
+ metadata
+ Do not merge existing LVFS metadata
+ Do not use the file hash when storing the LVFS submitted
+ firmwares
+ Move GetUpdates to the daemon
+ Change the DBus method for installing firmware to 'Install'
+ Allow installing an offline UEFI update without --offline
+ Add a 'fwupdmgr update' command to update all devices to latest
+ versions
+ 'update' command
+ Increase the size limit of firmware to 50Mb
+ Only sign files when the entire file has been copied
+ Fallback to offline install when calling the update argument.
+ Reload appstream data after refreshing.
+ Release fwupd 0.1.4
* Thu Dec 10 2015 dimstar@opensuse.org
- Update to version 0.1.3:
+ Coldplug the devices before acquiring the well known name
+ Add an UNKNOWN status so we can return meaningful enum values
+ Run the offline actions using systemd when required
+ Get the firmware version from the device descriptors
+ Added syntax highlighting
+ More markup
+ Support OpenHardware devices using the fwupd vendor extensions
+ Move boolean properties on the device to a set of flags
+ Release fwupd 0.1.3
* Wed May 27 2015 dimstar@opensuse.org
- Update to version 0.1.2:
+ More markup
+ Fixed typos and markup for executable
+ Add slovak translation
+ Add helper code to validate public key signatures
+ Decompress any firmware signatures in the .cab file
+ Verify firmware if a detached signature is present
+ Show the firmware trust status when doing GetDetails()
+ Only allow signed firmware to be upgraded without a password
+ Add some guidelines for vendors to README
+ Small grammar fix
+ Extract the .cat file alongside the firmware
+ Release fwupd 0.1.2
* Mon Apr 13 2015 dimstar@opensuse.org
- Update to version fwupd_0_1_1:
+ Do not crash when there are no devices to return
+ Add a 'get-updates' command to fwupdmgr
+ Add and document the offline-update lifecycle
+ Create runtime directories if they do not exist
+ Create a libfwupd shared library
+ Export the status as an enumerated value rather than a string
+ Release fwupd 0.1.1
* Mon Apr 13 2015 dimstar@opensuse.org
- Initial package.
/usr/include/fwupd-1 /usr/include/fwupd-1/fwupd.h /usr/include/fwupd-1/libfwupd /usr/include/fwupd-1/libfwupd/fwupd-client.h /usr/include/fwupd-1/libfwupd/fwupd-common.h /usr/include/fwupd-1/libfwupd/fwupd-deprecated.h /usr/include/fwupd-1/libfwupd/fwupd-device.h /usr/include/fwupd-1/libfwupd/fwupd-enums.h /usr/include/fwupd-1/libfwupd/fwupd-error.h /usr/include/fwupd-1/libfwupd/fwupd-release.h /usr/include/fwupd-1/libfwupd/fwupd-remote.h /usr/include/fwupd-1/libfwupd/fwupd-version.h /usr/lib64/libfwupd.so /usr/lib64/pkgconfig/fwupd.pc /usr/share/gir-1.0/Fwupd-2.0.gir /usr/share/gtk-doc/html/libfwupd /usr/share/gtk-doc/html/libfwupd/annotation-glossary.html /usr/share/gtk-doc/html/libfwupd/api-index-full.html /usr/share/gtk-doc/html/libfwupd/home.png /usr/share/gtk-doc/html/libfwupd/index.html /usr/share/gtk-doc/html/libfwupd/intro.html /usr/share/gtk-doc/html/libfwupd/left-insensitive.png /usr/share/gtk-doc/html/libfwupd/left.png /usr/share/gtk-doc/html/libfwupd/libfwupd-FuDevice.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FuDeviceLocker.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FuPlugin.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FuUdevDevice.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FuUsbDevice.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FwupdClient.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FwupdDevice.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FwupdRelease.html /usr/share/gtk-doc/html/libfwupd/libfwupd-FwupdRemote.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fu-chunk.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fu-common.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fu-device-metadata.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fu-quirks.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fwupd-enums.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fwupd-error.html /usr/share/gtk-doc/html/libfwupd/libfwupd-fwupd-version.html /usr/share/gtk-doc/html/libfwupd/libfwupd.devhelp2 /usr/share/gtk-doc/html/libfwupd/libfwupd.html /usr/share/gtk-doc/html/libfwupd/plugin-reference.html /usr/share/gtk-doc/html/libfwupd/right-insensitive.png /usr/share/gtk-doc/html/libfwupd/right.png /usr/share/gtk-doc/html/libfwupd/style.css /usr/share/gtk-doc/html/libfwupd/tutorial.html /usr/share/gtk-doc/html/libfwupd/up-insensitive.png /usr/share/gtk-doc/html/libfwupd/up.png /usr/share/vala/vapi/fwupd.deps /usr/share/vala/vapi/fwupd.vapi
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 12:50:41 2024