| Red Hat Linux 6.1: The Official Red Hat Linux Reference Guide | ||
|---|---|---|
| Prev | Appendix B. General Parameters and Modules | Next |
Table B-5. Ethernet Module Parameters
| Hardware | Module | Parameters |
|---|---|---|
| 3Com 3c501 | 3c501.o | 3c501=io_port,IRQ |
| 3Com 3c503 and 3c503/16 | 3c503.o | 3c503=io_port,IRQ 3c503 io=io_port_1,io_port_n irq=IRQ_1,IRQ_n |
| 3Com EtherLink Plus (3c505) | 3c505.o | 3c505=io_port,IRQ,DMA 3c505 io=io_port_1,io_port_n irq=IRQ_1,IRQ_2 dma=dma_1,dma_n |
| 3Com EtherLink 16 | 3c507.o | 3c507=io_port,IRQ 3c507 io=io_port irq=IRQ |
| 3Com EtherLink III | 3c509.o | 3c509=IRQ |
| 3Com ISA EtherLink XL "Corkscrew" | 3c515.o | |
| 3Com EtherLink PCI III/XL Vortex (3c590, 3c592, 3c595, 3c597) Boomerang (3c900, 3c905, 3c595) | 3c59x.o | |
| Apricot 680x0 VME, 82596 chipset | 82596.o | 82596=IRQ 82596 irq=IRQ |
| Ansel Communications AC3200 EISA | ac3200.o | ac3200=io_port,IRQ ac3200 io=io_port_1,io_port_n irq=IRQ_1,IRQ_n |
| Alteon AceNIC Gigabit Ethernet driver | acenic.o | acenic=trace,link acenic trace=trace link=val |
| Allied Telesis AT1700 | at1700.o | at1700=io_port,IRQ at1700 io=io_port irq=IRQ |
| Tangent ATB-II, Novel NL-10000, Daystar Digital LT-200, Dayna DL2000, DaynaTalk PC (HL), COPS LT-95, Farallon PhoneNET PC II, III | cops.o | cops=io_port,IRQ cops io=io_port irq=IRQ |
| Modular driver for the COSA or SRP synchronous serial card | cosa.o | cosa=io_port,IRQ,dma |
| Crystal LAN CS8900/CS8920 | cs89x0.o | cs89x0=io_port,IRQ,MEDIA_TYPE cs89x0 io=io_port irq=IRQ media=TYPE |
| EtherWORKS DE425 TP/COAX EISA, DE434 TP PCI, DE435/450 TP/COAX/AUI PCI DE500 10/100 PCI Kingston, LinkSys, SMC8432, SMC9332, Znyx31[45], and Znyx346 10/100 cards with DC21040 (no SROM), DC21041[A], DC21140[A], DC21142, DC21143 chipsets | de4x5.o | de4x5=io_port de4x5 io=io_port de4x5 args='ethX[fdx] autosense=MEDIA_STRING' |
| D-Link DE-600 Ethernet Pocket Adapter | de600.o | |
| D-Link DE-620 Ethernet Pocket Adapter | de620.o | de620 io=io_port irq=IRQ bnc=1 utp=1 |
| DIGITAL DEPCA & EtherWORKS DEPCA, DE100, DE101, DE200 Turbo, DE201Turbo DE202 Turbo TP/BNC, DE210, DE422 EISA | depca.o | depca=io_port,IRQ depca io=io_port irq=IRQ |
| Digi Intl. RightSwitch SE-X EISA and PCI | dgrs.o | |
| Cabletron E2100 series ethercards | e2100.o | e2100=io_port,IRQ e2100 io=io_port irq=IRQ |
| Intel i82595 ISA EtherExpressPro10/10+ driver | eepro.o | eepro=io_port,IRQ,mem eepro io=io_port irq=IRQ mem=mem |
| Intel i82557/i82558 PCI EtherExpressPro driver | eepro100.o | |
| Intel EtherExpress 16 (i82586) | eexpress.o | eexpress=io_port,IRQ eexpress io=io_port irq=IRQ |
