From: "Randy.Dunlap" <rddunlap@osdl.org>
PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers don't
reply to emails and haven't touched it in awhile. Can't even config it to
try to build it without other patches to the kernel tree.
bk-rm-script:
#! /bin/sh
bk rm -r ./arch/i386/mach-pc9800
bk rm -r ./arch/i386/boot98
bk rm ./drivers/char/lp_old98.c
bk rm ./drivers/serial/serial98.c
bk rm ./drivers/scsi/scsi_pc98.c
bk rm ./drivers/scsi/pc980155.c
bk rm ./drivers/scsi/pc980155.h
bk rm ./drivers/block/floppy98.c
bk rm ./drivers/input/keyboard/98kbd.c
bk rm ./drivers/input/serio/98kbd-io.c
bk rm ./drivers/input/misc/98spkr.c
bk rm ./drivers/input/mouse/98busmouse.c
bk rm ./drivers/ide/legacy/pc9800.c
bk rm ./drivers/ide/legacy/hd98.c
bk rm -r ./include/asm-i386/mach-pc9800
bk rm ./include/asm-i386/pc9800_sca.h
bk rm ./include/asm-i386/pc9800.h
bk rm ./fs/partitions/nec98.c
bk rm ./fs/partitions/nec98.h
bk rm ./sound/isa/cs423x/pc98.c
bk rm ./sound/isa/cs423x/pc9801_118_magic.h
bk rm ./sound/isa/cs423x/sound_pc9800.h
---
25-akpm/drivers/block/Kconfig | 9 -----
25-akpm/drivers/char/Kconfig | 22 -------------
25-akpm/drivers/char/Makefile | 1
25-akpm/drivers/ide/Kconfig | 20 ------------
25-akpm/drivers/ide/Makefile | 1
25-akpm/drivers/input/keyboard/Kconfig | 12 -------
25-akpm/drivers/input/misc/Kconfig | 4 --
25-akpm/drivers/input/mouse/Kconfig | 11 ------
25-akpm/drivers/input/mouse/Makefile | 1
25-akpm/drivers/input/serio/Kconfig | 10 ------
25-akpm/drivers/net/Kconfig | 52 ---------------------------------
25-akpm/drivers/net/Makefile | 1
25-akpm/drivers/scsi/Kconfig | 12 -------
25-akpm/drivers/scsi/Makefile | 2 -
25-akpm/drivers/serial/Kconfig | 13 --------
25-akpm/drivers/serial/Makefile | 1
25-akpm/fs/partitions/Kconfig | 7 ----
25-akpm/fs/partitions/check.c | 1
25-akpm/sound/isa/Kconfig | 10 ------
25-akpm/sound/isa/cs423x/Makefile | 2 -
20 files changed, 4 insertions(+), 188 deletions(-)
diff -puN drivers/block/Kconfig~kill-off-pc9800 drivers/block/Kconfig
--- 25/drivers/block/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.354125512 -0700
+++ 25-akpm/drivers/block/Kconfig 2004-05-23 01:42:23.383121104 -0700
@@ -6,7 +6,7 @@ menu "Block devices"
config BLK_DEV_FD
tristate "Normal floppy disk support"
- depends on (!X86_PC9800 && !ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN)
+ depends on (!ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN)
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
@@ -26,13 +26,6 @@ config ATARI_FLOPPY
tristate "Atari floppy support"
depends on ATARI
-config BLK_DEV_FD98
- tristate "NEC PC-9800 floppy disk support"
- depends on X86_PC9800
- ---help---
- If you want to use the floppy disk drive(s) of NEC PC-9801/PC-9821,
- say Y.
