libindiclient2-2.1.1-1.2 RPM for x86_64

From OpenSuSE Tumbleweed for x86_64

INDI is an Instrument Neutral Distributed Interface control protocol
for astronomical devices, which provides a framework that decouples low
level hardware drivers from high level front end clients. Clients that
use the device drivers are completely unaware of the device
capabilities and communicate with the device drivers and build a
completely dynamic GUI based on the services provided by the device.

Provides

• libindiclient2
• libindiclient.so.2()(64bit)
• libindiclient2(x86-64)

Requires

• /sbin/ldconfig
• /sbin/ldconfig
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.14)(64bit)
• libc.so.6(GLIBC_2.15)(64bit)
• libc.so.6(GLIBC_2.16)(64bit)
• libc.so.6(GLIBC_2.2.5)(64bit)
• libc.so.6(GLIBC_2.3)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.32)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libc.so.6(GLIBC_2.7)(64bit)
• libgcc_s.so.1()(64bit)
• libgcc_s.so.1(GCC_3.0)(64bit)
• libgcc_s.so.1(GCC_3.3.1)(64bit)
• libm.so.6()(64bit)
• libm.so.6(GLIBC_2.2.5)(64bit)
• libm.so.6(GLIBC_2.29)(64bit)
• libnova-0.15.so.0()(64bit)
• libstdc++.so.6()(64bit)
• libstdc++.so.6(CXXABI_1.3)(64bit)
• libstdc++.so.6(CXXABI_1.3.9)(64bit)
• libstdc++.so.6(GLIBCXX_3.4)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.11)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.14)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.15)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.19)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.20)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.21)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.22)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.29)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.9)(64bit)
• libz.so.1()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-or-later AND LGPL-2.1-or-later AND GPL-3.0-or-later