| SMC EtherPower II 9432 PCI (83c170/175 EPIC series) | epic100.o | |
| Racal-Interlan ES3210 EISA Network Adapter | es3210.o | es3210=io_port,IRQ,mem es3210 io=io_port irq=IRQ mem=mem |
| ICL EtherTeam 16i/32 | eth16i.o | eth16i=io_port,mediatype eth16i ioaddr=io_port mediatype=type |
| EtherWORKS 3 (DE203, DE204 and DE205) | ewrk3.o | ewrk=io_port,IRQ ewrk io=io_port irq=IRQ |
| Fujitsu FMV-181/182/183/184 | fmv18x.o | fmv18x=io_port,IRQ fmv18x io=io_port irq=IRQ |
| Modular driver for the Comtrol Hostess SV11 | hostess_sv11.o | hostess_sv11=io_port, IRQ, DMABIT hostess_sv11 io=io_port irq=IRQ dma=DMABIT |
| HP PCLAN/plus | hp-plus.o | hp-plus=io_port,IRQ hp-plus io=io_port irq=IRQ |
| HP LAN Ethernet | hp.o | hp=io_port,IRQ hp io=io_port irq=IRQ |
| 100VG-AnyLan Network Adapters HP J2585B, J2585A, J2970, J2973, J2573 Compex ReadyLink ENET100-VG4, FreedomLine 100/VG | hp100.o | hp100=io_port,name hp100 hp100_port=io_port hp100_name=name |
| IBM Token Ring 16/4 | ibmtr.o | ibmtr=io_port,IRQ,mem ibmtr io=io_port irq=IRQ mem=mem |
| AMD LANCE/PCnet Allied Telesis AT1500, HP J2405A, NE2100, NE2500 | lance.o | lance=io_port,IRQ,dma lance io=io_port_1,io_port_n irq=IRQ_1,IRQ_2 dma=dma_1,dma_n |
| Mylex LNE390 EISA cards (LNE390A, LNE390B) | lne390.o | lne390=io_port,IRQ,mem lne390 io=io_port irq=IRQ mem=mem |
| ltpc.o | ltpc=io_port,IRQ ltpc io=io_port irq=IRQ | |
| NE1000 / NE2000 (non-pci) | ne.o | ne=io_port,IRQ ne io=io_port irq=IRQ |
| PCI NE2000 cards RealTEk RTL-8029, Winbond 89C940, Compex RL2000, KTI ET32P2, NetVin, NV5000SC, Via 82C926, SureCom NE34 | ne2k-pci.o | |
| Novell NE3210 EISA Network Adapter | ne3210.o | ne3210=io_port,IRQ,mem ne3210 io=io_port irq=IRQ mem=mem |
| MiCom-Interlan NI5010 ethercard | ni5010.o | ni5010=io_port,IRQ ni5010 io=io_port irq=IRQ |
| NI5210 card (i82586 Ethernet chip) | ni52.o | ni52=io_port,IRQ ni52 io=io_port irq=IRQ |
| NI6510, ni6510 EtherBlaster | ni65.o | ni65=io_port,IRQ,dma ni65 io=io_port irq=IRQ dma=dma |
| AMD PCnet32 and AMD PCnetPCI | pcnet32.o | |
| RedCreek Communications PCI | rcpci.o | |
| RealTek cards using RTL8129 or RTL8139 Fast Ethernet chipsets | rtl8139.o | |
| Sangoma S502/S508 multi-protocol FR | sdla.o | |
| Sangoma S502A, ES502A, S502E, S503, S507, S508, S509 | sdladrv.o | |
| SysKonnect Token Ring ISA/PCI Adapter, TR4/16(+) ISA or PCI, TR4/16 PCI, and older SK NET TR4/16 ISA cards | sktr.o | sktr=io_port,IRQ,mem sktr io=io_port irq=IRQ mem=mem |
| SMC Ultra and SMC EtherEZ ISA ethercard (8K, 83c790) | smc-ultra.o | smc-ultra=io_port,IRQ smc-ultra io=io_port irq=IRQ |
| SMC Ultra32 EISA Ethernet card (32K) | smc-ultra32.o | |