-
config BLK_DEV_SWIM_IOP
bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
depends on MAC && EXPERIMENTAL && BROKEN
diff -puN drivers/char/Kconfig~kill-off-pc9800 drivers/char/Kconfig
--- 25/drivers/char/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.356125208 -0700
+++ 25-akpm/drivers/char/Kconfig 2004-05-23 01:42:23.384120952 -0700
@@ -586,17 +586,6 @@ config HVC_CONSOLE
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
-config PC9800_OLDLP
- tristate "NEC PC-9800 old-style printer port support"
- depends on X86_PC9800 && !PARPORT
- ---help---
- If you intend to attach a printer to the parallel port of NEC PC-9801
- /PC-9821 with OLD compatibility mode, Say Y.
-
-config PC9800_OLDLP_CONSOLE
- bool "Support for console on line printer"
- depends on PC9800_OLDLP
-
config QIC02_TAPE
tristate "QIC-02 tape support"
help
@@ -740,7 +729,7 @@ config NVRAM
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !X86_PC9800 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -793,15 +782,6 @@ config EFI_RTC
bool "EFI Real Time Clock Services"
depends on IA64
-config RTC98
- tristate "NEC PC-9800 Real Time Clock Support"
- depends on X86_PC9800
- default y
- ---help---
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock (or hardware clock) built
-
config H8
bool "Tadpole ANA H8 Support (OBSOLETE)"
depends on OBSOLETE && ALPHA_BOOK1
diff -puN drivers/char/Makefile~kill-off-pc9800 drivers/char/Makefile
--- 25/drivers/char/Makefile~kill-off-pc9800 2004-05-23 01:42:23.357125056 -0700
+++ 25-akpm/drivers/char/Makefile 2004-05-23 01:42:23.384120952 -0700
@@ -47,7 +47,6 @@ obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
-obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o
obj-$(CONFIG_DTLK) += dtlk.o
obj-$(CONFIG_R3964) += n_r3964.o
diff -puN drivers/ide/Kconfig~kill-off-pc9800 drivers/ide/Kconfig
--- 25/drivers/ide/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.359124752 -0700
+++ 25-akpm/drivers/ide/Kconfig 2004-05-23 01:42:23.385120800 -0700
@@ -97,25 +97,7 @@ comment "Please see Documentation/ide.tx
config BLK_DEV_HD_IDE
bool "Use old disk-only driver on primary interface"
- depends on ((X86 && X86_PC9800!=y) || SH_MPC1211)
- ---help---
- There are two drivers for MFM/RLL/IDE disks. Most people use just
- the new enhanced driver by itself. This option however installs the
- old hard disk driver to control the primary IDE/disk interface in
- the system, leaving the new enhanced IDE driver to take care of only
- the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from
- having an IDE/ATAPI CD-ROM or tape drive connected to the primary
- IDE interface. Choosing this option may be useful for older systems
- which have MFM/RLL/ESDI controller+drives at the primary port
- address (0x1f0), along with IDE drives at the secondary/3rd/4th port
- addresses.
-
- Normally, just say N here; you will then use the new driver for all
- 4 interfaces.
-
-config BLK_DEV_HD_IDE98
- bool "Use old disk-only driver on primary interface"
- depends on X86 && X86_PC9800
+ depends on (X86 || SH_MPC1211)
---help---
There are two drivers for MFM/RLL/IDE disks. Most people use just
the new enhanced driver by itself. This option however installs the
diff -puN drivers/ide/Makefile~kill-off-pc9800 drivers/ide/Makefile
--- 25/drivers/ide/Makefile~kill-off-pc9800 2004-05-23 01:42:23.360124600 -0700
+++ 25-akpm/drivers/ide/Makefile 2004-05-23 01:42:23.386120648 -0700
@@ -29,7 +29,6 @@ ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide
ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o
# built-in only drivers from legacy/
-ide-core-$(CONFIG_BLK_DEV_IDE_PC9800) += legacy/pc9800.o
ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o
ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o
ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o
diff -puN drivers/input/keyboard/Kconfig~kill-off-pc9800 drivers/input/keyboard/Kconfig
--- 25/drivers/input/keyboard/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.361124448 -0700
+++ 25-akpm/drivers/input/keyboard/Kconfig 2004-05-23 01:42:23.386120648 -0700
@@ -96,15 +96,3 @@ config KEYBOARD_AMIGA
To compile this driver as a module, choose M here: the
module will be called amikbd.