Changelog

* Mon Dec 09 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.1.1:
    * Fixed missing apply() on TrackStateSP property by @atoy40 in #2130
    * Update SnapCap driver to use common abort capability from DustCapInterface instead of doing it manually. by @jpaana in #2136
    * Miscellaneous ScopeDome driver updates. by @jpaana in #2137
    * FP2 motor status by @DeepSkyDad in #2139
    * Migrate INDI Astrolink4 by @naheedsa in #2133
    * Migrate Astromech focuser by @naheedsa in #2134
    * Update ieaffocus.cpp by @joe13905179063 in #2141
    * Fixed crash due not checking boundary values of the axis in telescope_simulator by @artyom-beilis in #2144
    * Upgrade CheapoDC driver for new device firmware features by @hcomet in #2142
    * Sim crash fix - looks like found root cause by @artyom-beilis in #2147
* Tue Oct 01 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.1.0:
    * Initial work for guider and focuser interface refactor
    * Fixed myFocuserPro2 Autofocus Issues in Ekos
    * Update Tracking code
    * Add workaround for OnStepX failing connection
    * Migrate telescope properties
    * Migrate Temperature Property
    * Update light box and dust cap interfaces to new style
    * drivers/dome: rigel_dome shutter parking
    * Joining FP1 and FP2 into single FP driver
    * lx200zeq driver had incorrect pulse commands
    * Fix Motion Control Mode
    * use MOTION_CONTROL_MODE _FOO enums
    * enable more Meade commands
* Fri Aug 30 2024 Max Lin <mlin@suse.com>
  - To use cfitsio-devel on 16.0 as well not just greater than 16.0
* Fri Aug 02 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.9:
    * Minor buffer boundary fixes
    * Weather watcher dynamic labels
    * PegasusAstro FalconV2 Driver
    * Add Terrans PowerBoxPro V2 Driver
    * Waveshare Modbus Relay Drive
    * Universal Roll off roof driver
    * ZWO AM5 Save home position in the mount
* Mon Jun 10 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.8:
    * Avoid using .getName() for new INDI properties
    * Migrate drivers to new properties
    * Various fixes
* Wed May 29 2024 Paolo Stivanin <info@paolostivanin.com>
  - Use ldconfig_scriptlets macro
* Tue Apr 02 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.7:
    * Update Pegasus Focuscube
    * New driver for DIY dew controllaer cheapodc
    * Weather interface refactor
    * Driver for Wnaderer Box and Cover products
    * Initial release of Alluno TCS2 driver
* Thu Feb 01 2024 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.6:
    * Link against httplib if using system libraries
    * fix(actions): upgrade actions versions
    * Fix various typos throughout the codebase
    * Remove obsolete Avalon Legacy driver
    * TeenAstro pulse behaviour #1977
    * iOptron iEAF indi driver
    * Allow using system provided json library
    * Flip-flat: Allow handshake without ioctl on virtual serial connection
    * Fix version reporting on older Celestron NexStar mounts
    * PegasusAstro SaddlePowerBox
* Tue Dec 05 2023 Paolo Stivanin <info@paolostivanin.com>
  - Rename libindi to indi.
* Mon Dec 04 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.5:
    * Fix issue 1938
    * Add one more check to ensure minimum count is met
    * Update ioptronv3driver.cpp
    * Handling tracking mode in the pegasus driver, and enable King mode
    * Fixed 9 Stars Align
    * On step work
    * Added several missing commands
    * Snapcap driver with network connections
* Wed Oct 04 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.4:
    * Fix bug in relative positioning of Lacerta MFOC
    * Fix setFormat typos, add isEmpty method
    * Use ZSTD compression for XISF images when available
    * Preliminary support for Planewave
    * Bug fix making both focusers visible
    * focuser crash fixed+some properties added
    * OnStep work
    * Openastrotech work
* Fri Sep 29 2023 Paolo Stivanin <info@paolostivanin.com>
  - Force usage of GCC>=12 on Leap.
* Tue Aug 01 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.3:
    * Simplify RTL-SDR driver for bug #558
    * Update ioptronv3.cpp
    * Fix leaks last blob on driver restart
* Fri Jun 02 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.2:
    * Minor Fixes discrepancies Indi / SmartwebServer
    * Add Flip functionality
    * Pegasus NYX-101
    * Bugfix/mfoc rel movement error
    * Fix AutoPA lx200 OpenAstroTech
    * Esatto: Port state tracking from EsattoArco
    * PLL: Treat ERR messages as out-of-bound warnings
* Tue Apr 04 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.1:
    * Resolve timestamp name conflict.
    * Fix PMC8 tracking rate.
    * Support for XISF files.
    * Update DDW dome driver for new property functions.
    * Added Safety and Goto Limits.
    * Feature/qhy gps timestamp.
    * Addition of myDewControllerPro driver.
    * Southern Hemisphere Support for PMC8.
    * Fixed regression with Servo Precision logic setting.
    * [WandererCover] Adding support for newer firmware (20221008).
    * Add driver for myDCP4ESP32 Dew Contoller.
    * Focuser Temperature Compensation minor fixes.
    * Fixing Openastrotech AutoPA.
    * Fixed SestoSenso2 calibration.
    * Force enable tracking after slew and unpark.
  - Remove fix-operator.patch
  - Remove fix-timestamp.patch
* Thu Mar 23 2023 Martin Liška <mliska@suse.cz>
  - Enable LTO as it builds fine.
* Fri Mar 10 2023 Paolo Stivanin <info@paolostivanin.com>
  - Revert hwcaps.
* Wed Mar 08 2023 Paolo Stivanin <info@paolostivanin.com>