| SMC 9000 series of Ethernet cards | smc9194.o | smc9194=io_port,IRQ smc9194 io=io_port irq=IRQ ifport=[0,1,2] |
| Compaq Netelligent 10/100 TX PCI UTP Compaq Netelligent 10 T PCI UTP Compaq Integrated NetFlex 3/P Compaq Netelligent Dual 10/100 TX PCI UTP Compaq Netelligent Integrated 10/100 TX UTP Compaq Netelligent 10/100 TX Embedded UTP Compaq Netelligent 10 T/2 PCI UTP/Coax Compaq Netelligent 10/100 TX UTP Compaq NetFlex 3/P Olicom OC-2325, OC-2183, OC-2326 | tlan.o | tlan=io_port,IRQ,aui,debug tlan io=io_port irq=IRQ Other Module Options: speed=10Mbs,100Mbs debug=0x0[1,2,4,8] aui=1 duplex=[1,2] |
| Digital 21x4x Tulip PCI Ethernet cards SMC EtherPower 10 PCI(8432T/8432BT) SMC EtherPower 10/100 PCI(9332DST) DEC EtherWorks 100/10 PCI(DE500-XA) DEC EtherWorks 10 PCI(DE450) DEC QSILVER's, Znyx 312 etherarray Allied Telesis LA100PCI-T Danpex EN-9400, Cogent EM110 | tulip.o | |
| VIA Rhine PCI Fast Ethernet cards with either the VIA VT86c100A Rhine-II PCI or 3043 Rhine-I D-Link DFE-930-TX PCI 10/100 | via-rhine.o | |
| AT&T GIS (nee NCR) WaveLan ISA Card | wavelan.o | wavelan=[IRQ,0],io_port,NWID |
| WD8003 and WD8013 "compatible" ethercards | wd.o | wd=io_port, IRQ, mem,mem_end wd io=io_port irq=IRQ mem=mem mem_end=end |
| Packet Engines Yellowfin | yellowfin.o | |
| G-NIC PCI Gigabit Ethernet adapter | ||
| Z8530 based HDLC cards for AX.25 | z85230.o |
Here are some examples of these modules in use:
Table B-6. Ethernet Parameter Configuration Examples
| Configuration | Example |
|---|---|
| NE2000 ISA card at IO address 300 and IRQ 11 | ne=0x300,11 ether=0x300,11,eth0 |
| Wavelan card at IO 390, autoprobe for IRQ, and use the NWID to 0x4321 | wavelan=0,0x390,0x4321 ether=0,0x390,0x4321,eth0 |
You can use multiple Ethernet cards in one machine. If each card uses a different driver (e.g., a 3c509 and a DE425), you simply need to add alias (and possibly options) lines for each card to /etc/conf.modules. See the section called Kernel Daemon Configuration in Chapter 3 for more information.
If any two Ethernet cards use the same driver (e.g., two 3c509's or a 3c595 and a 3c905), you will need to either give the two card addresses on the driver's options line (in the case of ISA cards), or (for PCI cards) simply add one alias line for each card.
http://metalab.unc.edu/LDP/HOWTO/Ethernet-HOWTO.html For more information about using more than one Ethernet card, see the Linux Ethernet-HOWTO at http://metalab.unc.edu/LDP/HOWTO/Ethernet-HOWTO.html. If you installed the howto package when you installed Red Hat Linux, you can find it in the file /usr/doc/HOWTO/Ethernet-HOWTO.