-
-config KEYBOARD_98KBD
- tristate "NEC PC-9800 Keyboard support"
- depends on X86_PC9800 && INPUT && INPUT_KEYBOARD
- select SERIO
- help
- Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
- compatible) on your system.
-
- To compile this driver as a module, choose M here: the
- module will be called 98kbd.
-
diff -puN drivers/input/misc/Kconfig~kill-off-pc9800 drivers/input/misc/Kconfig
--- 25/drivers/input/misc/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.362124296 -0700
+++ 25-akpm/drivers/input/misc/Kconfig 2004-05-23 01:42:23.386120648 -0700
@@ -40,10 +40,6 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K && INPUT && INPUT_MISC
-config INPUT_98SPKR
- tristate "PC-9800 Speaker support"
- depends on X86_PC9800 && INPUT && INPUT_MISC
-
config INPUT_UINPUT
tristate "User level driver support"
depends on INPUT && INPUT_MISC
diff -puN drivers/input/mouse/Kconfig~kill-off-pc9800 drivers/input/mouse/Kconfig
--- 25/drivers/input/mouse/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.364123992 -0700
+++ 25-akpm/drivers/input/mouse/Kconfig 2004-05-23 01:42:23.387120496 -0700
@@ -130,14 +130,3 @@ config MOUSE_VSXXXAA
described in the source file). This driver should, in theory,
also work with the digitizer DEC produced, but it isn't tested
with that (I don't have the hardware yet).
-
-config MOUSE_PC9800
- tristate "NEC PC-9800 busmouse"
- depends on X86_PC9800 && INPUT && INPUT_MOUSE && ISA
- help
- Say Y here if you have NEC PC-9801/PC-9821 computer and want its
- native mouse supported.
-
- To compile this driver as a module, choose M here: the
- module will be called 98busmouse.
-
diff -puN drivers/input/mouse/Makefile~kill-off-pc9800 drivers/input/mouse/Makefile
--- 25/drivers/input/mouse/Makefile~kill-off-pc9800 2004-05-23 01:42:23.365123840 -0700
+++ 25-akpm/drivers/input/mouse/Makefile 2004-05-23 01:42:23.387120496 -0700
@@ -10,7 +10,6 @@ obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
-obj-$(CONFIG_MOUSE_PC9800) += 98busmouse.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
diff -puN drivers/input/serio/Kconfig~kill-off-pc9800 drivers/input/serio/Kconfig
--- 25/drivers/input/serio/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.366123688 -0700
+++ 25-akpm/drivers/input/serio/Kconfig 2004-05-23 01:42:23.387120496 -0700
@@ -97,16 +97,6 @@ config SERIO_SA1111
tristate "Intel SA1111 keyboard controller"
depends on SA1111 && SERIO
-config SERIO_98KBD
- tristate "NEC PC-9800 keyboard controller"
- depends on X86_PC9800 && SERIO
- help
- Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
- standard keyboard connected to its keyboard controller.
-
- To compile this driver as a module, choose M here: the
- module will be called 98kbd-io.
-
config SERIO_GSCPS2
tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
depends on GSC && SERIO
diff -puN drivers/net/Kconfig~kill-off-pc9800 drivers/net/Kconfig
--- 25/drivers/net/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.368123384 -0700
+++ 25-akpm/drivers/net/Kconfig 2004-05-23 01:42:23.389120192 -0700
@@ -922,7 +922,7 @@ config HP100
config NET_ISA
bool "Other ISA cards"
- depends on NET_ETHERNET && ISA && !X86_PC9800
+ depends on NET_ETHERNET && ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
@@ -1105,56 +1105,6 @@ config SK_G16
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-config NET_CBUS
- bool "NEC PC-9800 C-bus cards"
- depends on NET_ETHERNET && ISA && X86_PC9800
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is NEC PC-9800 C-Bus, say Y.