  - Build AVX2 enabled hwcaps library for x86_64-v3
* Wed Feb 08 2023 Paolo Stivanin <info@paolostivanin.com>
  - Add fix-operator.patch (#1843)
  - Add fix-timestamp.patch (#1837)
* Tue Jan 31 2023 Paolo Stivanin <info@paolostivanin.com>
  - Update to 2.0.0:
    * Esatto & SestoSenso2 update
    * Fix for issue1582 park status notifications and extra debugging for command errors
    * Add delay possibility for lx200 driver pulse command
    * Refactor - use PropertyView/WidgetView
    * Fix BaseClient::serverDisconnected behavior
    * Deprecated use of Property/BaseDevice as pointer
    * Don't modify usbfs_memory_mb if already set to unlimited
    * Switch Flip Points to use sexagesimal numbers
    * Refactor INDI::GPS to be inline with INDI 2.0.0
    * General cleanup
    * Don't call serverDisconnected if the client is not connected
    * Add refraction, and turn off J2000 for Gemini
    * Feature/new firmware fmc mfoc (Lacerta)
    * Downgrade to base64 for snooped blobs
* Sun Dec 18 2022 Paolo Stivanin <info@paolostivanin.com>
  - Fix cfitsio dep on TW
* Wed Nov 30 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.9:
    * Driver for OpenAstroTech mounts
    * DRIVER_INFO also present for F2 focuser so that the device is detected
    * DeepSkyDad AF3: Mark as OK after backlash compensation
    * Add Excalibur Driver
    * Improved star brightness handling for higher gain
    * Add Gemini L6 Flip Point
    * lx200_OnStep minor fix
    * Add missing rule for switch
    * Fix client disconnect event
    * Update weather interface to define update period, refresh and override
* Thu Sep 29 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.8:
    * Remove some debug message from indiserver.
    * Don't tell cfitsio about preallocated buffers.
    * Corrections for Pegasus Falcon Rotator.
    * Fix blob id conflit.
    * Adding wanderer cover v3.
    * Fix memory leaks in indiserver.
  - Drop add-hem27.patch
  - Drop fix-cfitsio.patch
  - Drop fix-ioptron-meridian.patch
  - Drop fix-ioptron-timeout.patch
  - Drop fix-pegasus.patch
* Wed Aug 17 2022 Paolo Stivanin <info@paolostivanin.com>
  - Add fix-cfitsio.patch: FITS files produced by INDI are invalid because there is extra data at the end of the file.
    Many software only read the first HDU are not affected, but other reject the file.
  - Add fix-pegasus.patch: Corrections for Pegasus Falcon Rotator.
* Sun Aug 14 2022 Paolo Stivanin <info@paolostivanin.com>
  - Add add-hem27.patch: add support for iOptron HEM27 mount.
* Thu Aug 04 2022 Paolo Stivanin <info@paolostivanin.com>
  - Add fix-ioptron-meridian.patch: add again in case a timeout is issued
    and iOptron returns it despite the flush. This is an attempt to read this buffer again.
  - Add fix-ioptron-timeout.patch: save meridian flip settings by default on change.
* Fri Jul 29 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.7:
    * INDI Receiver and rtl-sdr.
    * Ensure defensive check of UBP previous data to fix crash.
    * Fast blob transfer.
    * More AP changes: UDP, Home, Encoder Status, version major/minor.
    * Fix memory leak when converting blob to base64.
    * Use 8bits samples in the lookup table.
    * Adding some basic PEC status and control to lx200gemini.
    * Add Servo Precision control.
    * Added RA/DEC guide speed.
    * Fixed a bug where PEC was always enabled on startup.
    * Various other fixes.
* Sat May 21 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.6:
    * add lastparked logic
    * Fixing UTC Offset format allowing :SGHH:MM# where MM can be 00, 30 and 45
    * Terminate commands missing #, introduce PEC recording and status
    * fix issue reading worm position
    * UTC uninitialized structure fix
    * Add mount status. Start CP5
    * Remove user choice for CM/CMR
    * Allow any guide rate between 0.1x and 1x
    * Driver for WandererRotatorLite
* Thu Mar 10 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.5:
    * Fixed updating of slew rate
    * Add missing find_package for Qt5Core
    * Fix setObjectRA and setObjectDEC for short and long format
    * Allow Minutes Past Meridia +/- 180 degrees
    * Adding new NexDome Beaver INDI driver
    * Add and apply Meade Protocol spec definitions
    * Add Pier Side Status for lx200zeq25
    * Updated version of the AstroPhysics driver
    * Fix Celestron focuser crash after calibration
    * Fix but setting AP UTC
    * Fix similar negative sign bug in AP driver
    * Initial implementation for capture format and encode format
    * Update driver interface when the LX200 support a focuser
    * Add CEM70(G)-EC identifier and a deprecation note
    * Add Driver for Esatto with Arco (goto, abort, sync, cal)
  - Remove 0001-Fix-warnings.patch
* Tue Jan 18 2022 Paolo Stivanin <info@paolostivanin.com>
  - Update to 1.9.4:
    * OnStep: Don't show focuser tab unless found.
    * More Lynx fixes - Step Size and Devices Types.
    * OnStep: Remove Focuser on disconnect.
    * Save Alignment Data to mount before sync.
    * CCD drivers: snooping for standard epoch positions and issues
      with fast exposure mode fixed.
    * SkyWatcher Alt-Az iterative GOTO.
    * Add Bayer frames software binning
    * Add driver for Rigelsys/Astrogene1000 nFrame rotator.
    * Send command at start to flush serial line for Pulsar/Rigel dome.
  - Remove ioptron_fixes.patch

Files

/usr/lib64/libindiclient.so.2
/usr/lib64/libindiclient.so.2.1.1

Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Jan 12 01:37:12 2025