-
-config NE2K_CBUS
- tristate "Most NE2000-based Ethernet support"
- depends on NET_CBUS
- select CRC32
-
-config NE2K_CBUS_EGY98
- bool "Melco EGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_LGY98
- bool "Melco LGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_ICM
- bool "ICM IF-27xxET support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_IOLA98
- bool "I-O DATA LA-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL
- bool "Contec C-NET(98)E/L support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL_IO_BASE
- hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
- depends on NE2K_CBUS_CNET98EL
- default "0xaaed"
-
-config NE2K_CBUS_ATLA98
- bool "Allied Telesis LA-98 Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_BDN
- bool "ELECOM Laneed LD-BDN[123]A Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_NEC108
- bool "NEC PC-9801-108 Support"
- depends on NE2K_CBUS
-
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA && BROKEN
diff -puN drivers/net/Makefile~kill-off-pc9800 drivers/net/Makefile
--- 25/drivers/net/Makefile~kill-off-pc9800 2004-05-23 01:42:23.369123232 -0700
+++ 25-akpm/drivers/net/Makefile 2004-05-23 01:42:23.390120040 -0700
@@ -78,7 +78,6 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390.o
-obj-$(CONFIG_NE2K_CBUS) += ne2k_cbus.o 8390.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
obj-$(CONFIG_HPLAN) += hp.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
diff -puN drivers/scsi/Kconfig~kill-off-pc9800 drivers/scsi/Kconfig
--- 25/drivers/scsi/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.370123080 -0700
+++ 25-akpm/drivers/scsi/Kconfig 2004-05-23 01:42:23.392119736 -0700
@@ -1710,18 +1710,6 @@ config SCSI_SUNESP
To compile this driver as a module, choose M here: the
module will be called esp.
-config SCSI_PC980155
- tristate "NEC PC-9801-55 SCSI support"
- depends on X86_PC9800 && SCSI
- help
- If you have the NEC PC-9801-55 SCSI interface card or compatibles
- for NEC PC-9801/PC-9821, say Y.
-
-config WD33C93_PIO
- bool
- depends on SCSI_PC980155
- default y
-
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
config ZFCP
diff -puN drivers/scsi/Makefile~kill-off-pc9800 drivers/scsi/Makefile
--- 25/drivers/scsi/Makefile~kill-off-pc9800 2004-05-23 01:42:23.371122928 -0700
+++ 25-akpm/drivers/scsi/Makefile 2004-05-23 01:42:23.392119736 -0700
@@ -34,7 +34,6 @@ obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
-obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
@@ -142,7 +141,6 @@ scsi_mod-y += scsi.o hosts.o scsi_ioct
scsi_devinfo.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
-scsi_mod-$(CONFIG_X86_PC9800) += scsi_pc98.o
sd_mod-objs := sd.o
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
diff -puN drivers/serial/Kconfig~kill-off-pc9800 drivers/serial/Kconfig
--- 25/drivers/serial/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.373122624 -0700
+++ 25-akpm/drivers/serial/Kconfig 2004-05-23 01:42:23.393119584 -0700
@@ -517,19 +517,6 @@ config V850E_UART_CONSOLE
depends on V850E_UART
select SERIAL_CORE_CONSOLE
-config SERIAL98
- tristate "PC-9800 8251-based primary serial port support"
- depends on X86_PC9800
- select SERIAL_CORE
- help
- If you want to use standard primary serial ports on PC-9800,
- say Y. Otherwise, say N.
-
-config SERIAL98_CONSOLE
- bool "Support for console on PC-9800 standard serial port"
- depends on SERIAL98=y
- select SERIAL_CORE_CONSOLE
-
config SERIAL_SH_SCI
tristate "SH SCI(F) serial port support"
depends on SUPERH || H8300
diff -puN drivers/serial/Makefile~kill-off-pc9800 drivers/serial/Makefile
--- 25/drivers/serial/Makefile~kill-off-pc9800 2004-05-23 01:42:23.374122472 -0700
+++ 25-akpm/drivers/serial/Makefile 2004-05-23 01:42:23.393119584 -0700
@@ -33,7 +33,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328seria
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_V850E_UART) += v850e_uart.o
-obj-$(CONFIG_SERIAL98) += serial98.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
diff -puN fs/partitions/check.c~kill-off-pc9800 fs/partitions/check.c
--- 25/fs/partitions/check.c~kill-off-pc9800 2004-05-23 01:42:23.375122320 -0700
+++ 25-akpm/fs/partitions/check.c 2004-05-23 01:42:23.394119432 -0700
@@ -29,7 +29,6 @@
#include "ldm.h"
#include "mac.h"
#include "msdos.h"
-#include "nec98.h"
#include "osf.h"
#include "sgi.h"
#include "sun.h"
diff -puN fs/partitions/Kconfig~kill-off-pc9800 fs/partitions/Kconfig
--- 25/fs/partitions/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.377122016 -0700
+++ 25-akpm/fs/partitions/Kconfig 2004-05-23 01:42:23.394119432 -0700
@@ -187,13 +187,6 @@ config LDM_DEBUG
If unsure, say N.
-config NEC98_PARTITION
- bool "NEC PC-9800 partition table support" if PARTITION_ADVANCED
- default y if !PARTITION_ADVANCED && X86_PC9800
- help
- Say Y here if you would like to be able to read the hard disk
- partition table format used by NEC PC-9800 machines.
-
config SGI_PARTITION
bool "SGI partition support" if PARTITION_ADVANCED
default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27)
diff -puN sound/isa/cs423x/Makefile~kill-off-pc9800 sound/isa/cs423x/Makefile
--- 25/sound/isa/cs423x/Makefile~kill-off-pc9800 2004-05-23 01:42:23.378121864 -0700
+++ 25-akpm/sound/isa/cs423x/Makefile 2004-05-23 01:42:23.394119432 -0700
@@ -8,7 +8,6 @@ snd-cs4236-lib-objs := cs4236_lib.o
snd-cs4231-objs := cs4231.o
snd-cs4232-objs := cs4232.o
snd-cs4236-objs := cs4236.o
-snd-pc98-cs4232-objs := pc98.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o
@@ -22,6 +21,5 @@ obj-$(CONFIG_SND_INTERWAVE_STB) += snd-c
obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-cs4231-lib.o
obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o
obj-$(CONFIG_SND_SSCAPE) += snd-cs4231-lib.o
-obj-$(CONFIG_SND_PC98_CS4232) += snd-pc98-cs4232.o snd-cs4231-lib.o
obj-m := $(sort $(obj-m))
diff -puN sound/isa/Kconfig~kill-off-pc9800 sound/isa/Kconfig
--- 25/sound/isa/Kconfig~kill-off-pc9800 2004-05-23 01:42:23.379121712 -0700
+++ 25-akpm/sound/isa/Kconfig 2004-05-23 01:42:23.395119280 -0700
@@ -51,16 +51,6 @@ config SND_CS4236
Say 'Y' or 'M' to include support for CS4235,CS4236,CS4237B,CS4238B,CS4239
chips from Cirrus Logic - Crystal Semiconductors.
-config SND_PC98_CS4232
- tristate "NEC PC9800 CS4232 driver"
- depends on SND && X86_PC9800
- select SND_OPL3_LIB
- select SND_MPU401_UART
- select SND_PCM
- help
- Say 'Y' or 'M' to include support for NEC PC-9801/PC-9821 on-board
- soundchip based on CS4232.
-
config SND_ES968
tristate "Generic ESS ES968 driver"
depends on SND && ISAPNP
_